KTM 350 EXC-F 2022 Setup Instructions page 26

3 WORK
3.9
24
V01784-11
K00546-10
Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
H00935-10
(All special models)
–
2
Tighten screws .
Guideline
Screw, top triple
clamp
–
3
Tighten screws .
Guideline
Screw, bottom
triple clamp
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front M8
brake caliper
–
Mount the cable ties.
–
Position the brake line, the wiring harness, and the clamp.
Mount and tighten screws
Finishing work
–
Install the front wheel. (
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease ( p. 45)
–
Clean and lightly grease the wheel spindle.
Long-life grease ( p. 45)
–
Insert the spacers.
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
M8 17 Nm
(12.5 lbf ft)
M8 15 Nm
(11.1 lbf ft)
25 Nm (18.4 lbf ft)
Loctite ®
5
.
p. 24)
p. 21)
p. 22)
1
and contact surfaces
4
.
243™
A