Sennheiser 506824 Instruction Manual page 32

Using additional functions
32 | RS 5000
Hearing profile and balance protection
This setting is saved on the stethoset receiver, independent of the
transmitter you are using.
Make sure that your stethoset receiver's balance setting and
hearing profile are correctly adjusted (see page 23 and 24).
Make sure that the protected settings mode is activated (see
page 30).
Place the stethoset receiver into the transmitter's charging com-
partment.
Press the volume button
or deactivate the hearing profile and balance protection.
Status and display of
the protection
function
activated
nd
2 LED segment lit
deactivated*
nd
2 LED segment off
Save the setting by disconnecting the transmitter from the
power supply system (see page 30).
If you are using several stethoset receivers and want to pro-
tect the activated hearing profiles from accidental adjust-
ment, you can place the stethoset receivers, one after the
other, into the transmitter's charging compartment to acti-
vate the hearing profile and balance protection.
+ on the stethoset receiver to activate
Function/behavior
The activated hearing profile and the
balance setting cannot be changed/
deactivated.
The hearing profiles can be changed at any
Hearing profile
time by pressing the
button for 2 seconds. The balance setting
can be changed.
* factory setting