Sennheiser 506824 Instruction Manual page 12

Putting the RS 5000 into operation
12 | RS 5000
Connection possibility A: optical (digital)
A A
To achieve the best possible listening experience, connect the trans-
mitter to your TV or hi-fi system using the supplied optical digital
cable.
Note that your wireless headphone system only supports digital
signals coded in the
audio format of the connected audio source to PCM can be found in
the Sound menu or in the instruction manual of your device.
If an incompatible digital audio signal is being received, the
mitter status LED flashes white and blue. Audio cannot be repro-
duced.
* The appearance of the Sound menu can vary depending on the
Connect the optical digital cable to the pink digital audio input
Digital Optical In
your audio source.
PCM format. Information on how to set the
of the transmitter and to the optical output of
1A
Trans-
device you are using.
OPTICAL OUT