5-3 - Sekonic i-346 Operating Manual

1.800.561.8187
5. Measurement
5-3. Timer Measuring Mode
Measurement...(single...measurement)...
is...made...after...counting...the...set...timer...
seconds...in...advance.
1)... Press...the...Timer...Button ⑧ ,...and...
the...set...timer...seconds...in...advance...
appears...at...the...upper...right...corner...
of...the...LCD...to...enter...the...timer...
measuring...mode.
2)... Press...the...Up...Button ⑥ or...Down...
Button ⑦ to...set...the...timer...seconds...
used.
... ...Available...setting...range:...1...to...60...seconds.
3)... Press...the...Measuring...Button ④ to...start...counting.
... Measurement...is...made...after...counting...the...set...timer...seconds....(Single...
measurement).
Display example
●
The setting range for the timer is from 1 to 10 seconds (in 1
second step) and from 10 to 60 seconds (in 10 seconds step).
●
The set timer seconds is changed continuously by keeping
pressing the Up Button ⑥ or Down Button ⑦.
0
www.
④ Measuring...
... Button
MODE
⑥ Up...
... Button
⑦ Down...... ...
TIMER
... Button
⑧ Timer...Button
information@itm.com
.com