Device Information; Changing The Bands - Garmin APPROACH S70 Owner's Manual

Changing the Bands

1 Use a precision flat head screwdriver to push in the watch pin.
2 Remove the band from the watch.
3 Select an option:
• To install a new Approach S70 band, align one side of the new band with the holes on the watch, push in
the exposed watch pin, and press the band into place.
NOTE: Make sure the band is secure. The watch pin should align with the holes on the watch.
• To install a compatible QuickFit
watch pin on the watch, and press the new band into place.

Device Information

Device Information
® band, remove the watch pin from the Approach S70 band, replace the
53