Table of Contents
Advertisement
TG6700C(e).book Page 46 Thursday, May 25, 2006 11:57 AM
Answering System
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely by calling the selected line in
"Turning the answering system on" on
page 39.
1
Dial your phone number.
2
Let the phone ring 15 times.
L The unit answers your call with the
greeting message.
L You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 44).
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press {*} to skip the greeting
message and record your message after
the beep.
46
Answering system
settings
Ring count
You can change the number of times the
phone rings before the unit answers calls.
The default setting is "4".
"Toll saver": The unit answers on the
2nd ring when new messages have been
recorded, and on the 4th ring when there
are no new messages. If you call your
phone from outside to listen to new
messages (page 44), you will know that
there are no new messages when the
phone rings for the 3rd time. You can then
hang up without being charged for the call.
Handset
1
{MENU} i {0}{6}{1}
2
Select the desired line.
3
Select the desired setting. i {SAVE}
i {OFF}
For Voice Mail service subscribers
If you subscribe to a flat-rate service
package that includes Call Display, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please note
the following:
L To use the Voice Mail service provided
by your telephone service provider
rather than the unit's answering system,
turn off the answering system (page 39).
This unit does not have an indicator to
indicate if there are new messages in
your mailbox service.
Advertisement
Table of Contents
