Table of Contents
Advertisement
TG6700C(e).book Page 61 Thursday, May 25, 2006 11:57 AM
Answering system
Problem
I cannot listen to
messages from a remote
location.
The unit does not record
new messages.
I cannot operate the
answering system.
The message indicator
on the handset slowly
flashes in amber.
Cause/solution
L A touch tone phone is required for remote operation.
L Enter the remote code correctly (page 44).
L The answering system is off. Turn it on (page 46).
L The answering system is not turned on for the line you
wish to record messages from. Select the desired line
or both lines by pressing {LINE SELECT} repeatedly,
then turn the answering system on (page 39, 46).
L The recording time is set to "Greeting only". Select
a different setting (page 47).
L The message memory is full. Erase unnecessary
messages (page 41).
L The answering system is activated for both lines, and
the 1st caller is leaving a voice message. The 2nd caller
cannot leave a message, but the caller information will
be stored (page 32).
L If you subscribe to the Voice Mail service, messages
are recorded by the telephone service provider not your
telephone (page 46).
L Someone is operating the answering system.
L If someone is talking on a conference call, you cannot
operate the answering system. Try again later.
L New messages have been recorded. Listen to the new
messages (page 41, 42).
Useful Information
61
Advertisement
Table of Contents
