Table of Contents
Advertisement
Answering System
4
When finished, hang up.
Voice guidance
During remote operation, the unit's voice guidance
starts and prompts you to press 1 to perform a
specific operation, or press 2 to listen to more
available operations.
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the unit
disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for the
voice guidance to prompt you.
Key
Operation
1
Repeat message (during playback)
2
Skip message (during playback)
4
Play new messages
5
Play all messages
9
Stop playback
0
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*#
End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Turning on the answering system
remotely
If the answering system is off, you can turn it on
remotely.
1
Dial your phone number from a touch-tone
phone.
2
Let the phone ring 15 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 33).
34
TG477xC(en-en)_1214_ver021.pdf
*1
34
Answering system settings
Number of rings before the unit
answers a call
You can change the number of times the phone
rings "Ring count" before the unit answers
calls. You can select 2 to 7 rings, or "Toll
saver".
The default setting is "4 rings".
"Toll saver": The unit's answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end of
the 5th ring when there are no new messages. If
you call your phone from outside to listen to new
messages (page 33), you know that there are no
new messages when the phone rings for the 3rd
time. You can then hang up without being charged
for the call.
Handset
1
MMENUN#211
2
MbN: Select the desired setting. a MSAVEN
a MOFFN
For Voice Mail service subscribers
If you subscribe to a flat-rate service package that
includes Call Display, Call Waiting, Voice Mail, and
unlimited local/regional/long distance calls, please
note the following:
R To use the Voice Mail service provided by your
service provider/telephone company rather than
the unit's answering system, turn off the
answering system (page 31).
R To use this unit's answering system rather than
the Voice Mail service provided by your service
provider/telephone company, please contact
your service provider/telephone company to
deactivate your Voice Mail service.
If your service provider/telephone company
cannot do this:
– Set this unit's "Ring count" setting so that
this unit's answering system answers calls
before the Voice Mail service of your service
provider/telephone company does. It is
necessary to check the number of rings
required to activate the Voice Mail service
provided by your service provider/telephone
company before changing this setting.
– Change the number of rings of the Voice Mail
service so that the answering system can
2011/12/14
16:37:36
Advertisement
Table of Contents
