Toyota Camry 2014 Manual page 221

Example:
Approaching vehicle
Fast
Slow
■
The Blind Spot Monitor function is operational when
●
The BSM main switch is set to on
●
Vehicle speed is greater than approximately 10 mph (16 km/h).
■
The Blind Spot Monitor function will detect a vehicle when
●
A vehicle in an adjacent lane overtakes your vehicle.
●
Another vehicle enters the detection area when it changes lanes.
■
Conditions under which the Blind Spot Monitor function will not detect
a vehicle
The Blind Spot Monitor function is not designed to detect the following types
of vehicles and/or objects:
●
Small motorcycles, bicycles, pedestrians etc.*
●
Vehicles traveling in the opposite direction
●
Guardrails, walls, signs, parked vehicles and similar stationary objects*
●
Following vehicles that are in the same lane*
●
Vehicles driving 2 lanes across from your vehicle*
*: Depending on conditions, detection of a vehicle and/or object may occur.
2-4. Using other driving systems
Speed
18 mph (28 km/h)
5 mph (8 km/h)
Approximate alert
distance
65 ft. (20 m)
18 ft. (5.5 m)
221
2