Toyota Camry 2014 Manual page 183

■
The brightness of the instrument panel lights
When the tail lights are turned on, the meter's brightness will be reduced
slightly unless the meter brightness level adjustment is set to the brightest
setting.
If the tail lights are turned on when the surroundings are dark, the meter's
brightness will reduce slightly. However, when the surroundings are bright,
such as during the daytime, the meter's brightness will not be reduced even
if the tail lights are turned on.
■
Fuel gauge and odometer/trip meter display remain on mode
After the "POWER" switch has been turned off, the fuel gauge and odome-
ter/trip meter display remain on for 10 minutes, enabling the fuel gauge and
odometer/trip meter values to be checked again without having to turn the
"POWER" switch to ON mode.
When confirming the gauges and meters, turn the headlight switch to the
position. Press the display change button to change between the
odometer and trip meter displays.
NOTICE
■
To prevent damage to the engine and its components
The engine may be overheating if the rightmost segment of the engine cool-
ant temperature display is flashing. In this case, immediately stop the vehicle
in a safe place, and check the engine after it has cooled completely.

( P. 475)
2-2. Instrument cluster
183
2