Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column When driving Driving, stopping and safe-driving information Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 2: Table Of Contents
TABLE OF CONTENTS Index 1-4. Opening and closing the Before driving windows and moon roof Power windows....145 Quarter windows....149 1-1. Key information Moon roof ......151 Keys ........32 1-5. Refueling 1-2. Opening, closing and locking Opening the fuel tank the doors cap........
Page 3 2-4. Using other driving systems When driving Cruise control ..... 297 Dynamic radar cruise control ......302 2-1. Driving procedures Intuitive parking assist ..318 Driving the vehicle....214 Rear view monitor Engine (ignition) switch system......325 (vehicles without a smart Driving assist systems..
Page 4 TABLE OF CONTENTS Index ® 3-3. Using the Bluetooth audio Interior features system ® Bluetooth audio system ......486 3-1. Using the air conditioning ® Using the Bluetooth system and defogger audio system ....490 Front manual air ® Operating a Bluetooth conditioning system..
Page 5 3-5. Using the hands-free phone 3-7. Using the storage features system (for cellular phone) List of storage features..588 • Glove boxes ..... 589 Hands-free phone system • Console box ..... 591 (for cellular phone) • Overhead console .... 594 features......
Page 6 TABLE OF CONTENTS Index Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers.... 736 the vehicle exterior ... 648 If your vehicle needs Cleaning and protecting to be towed ....... 737 the vehicle interior ....
Page 7 Vehicle specifications Index 6-1. Specifications Abbreviation list ....854 Maintenance data (fuel, oil level, etc.).... 798 Alphabetical index.... 856 Fuel information ....810 Tire information ....814 What to do if..... 867 6-2. Customization Customizable features ..828 6-3. Initialization Items to initialize ....
Page 8 Pictorial index Exterior  Windshield wipers P. 286 Moon roof P. 151  Antenna P. 483 Outside rear view mirrors P. 141 Hood P. 669  Side turn signal lights P. 243 Headlights (high beam) Front turn signal/parking and  and daytime running lights front side marker lights P.
Page 9 Rear window defogger P. 421 Fuel filler door P. 156  Roof luggage carrier P. 360 Sliding doors P. 67 Rear window wiper P. 294 Front doors P. 60 Back door P. 82 Tires License plate lights ●Rotation P. 688 ●Replacement P.
Page 10 Pictorial index Interior Seat belts Head restraints P. 129 P. 126 Power window switches P. 145 SRS driver airbag P. 170  Sunshades P. 619 SRS front passenger airbag P. 170 Cup holders P. 595 Quarter windows P. 149 Bottle holders P.
Page 11 Vehicles without overhead consoles Vanity mirrors Front personal lights Rear personal light P. 607 P. 586 P. 586 SRS curtain shield airbags Sun visors P. 170 P. 606 Rear air conditioning system Inside rear view P. 414 mirror P. 139 Assist grips P.
Page 12 Pictorial index Interior Vehicles with overhead consoles Personal/interior light main switch P. 583  Personal/interior lights Rear ceiling lights P. 584  Power back door switch P. 83 P. 586  Power sliding door switches P. 68  Moon roof switches P.
Page 13  Driving position memory switches P. 121 Inside lock button P. 61 Door lock switch Window lock switch P. 61 P. 145 Power window switches P. 145  : If equipped SIENNA_OM_OM45483U_(U)
Page 14 Pictorial index Interior Vehicles with a console box type A Console box P. 591  Cup holders P. 595 Auxiliary box P. 601   A/V input port Power outlet (120 V AC) P. 532 P. 610 Cup holders P. 595 SIENNA_OM_OM45483U_(U)
Page 15 Vehicles with a console box type B Console box P. 591 Cup holders P. 595  Cup holders P. 595 Auxiliary box P. 601   A/V input port P. 532 Power outlet (120 V AC) P. 610  Auxiliary box P.
Page 16 Pictorial index Instrument panel Windshield wiper and washer switch P. 286 Rear window wiper and washer switch P. 294  Headlight switch Multi-information display P. 270 P. 256  Turn signal lever P. 243 Clock P. 608  Fog light switch P.
Page 17 Power quarter window Intuitive parking assist   switch P. 149 switch P. 318 Outside rear view mirror Headlight beam level  switches P. 141 control dial P. 273  BSM main switch P. 348 VSC OFF switch P. 333 ...
Page 18 Pictorial index Instrument panel * Telephone switch P. 551 Audio remote control  switches P. 479 * Talk switch P. 551  Distance switch P. 302  Cruise control switch P. 297, 302 Engine (ignition) switch (vehicles without a smart key system) P.
Page 19 Emergency flasher switch P. 736 Shift lever P. 238 Shift lock override button P. 778 Engine (ignition) switch (vehicles with a smart key system) P. 231  : If equipped : Refer to “NAVIGATION SYSTEM OWNER’S MANUAL”. SIENNA_OM_OM45483U_(U)
Page 20: Instrument Panel
Pictorial index Instrument panel Vehicles with a manual air conditioning system Air conditioning system P. 396 Rear window defogger switch P. 421 Vehicles with an automatic air conditioning system Air conditioning system P. 404 Rear window defogger switch P. 421 SIENNA_OM_OM45483U_(U)
Page 21 Type A  Auxiliary box P. 601 Multi-information display switches P. 257 Cup holders Power outlet P. 595 (12 V) P. 610 Auxiliary box P. 601 Power outlet (12 V) P. 610 AUX port P. 478 Type B  Seat heater switches P.
Page 22 Pictorial index Luggage compartment  P. 111, 114 Power third seat switches  Power back door switch Back door handle P. 82 P. 82 Cargo net hooks P. 624 Grocery bag hooks P. 620 Grocery bag hooks P. 620 Removable center seat Grocery bag hooks P.
Page 23  : If equipped SIENNA_OM_OM45483U_(U)
Page 24: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 25 ● Cruise control system ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. SIENNA_OM_OM45483U_(U)
Page 26 ● Usage of date collected through Safety Connect (U.S. mainland only) If your Toyota has Safety Connect and if you have subscribed to those ser- vices, please refer to the Safety Connect Telematics Subscription Service Agreement for information on data collected and its usage.
Page 27 Event data recorder This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
Page 28 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a govern- ment agency •...
Page 29 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 30 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 31: Before Driving
Before driving 1-1. Key information 1-4. Opening and closing the windows and moon roof Keys ........32 Power windows ....145 1-2. Opening, closing and locking Quarter windows ....149 the doors Moon roof......151 Smart key system ....36 1-5.
Page 32: 1-1. Key Information
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without a smart key system (type A) Master keys Valet key Key number plate Vehicles without a smart key system (type B) Master keys (black) Valet key (gray) Key number plate Vehicles with a smart key system Electronic keys...
Page 33 1-1. Key information Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, push the release button and take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side.
Page 34 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key (without a smart key system) or mechanical key (with a smart key system) is lost, a new key can be made by your Toyota dealer using the key number plate. (P. 780) ■...
Page 35 When a vehicle key is lost (vehicles with a smart key system) If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
Page 36: 1-2. Opening, Closing And Locking The Doors
1-2. Opening, closing and locking the doors  Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors (P. 37) Locks and unlocks the doors (P.
Page 37 1-2. Opening, closing and locking the doors Unlocking and locking the doors Front door handles Grip the driver’s door handle to unlock the door. Grip the passen- ger’s door handle to unlock all the doors. Make sure to touch the sensor on the back of the handle.
Page 38 1-2. Opening, closing and locking the doors Back door Press the unlock button to unlock all the doors. The door cannot be unlocked for 3 seconds after the door is locked. Lock the back door again when you leave the vehicle. The back door will not lock automatically after it has been opened and then closed.
Page 39 1-2. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas outside cabin Antennas inside cabin Antenna outside luggage com- partment SIENNA_OM_OM45483U_(U)
Page 40 1-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlock- ing the doors The system can be oper- ated when the electronic key is within about 2.3 ft. (0.7 m) of either of the front outside door handles.
Page 41 1-2. Opening, closing and locking the doors ■ Alarms and warning indicators A combination of exterior and interior alarms as well as warnings shown on the multi-information display are used to prevent theft of the vehicle and unforeseeable accidents resulting from erroneous operation. Perform the appropriate correction procedure described in the following table.
Page 42 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The “ENGINE START STOP” switch was turned to ACCESSORY mode Turn the “ENGINE Interior alarm while the driver’s door was START STOP” switch pings continu- open (or the driver’s door OFF and close the ously was opened while the...
Page 43 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The electronic key has a Replace the electronic low battery key battery An attempt was made to Interior alarm start the engine without the Start the engine with pings once electronic key being the electronic key present, or the electronic...
Page 44 1-2. Opening, closing and locking the doors ■ Switching the door unlock function It is possible to set which doors the entry function unlocks using the wireless remote control. STEP Turn the “ENGINE START STOP” switch off. STEP When the indicator on the key surface is not on, press and hold for about 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
Page 45 1-2. Opening, closing and locking the doors ■ Battery-saving function In the following circumstances, the entry function is disabled in order to pre- vent the vehicle battery from discharging and the electronic key battery from discharging. ● When the entry function has not been used for 5 days or more ●...
Page 46 1-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly.
Page 47 1-2. Opening, closing and locking the doors ● If window tint with a metallic content or metallic objects are attached to the rear window ● Vehicles with AUTO ACCESS SEAT: If the wireless remote control of the AUTO ACCESS SEAT is operated simultaneously, the AUTO ACCESS SEAT may not operate properly.
Page 48 1-2. Opening, closing and locking the doors ■ Note for locking the doors ● Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ● When the lock operation is performed using the lock sensor, recognition signals will be shown up to two consecutive times.
Page 49 1-2. Opening, closing and locking the doors ■ Notes for the unlocking function ● Gripping the front door handle when wearing a glove may not unlock or lock the door. ● A sudden approach to the effective range or door handle operation may prevent the doors from being unlocked.
Page 50 • Cellular phones, cordless phones and battery chargers • Induction cookers • Table lamps ■ When the electronic key battery is fully depleted P. 708 ■ Customization that can be configured at Toyota dealer Settings (e.g. smart key system) can be changed. (Customizable features: P. 828) SIENNA_OM_OM45483U_(U)
Page 51 1-2. Opening, closing and locking the doors ■ Certification for the smart key system U.S.A. FCC ID: HYQ14ADR FCC ID: HYQ14AEH FCC ID: HYQ13CZM FCC ID: HYQ13CZN FCC ID: NI4TMLF8-20 NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 52 (P. 40) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
Page 53: Wireless Remote Control
1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle. Vehicles without a smart key system (type A) Locks all doors Unlocks all doors Pressing the button unlocks the driver’s side doors.
Page 54 1-2. Opening, closing and locking the doors Vehicles without a smart key system (type B) Locks all doors Unlocks all doors Pressing the button unlocks the driver’s side doors. Press- ing the button again within 3 seconds unlocks the other doors.
Page 55 1-2. Opening, closing and locking the doors Vehicles with a smart key system Locks all doors Unlocks all doors Pressing the button unlocks the driver’s side doors. Press- ing the button again within 3 seconds unlocks the other doors. Opens and closes the left side power sliding door (press and hold) Opens and closes the right...
Page 56 1-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Back door: A buzzer sounds and the emergency flashers flash twice to indicate that the back door has been opened/closed.
Page 57 1-2. Opening, closing and locking the doors ■ Security feature If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again. ■ Power sliding door operation (vehicles with power sliding door) Even if the door is locked, pressing and holding the sliding door buttons will unlock all doors and start open operation.
Page 58 1-2. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ● Near a TV tower, radio station, electric power plant, airport or other facil- ity that generates strong radio waves ●...
Page 59 ■ When the electronic key battery is fully depleted P. 708 ■ Customization that can be configured at Toyota dealer Settings (e.g. operation signal) can be changed. (Customizable features: P. 828) ■ Certification for wireless remote control (vehicles without a smart key...
Page 60: Front Doors
1-2. Opening, closing and locking the doors Front doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (Vehicles with a smart key system) P. 37 ■ Wireless remote control P.
Page 61 1-2. Opening, closing and locking the doors ■ Door lock switch Locks all the doors Unlocks all the doors ■ Inside lock button Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 62 1-2. Opening, closing and locking the doors Locking the front doors from the outside without a key STEP Move the inside lock button to the lock position. STEP Close the door. Vehicles without a smart key system The doors cannot be locked if either of the front doors is open and the key is in the engine switch.
Page 63 1-2. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or cancelled: Function Operation Shift position linked Shifting the shift lever out of P locks all the door locking function doors. Shift position linked Shifting the shift lever to P unlocks all the door unlocking function...
Page 64 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: STEP Vehicles without a smart key system Close all the doors and turn the engine switch to the “ON” position.
Page 65 1-2. Opening, closing and locking the doors Shift the shift lever to P or N, and STEP press and hold the door lock switch ( ) for approxi- mately 5 seconds and then release. The shift lever and switch posi- tions corresponding desired function to be set are...
Page 66 Using the mechanical key (vehicles with a smart key system) The doors can also be locked and unlocked with the mechanical key. (P. 781) ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features: P. 828) CAUTION ■...
Page 67: Sliding Doors
1-2. Opening, closing and locking the doors Sliding doors Vehicles without power sliding doors The sliding doors can be opened and closed using the sliding door handle. The sliding door can be locked and unlocked using the wire- less remote control, door lock switch or inside lock knob. Vehicles with power sliding doors The power sliding doors can be opened and closed using the sliding door handle, power sliding door switches or wireless remote control.
Page 68 1-2. Opening, closing and locking the doors ■ Inside lock knobs Unlocks Locks ■ Power sliding door switches (vehicles with power sliding doors) From front seats Press and hold the switch to open and close the following door. The right side sliding door The left side sliding door Pressing holding...
Page 69 1-2. Opening, closing and locking the doors From second seats Press and hold the switch to open and close each sliding door. Pressing holding switch again while the door is operating will cause the opera- tion to reverse. However, the reverse operation cannot be performed for the first second after...
Page 70 1-2. Opening, closing and locking the doors Canceling the power sliding door system (vehicles with power sliding doors) Turn the main switch off to dis- able the power sliding door sys- tem. The sliding doors can only be opened and closed manually. The power sliding door can be opened and closed with the power sliding door switches for...
Page 71 1-2. Opening, closing and locking the doors Sliding door child-protector locks The sliding door cannot be opened by the inside door han- dle and the second seat sliding door switch when the lock is set. Unlock Lock These locks can be set to prevent children from opening the sliding doors.
Page 72 1-2. Opening, closing and locking the doors ■ Power sliding doors ● If the power sliding door outside handle is pulled while the power sliding door is opening or closing, the door will reverse the operation direction. ● During opening operation: Stroking the power sliding door handle forward will reverse the direction and start closing.
Page 73 1-2. Opening, closing and locking the doors ■ The situations in which the sliding door does not open completely The left side sliding door does not open completely when the fuel filler door is opened. ■ Jam protection function (vehicles with power sliding doors) ●...
Page 74 When the power sliding door detects an abnormality and stops opening and can not be completely closed manually, cancel the function as follows and close the door manually. After that, have the vehicle inspected and repaired by your Toyota dealer. Remove the plug from the rear edge of STEP the sliding door.
Page 75 1-2. Opening, closing and locking the doors CAUTION ■ While driving Observe the following precautions while driving. Failure to do so may cause a door to open unexpectedly and an occupant to fall out of the vehicle, resulting in death or serious injury. ●...
Page 76 1-2. Opening, closing and locking the doors CAUTION ■ Operating the sliding doors Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● When opening or closing a sliding door, thoroughly check to make sure the surrounding area is safe.
Page 77 1-2. Opening, closing and locking the doors CAUTION ● When the vehicle is stopped on a slope, the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door. ●...
Page 78 1-2. Opening, closing and locking the doors CAUTION ■ Sliding door closer (if equipped) ● In the event that the sliding door is left slightly open, the sliding door closer will automatically close it to the fully closed position. It takes several seconds before the sliding door closer begins to operate.
Page 79 1-2. Opening, closing and locking the doors CAUTION ● If the power sliding door system is turned off with the main switch while the sliding door is operating automatically, the automatic operation is stopped. The sliding door then has to be operated manually. Take extra care when on an incline, as the sliding door may open or close unexpectedly.
Page 80 1-2. Opening, closing and locking the doors CAUTION ● Do not attach any accessories other than genuine Toyota parts to the power sliding door. The power sliding door may not operate, causing itself to malfunction, or the power sliding door may close again after it is opened.
Page 81 1-2. Opening, closing and locking the doors NOTICE ■ Sliding door Make sure magazines are not bent or protruding from the sliding door pockets. Do not insert anything too big so that the shape of the sliding door pockets is dis- torted.
Page 82: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be locked and unlocked using the entry function (vehicles with a smart key system), wireless remote control or door lock switch. The back door can be opened using the back door opener. In addition, the power back door can be opened/closed using the power back door switch or wireless remote control.
Page 83 1-2. Opening, closing and locking the doors ■ Opening the back door from inside the vehicle (vehicles with power back door) Press and hold the switch to open/close the back door. Pressing switch again while the power back door is operating will cause the opera- tion to reverse.
Page 84 1-2. Opening, closing and locking the doors Back door closer (if equipped) Press the switch to close the back door. Pressing the switch again while the power back door is closing will cause it to open again. However, the reverse operation cannot be performed for the first second after automatic operation starts even if the switch is...
Page 85 1-2. Opening, closing and locking the doors ■ When closing the back door using the back door handle Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. ■...
Page 86 1-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Remove the inside panel. STEP STEP Move the lever. Vehicles without power back door Vehicles with power back door SIENNA_OM_OM45483U_(U)
Page 87 1-2. Opening, closing and locking the doors ■ The power back door can be operated when ● The shift lever is in P. ● The back door is unlocked. ■ Jam protection function (vehicles with power back door) ● If anything obstructs the power back door while it is closing or opening, the back door will automatically operate in the opposite direction.
Page 88 1-2. Opening, closing and locking the doors CAUTION ■ While driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 89 1-2. Opening, closing and locking the doors CAUTION ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 90 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. SIENNA_OM_OM45483U_(U)
Page 91 1-2. Opening, closing and locking the doors CAUTION ■ Back door closer (if equipped) ● In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. It takes several seconds before the back door closer begins to operate.
Page 92 When installing an accessory part to the back door, using a genuine Toyota part is recom- mended. SIENNA_OM_OM45483U_(U)
Page 93 1-2. Opening, closing and locking the doors CAUTION ■ Jam protection function (vehicles with power back door) Observe the following precautions. Failure to do so may cause death or serious injury. ● Although the back door stops closing when the jam protection function detects an object, take extra care as you may still be injured if part of your body is already caught.
Page 94 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other Damper stay than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 95: Adjustable Components (Seats, Mirrors, Steering Wheel)
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Lumbar support adjustment switch (driver’s side only)* *: if equipped SIENNA_OM_OM45483U_(U)
Page 96 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumbar support adjustment switch (driver’s side only) SIENNA_OM_OM45483U_(U)
Page 97 1-3. Adjustable components (seats, mirrors, steering wheel) Power easy access system (vehicles with driving position memory) When the driver enters and exits the vehicle, the driver’s seat will automatically perform the following operations: Exiting the vehicle: When all of the following actions have been performed, the seat will move backward (auto away function): •...
Page 98 1-3. Adjustable components (seats, mirrors, steering wheel) Entering vehicle: When either of the following actions has been performed, the seat will move forward (auto return function): • Vehicles without a smart key sys- tem: The engine switch has been turned to the “ACC” position. Vehicles with a smart key system: The “ENGINE START STOP”...
Page 99 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. When a locked head restraint is pushed up forcibly, the head restraint inner structure may appear. This does not indicate a problem. During rear-end collision...
Page 100: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Second seats Tip-up seat (7-passenger models) Seat position adjustment lever Seatback angle adjustment lever Tip-up seat (8-passenger models) Seat position adjustment lever Seatback angle adjustment lever SIENNA_OM_OM45483U_(U)
Page 101 1-3. Adjustable components (seats, mirrors, steering wheel) Ottoman seat Seat position adjustment lever Seatback angle adjustment lever Ottoman angle adjustment lever AUTO ACCESS SEAT Refer to “AUTO ACCESS SEAT OWNER’S MANUAL”. SIENNA_OM_OM45483U_(U)
Page 102 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Third seats Manual seat Seatback angle adjustment strap Power seat Seatback angle adjustment switch SIENNA_OM_OM45483U_(U)
Page 103 1-3. Adjustable components (seats, mirrors, steering wheel) Moving a second seat for third seat access ■ Getting in the vehicle Tip-up seats Pull the seatback angle adjust- ment lever and fold down the seatback. The cushion will tip up. The seat can slide forward. Move the seat to the frontmost position.
Page 104 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Getting out of the vehicle Tip-up seats Pull the strap and fold down the seatback. The cushion will tip up. The seat can slide forward. Move the seat to the frontmost position. Make sure that no passenger is seated on the second seat before pulling the strap.
Page 105 1-3. Adjustable components (seats, mirrors, steering wheel) Removing the second seats ■ Removing the second outside seats (Tip-up seats) Pull the armrests up. STEP Pull the seatback adjustment lever and fold down the seat- back. The cushion will tip up. STEP Slide the seat forward to a lock position.
Page 106 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Removing the second seats (Ottoman seats) Pull the armrests up. STEP Pull the seatback adjustment lever and fold down the seat- back. STEP Slide the seat to a forward lock position. Pull the release lever behind the STEP seatback straight back, then up.
Page 107 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Removing the second center seat (if equipped) Pull the lock release strap and STEP fold down the second center seatback. Make sure that the head restraint is in the lowest position. Pull the lock release strap under STEP the seat to remove the seat.
Page 108 1-3. Adjustable components (seats, mirrors, steering wheel) Installing the second seats ■ Installing the second outside seats STEP Align the marking on the seat side cover to the marking on the rail cover. Tip-up seat Align the marking on the seat front cover to the rail.
Page 109 1-3. Adjustable components (seats, mirrors, steering wheel) STEP Lower the seat and engage the latches. If you locked the seat latches unintentionally before installing securely, pull the release lever to unlock the latches. Make sure the seat is locked in place by trying to shake the seatback and lift up the seat cushion.
Page 110 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats (manual seats) ■ Before folding the third seats Fold the outside head restraints STEP and lower the center head restraint to the lowest position, and stow the seat belt buckles. ITN13N045 STEP Stow the center seat belt.
Page 111 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats (power seats) You can operate the power third seats when the shift lever is in P. ■ Before folding the third seats Lower the center head restraints STEP to the lowest position and stow the seat belt buckles.
Page 112 1-3. Adjustable components (seats, mirrors, steering wheel) Stowing the third seats (manual seats) Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts. ■ Before stowing the third seats Lower the center head restraint STEP to the lowest position, and stow the seat belt buckles.
Page 113 1-3. Adjustable components (seats, mirrors, steering wheel) Push the seat against the floor. STEP Open the flaps. ■ Before returning the third seats Be sure to move the second seats forward from the rearmost posi- tion, as they may interfere with the third seats returning operation. ■...
Page 114 1-3. Adjustable components (seats, mirrors, steering wheel) Stowing the third seats (power seats) You can operate the power third seats when the shift lever is in P. Before stowing or returning third seat, remove any items from the floor area to prevent interference with moving parts. ■...
Page 115 1-3. Adjustable components (seats, mirrors, steering wheel) Open the flaps. STEP ITN13N056 ■ Before returning the third seats Be sure to move the second seats forward from the rearmost posi- tion, as they may interfere with the third seats returning operation. ■...
Page 116 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Power third seat ● If the indicator light above the switches flashes three times when the fold- ing/returning switch is pressed, the folding operation will not start. Make sure the shift lever is in P. ●...
Page 117 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 118 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the rear seatbacks or installing seats Observe the following precautions. Failure to do so may result in death or serious injury. ● Make sure the seatback is securely locked by pushing it forward and rear- ward on the top.
Page 119 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When adjusting the seat position or the ottoman (vehicles with Otto- man seats) Make sure to leave enough space around the feet so as not to get them caught. ■ When using the ottoman (vehicles with Ottoman seats) ●...
Page 120 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE ■ Stowing the seat belt The seat belts and the buckles must be stowed before you fold down the rear seatbacks. ■ To prevent an ottoman malfunction (vehicles with Ottoman seats) ● Do not place any objects in the second passenger footwell that could pre- vent the operation of the ottoman.
Page 121: Driving Position Memory
1-3. Adjustable components (seats, mirrors, steering wheel)  Driving position memory Your preferred driving position (the position of the driver’s seat and outside rear view mirrors) can be memorized and recalled with the touch of a button. It is also possible to set this function to activate automatically when the doors are unlocked.
Page 122 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Recalling the memorized position Check that the shift lever is in P. STEP Vehicles without a smart key system Turn the engine switch to the “ON” position. Vehicles with a smart key system Turn the “ENGINE START STOP”...
Page 123 1-3. Adjustable components (seats, mirrors, steering wheel) Linking driving position memory with door unlock operation Record your driving position to button “1” or “2” before performing the following: Vehicles without a smart key system Carry only the wireless remote control to which you want to link the driving position.
Page 124 1-3. Adjustable components (seats, mirrors, steering wheel) Vehicles with a smart key system Carry only the electronic key to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position can- not be linked properly.
Page 125 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Operating the driving position memory after turning the engine off Vehicles without a smart key system Memorized positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again, even after turning the engine switch to the “LOCK”...
Page 126: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front and second outside seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Second center and third center seats Pull the head restraints up.
Page 127 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the center seat head restraints Always raise the head restraint one level from the stowed position when using.
Page 128 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Installing the head restraints (front, second and third center seats) Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
Page 129: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 130 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the seat belt shoulder anchor height (front and second outside Tip-up seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 131 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Release method The belt can be completely released when not required, such as when folding down the third seat. Insert the key or tab “A” into the STEP hole on the center seat belt buckle to release the hooked tab “B”...
Page 132 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belt pretensioners (front seats) The pretensioners help the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.
Page 133 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (P. 129) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants.
Page 134 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 135 ● If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. ■ Adjustable shoulder anchor Always make sure the shoulder belt is positioned across the center of your shoulder.
Page 136 ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 137 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When using the third center seat belt Do not use the third center seat belt with either buckle released. Fastening only one of the buckles may result in death or serious injury in case of sudden braking or a collision.
Page 138: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 139: Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 140 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them.
Page 141: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. To select a mirror to adjust, STEP press the switch. Left Right To adjust the mirror, press the STEP switch. Right Down Left SIENNA_OM_OM45483U_(U)
Page 142 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Manual type Push the mirror back in the direc- tion of the vehicle’s rear. Power type Press the switch to fold the mir- rors. Press it again to extend them to the original position.
Page 143 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 144 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. ●...
Page 145: Opening And Closing The Windows And Moon Roof Power Windows
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, operate the switch in the oppo- site direction.
Page 146 1-4. Opening and closing the windows and moon roof ■ The power windows can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 147 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 148 1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
Page 149: Quarter Windows
1-4. Opening and closing the windows and moon roof Quarter windows The quarter windows can be opened to bring in fresh outside air for additional ventilation. Manual type Pull the handle and swing the window fully out to open. Power type Opening Closing Both the left and right quarter...
Page 150 1-4. Opening and closing the windows and moon roof ■ The windows can be operated when (power type) Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 151: Moon Roof
1-4. Opening and closing the windows and moon roof  Moon roof Use the overhead switches to open and close the moon roof. ■ Front moon roof Opens the moon roof The moon roof will stop at the tilt up position once. To tilt down, press the opposite side of the switch.
Page 152 1-4. Opening and closing the windows and moon roof ■ Rear moon roof (if equipped) Opens the moon roof The moon roof stops just before it is opened fully. Press the switch again to open fully. Closes the moon roof : Lightly press either of the roof switches to stop the moon roof partway.
Page 153 1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 154 1-4. Opening and closing the windows and moon roof ■ Sunshade The sunshade can be opened and closed manually. However, both front and rear sunshades open automatically when the moon roof is opened. ■ When the moon roof does not close normally STEP Stop the vehicle.
Page 155 1-4. Opening and closing the windows and moon roof CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
Page 156: 1-5. Refueling
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: ■ Before refueling the vehicle Vehicles without a smart key system Turn the engine switch off and ensure that all the doors and win- dows are closed.
Page 157 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
Page 158 1-5. Refueling CAUTION ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 159 ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 160: Theft Deterrent System Engine Immobilizer System
1-6. Theft deterrent system  Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without a smart key system The indicator light flashes after...
Page 161 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 162 1-6. Theft deterrent system CAUTION ■ Certifications for the immobilizer system Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE ■ To ensure the system operates correctly Do not modify or remove the system.
Page 163: Alarm
1-6. Theft deterrent system  Alarm The system sounds the alarm and flashes the lights when forced entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than using the entry function (vehicles with a smart key system) or wireless remote control.
Page 164 1-6. Theft deterrent system ■ Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm: ● Unlock the doors using the entry function or wireless remote control. ● Vehicles without a smart key system: Turn the engine switch to the “ACC”...
Page 165 1-6. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations. (Stopping the alarm deactivates the alarm system.) ● The doors are unlocked using the key. ● A person inside the vehicle opens a door or hood.
Page 166 1-6. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed. SIENNA_OM_OM45483U_(U)
Page 167: Theft Prevention Labels (For U.s.a.)
1-6. Theft deterrent system Theft prevention labels (for U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law. SIENNA_OM_OM45483U_(U)
Page 168: Safety Information Correct Driving Posture
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (P. 95) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 169 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 170: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SIENNA_OM_OM45483U_(U)
Page 171 1-7. Safety information SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas- senger from impact with interior components. SRS driver knee airbag Can help provide driver protection. SRS side and curtain shield airbags SRS side airbags Can help protect the torsos of the front seat occupants.
Page 172 1-7. Safety information Airbag system components Front passenger airbag Side impact sensors (front door) Curtain shield airbags Driver’s seat belt buckle Side airbags switch Front passenger occupant Driver’s seat position sen- classification system (ECU and sensors) Driver’s knee airbag Side impact sensors (rear) Front impact sensors Front passenger’s seat belt buckle switch...
Page 173 1-7. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 174 1-7. Safety information ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars, and roof side rail, may be hot for several minutes.
Page 175 1-7. Safety information ■ SRS airbag deployment conditions (SRS front airbags) ● The SRS front airbag will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 176 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and curtain shield airbags may also deploy if a seri- ous impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 177 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 178 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or...
Page 179 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
Page 180 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 181 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 182 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy.
Page 183 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not place anything, such as a cushion, on the front passenger’s seat.
Page 184 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 185: Front Passenger Occupant Classification System
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 186 1-7. Safety information Conditions and operation of the front passenger occupant classification system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights ON” Indicator/ SRS warning light warning light Front passenger’s seat belt reminder Flashing light Front passenger airbag Side airbag on the front passenger seat Devices...
Page 187 1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” indicator lights illuminated Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Activated Curtain shield airbag in the front passenger side Front passenger’s seat belt pretensioner...
Page 188 1-7. Safety information : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec- ognize him/her as a child depending on his/her physique and pos- ture.
Page 189 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 190 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 191: Child Restraint Systems
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of U.S.A. and Canada now require the use of child restraint systems.
Page 192 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child: Rear facing  Infant seat/convertible seat Forward facing  Convertible seat Booster seat SIENNA_OM_OM45483U_(U)
Page 193 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 194 1-7. Safety information CAUTION ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or an accident.
Page 195 1-7. Safety information CAUTION ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death.
Page 196: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 197 1-7. Safety information Third seats Child restraint LATCH anchors LATCH anchors are provided for center seat. (Buttons dis- playing the location of the anchors are attached to the seats.) ■ Using the seat belts Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except driver’s seat belt) (P.
Page 198 1-7. Safety information Second seats (8-passenger models) Anchor brackets are provided for second outside seats. Second seats (7-passenger models) Anchor brackets are provided for both second seats. Third seats An anchor bracket is provided for center seat. SIENNA_OM_OM45483U_(U)
Page 199 1-7. Safety information Installation with LATCH system (second seat) Fold the seatback while pulling STEP the lever and move to the rear- most recline position. STEP Widen the gap between the seat cushion and seatback slightly. Type A Latch the buckles onto the STEP LATCH anchors.
Page 200 1-7. Safety information Type B Latch the hooks of the lower STEP straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 201 1-7. Safety information Installation with LATCH system (third seat) Manual seat 1st lock position STEP 11th lock position Fold the seatback while pulling the strap. Return the seatback and secure it at the 1st lock posi- tion (most upright position). Adjust the seatback to the 11th lock position.
Page 202 1-7. Safety information Type A Latch the buckles onto the STEP LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 203 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing Infant seat/convertible seat ■ Place the child restraint system STEP on the rear seat facing the rear of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle.
Page 204 1-7. Safety information While pushing the child restraint STEP system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 205 1-7. Safety information Fully extend the shoulder belt STEP and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended. While pushing the child restraint STEP system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place.
Page 206 1-7. Safety information ■ Booster seat Place the child restraint system STEP on the seat facing the front of the vehicle. Sit the child in the child restraint STEP system. Fit the seat belt to the child restraint system according to the manufacturer’s instruc- tions and insert the plate into the buckle.
Page 207 1-7. Safety information Child restraint systems with a top tether strap (second seat) Secure the child restraint system STEP using the seat belt or LATCH anchors, and adjust the head restraint to the uppermost posi- tion. : Ottoman seat only Latch the hook onto the anchor STEP bracket and tighten the top tether...
Page 208 1-7. Safety information Child restraint systems with a top tether strap (third seat) Secure the child restraint system STEP using the seat belt or LATCH anchors. Adjust head restraint to the uppermost posi- tion. Latch the hook onto the anchor STEP bracket and tighten the top tether strap.
Page 209 1-7. Safety information CAUTION ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only which could cause injury or discomfort to the child. (P. 132) ■...
Page 210 1-7. Safety information CAUTION ■ When installing a child restraint system ● When installing a child restraint system on the third center seat, adjust both seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in the event of sudden braking, sudden swerving or an accident.
Page 211 1-7. Safety information CAUTION ■ When installing a child restraint system to the AUTO ACCESS SEAT (if equipped) ● Do not operate the AUTO ACCESS SEAT while a child restraint system is fixed to the seat by the child restraint lock function belt.
Page 212 1-7. Safety information SIENNA_OM_OM45483U_(U)
Page 213: When Driving
When driving 2-1. Driving procedures 2-4. Using other driving systems Driving the vehicle.... 214 Cruise control....297 Engine (ignition) switch Dynamic radar cruise (vehicles without a smart control ......302 key system)....228 Intuitive parking assist..318 Engine (ignition) switch Rear view monitor (vehicles with a smart system ......
Page 214: 2-1. Driving Procedures
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing: ■ Starting the engine P. 228, 231 ■ Driving STEP With the brake pedal depressed, shift the shift lever to D. (P. 238) STEP Release the parking brake.
Page 215 2-1. Driving procedures ■ Parking the vehicle STEP With the shift lever in D, depress the brake pedal. STEP Set the parking brake. (P. 244) STEP Shift the shift lever to P. (P. 238) If parking on a hill, block the wheels as needed. STEP Vehicles without a smart key system: Turn the engine switch to the “LOCK”...
Page 216 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down operation.
Page 217 2-1. Driving procedures ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (P. 800) ■ Eco-friendly driving During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on.
Page 218 2-1. Driving procedures CAUTION ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine run- ning. This prevents the vehicle from creeping. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
Page 219 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. ●...
Page 220 2-1. Driving procedures CAUTION ■ When driving the vehicle ● Use engine braking (downshift) to maintain a safe speed when driving down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose effectiveness. (P. 239) ●...
Page 221 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage can result if the pads are not replaced when needed.
Page 222 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than P or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident. ● Do not leave the vehicle with the engine running for a long time. If such a situation cannot be avoided, park the vehicle in an open space and check that exhaust fumes do not enter the vehicle interior.
Page 223 2-1. Driving procedures CAUTION ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: • Gas may leak from a cigarette lighter or spray can, and may lead to a fire.
Page 224 The exhaust system should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 225 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly venti- lated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 226 2-1. Driving procedures NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. ● Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill.
Page 227 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 228: Engine (Ignition) Switch (Vehicles Without A Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles without a smart key system) ■ Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 229 2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” STEP Shift the shift lever to P. Push in the key and turn it to the “LOCK” STEP position. ■ If the engine does not start (vehicles with engine immobilizer system) The engine immobilizer system may not have been deactivated.
Page 230 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 231: Engine (Ignition) Switch (Vehicles With A Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in P.
Page 232 2-1. Driving procedures ■ Stopping the engine STEP Stop the vehicle. STEP Shift the shift lever to P. STEP Set the parking brake. (P. 244) STEP Press the “ENGINE START STOP” switch. STEP Release the brake pedal and check that the indicator on the “ENGINE START STOP”...
Page 233 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch modes Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) Emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can...
Page 234 2-1. Driving procedures When stopping the engine with the shift lever in a position other than P If the engine is stopped with the shift lever in a position other than P, the “ENGINE START STOP” switch will not be turned off but instead be turned to ACCESSORY mode.
Page 235 2-1. Driving procedures ■ Electronic key battery depletion P. 50 ■ Conditions affecting operation P. 46 ■ Note for the entry function P. 47 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 160) ■...
Page 236 2-1. Driving procedures ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted P. 708 CAUTION ■...
Page 237 Symptoms indicating a malfunction with the “ENGINE START STOP” switch If the “ENGINE START STOP” seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Contact your Toyota dealer immediately. SIENNA_OM_OM45483U_(U)
Page 238: Automatic Transaxle
2-1. Driving procedures Automatic transaxle Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. Vehicles with a smart key system: While the “ENGINE START STOP”...
Page 239 2-1. Driving procedures ■ Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral Normal driving S mode driving (P. 240) : Shifting to the D position allows the system to select a gear suitable for the driving conditions. Setting the shift lever to the D position is recommended for normal driving.
Page 240 2-1. Driving procedures Changing shift ranges in S mode When the shift lever is in the S position, the shift lever can be oper- ated as follows: Upshifting Downshifting The initial shift range in S mode is set automatically to 5 or 4 accord- ing to vehicle speed.
Page 241 2-1. Driving procedures ■ Shift ranges and their functions ● Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions. But, the gear is limited according to selected shift range. ● You can choose from 6 levels of engine braking force. ●...
Page 242 S This may indicate a malfunction in the automatic transaxle system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transaxle will operate in the same manner as when the shift lever is in D.) ■...
Page 243: Turn Signal Lever
2-1. Driving procedures Turn signal lever The turn signal lever can be used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signal will flash until you release the lever.
Page 244: Parking Brake
2-1. Driving procedures Parking brake To set the parking brake, fully depress the parking brake pedal with your left foot while U.S.A. Canada depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.) ■ Usage in winter time See “Winter driving tips”...
Page 245: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P.
Page 246: Instrument Cluster And Information Display Gauges And Meters
2-2. Instrument cluster and information display Gauges and meters Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Engine coolant temperature gauge Displays the engine coolant temperature. Odometer and trip meter display Odometer: Displays the total distance the vehicle has been driven.
Page 247 2-2. Instrument cluster and information display Changing the display Pressing this button switches among odometer display, trip meter dis- plays and Eco Driving Indicator Light setting screen. Odometer Trip meter A Trip meter B Eco Driving Indicator Light setting screen : Pressing and holding the but- ton will reset the trip meter.
Page 248 2-2. Instrument cluster and information display ■ The meters and display illuminate when (Optitron type meters) Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode. NOTICE ■...
Page 249: Indicators And Warning Lights
2-2. Instrument cluster and information display Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. ■ Instrument cluster ■ Center display SIENNA_OM_OM45483U_(U)
Page 250 2-2. Instrument cluster and information display ■ Outside rear view mirrors (if equipped) SIENNA_OM_OM45483U_(U)
Page 251 2-2. Instrument cluster and information display ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Cruise control indicator (P. 243) (P. 297, 302) (if equipped) Cruise control “SET” Headlight high beam indicator indicator (P.
Page 252 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate that the system is operating.
Page 253 If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction with the system. If this occurs, have the vehicle inspected by your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 254 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details. : The light flashes to indicate a malfunction.
Page 255 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 256: Multi-Information Display
2-2. Instrument cluster and information display  Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the clock and current outside temper- ature. The display varies depending on its specification. ● Clock (P. 259) Indicates and sets the time.
Page 257 2-2. Instrument cluster and information display ● Warning messages (P. 758) Automatically displayed when a malfunction occurs in one of the vehi- cle’s systems. ● Customizable features setting display (P. 833) Switching the display “INFO” button “SELECT RESET” button “SETUP” button Display items Display items can be switched by pressing the “INFO”...
Page 258 2-2. Instrument cluster and information display ■ Current Fuel Economy Displays the current rate of fuel consumption. ■ Distance to Empty Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. • This distance is computed based on your average fuel consumption.
Page 259 2-2. Instrument cluster and information display ■ Trip Timer Displays the elapsed time since the timer was reset. The timer only functions when the engine is running. The timer can be started and paused by pressing the “SELECT RESET” button, and reset by pressing and holding the “SELECT RESET”...
Page 260 2-2. Instrument cluster and information display Select the desired item by press- STEP ing the “INFO” or “SETUP” but- ton. Press the “SELECT RESET” but- ton to enter the setting mode. The current setting is indicated by yellow text. ■ Setting the clock STEP Select “Clock”...
Page 261 2-2. Instrument cluster and information display ■ Selecting the language STEP Select “Language” on the “Display Settings” screen, and press the “SELECT RESET” button. Select the language you want to STEP read by pressing the “INFO” or “SETUP” button. Press the “SELECT RESET” but- ton to set the language.
Page 262 2-2. Instrument cluster and information display ● Setting the brightness Select “Brightness” STEP “Screen Settings” screen, and press the “SELECT RESET” but- ton. Press the “INFO” or “SETUP” STEP button to adjust the brightness. +: Brighter -: Darker Press the “SELECT RESET” but- ton to exit the screen.
Page 263 2-2. Instrument cluster and information display ● Setting the contrast Select “Contrast” on the “Screen STEP Settings” screen, and press the “SELECT RESET” button. Press the “INFO” or “SETUP” STEP button to adjust the contrast. +: Strengthen -: Weaken Press the “SELECT RESET” but- ton to exit the screen.
Page 264 2-2. Instrument cluster and information display ● Setting the brightness Select “Brightness” STEP “Screen Settings” screen, and press the “SELECT RESET” but- ton. Press the “INFO” or “SETUP” STEP button to adjust the brightness. +: Brighter -: Darker Press the “SELECT RESET” but- ton to the exit screen.
Page 265 2-2. Instrument cluster and information display Press the “INFO” or “SETUP” STEP button to adjust the contrast. +: Strengthen -: Weaken Press the “SELECT RESET” but- ton to exit the screen. ● Setting the color Select “Color” on the “Screen STEP Settings”...
Page 266 2-2. Instrument cluster and information display ● Setting the tone Select “Tone” on the “Screen STEP Settings” screen, and press the “SELECT RESET” button. Press the “INFO” or “SETUP” STEP button to adjust the tone. +: Brighter -: Darker Press the “SELECT RESET” but- ton to exit the screen.
Page 267 2-2. Instrument cluster and information display ■ If the vehicle is moved while settings are being changed on the multi- information display If the vehicle speed exceeds approxi- mately 3 mph (5 km/h) while the settings are being changed, “Please Stop Vehicle to Change Settings”...
Page 268 2-2. Instrument cluster and information display ■ Eco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on. Eco Driving Indicator Zone Display Suggests Zone of Eco driving with cur- rent Eco driving ratio based on accel- eration.
Page 269 ■ When “--”, “E” or “F” is displayed on the outside temperature display The system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Outside temperature display In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change.
Page 270: 2-3. Operating The Lights And Wipers
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: The illustration is intended as an example. Type A The side marker, park- ing, tail, license plate, daytime running lights equipped)
Page 271 2-3. Operating the lights and wipers Off. (if equipped) Vehicles with the day- time running light sys- tem: daytime running light system is Off. (if equipped) Vehicles with the day- time running light sys- tem: daytime running light system is SIENNA_OM_OM45483U_(U)
Page 272 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. When the light switch is in position, Automatic High Beam system will be activated. (P.
Page 273 2-3. Operating the lights and wipers Manual headlight leveling dial (vehicles with discharge headlights) The level of the headlight aim can be adjusted according to the num- ber of passengers and the loading condition of the vehicle. Raises the level of the head- lights Lowers the level of the head- lights...
Page 274 2-3. Operating the lights and wipers ■ Daytime running light system (if equipped) ● To make your vehicle more visible to other drivers, the headlights turn on automatically (at a reduced intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night.
Page 275 2-3. Operating the lights and wipers ■ Automatic light off system Vehicles without a smart key system ● When the headlights are on: The headlights and tail lights turn off 30 sec- onds after a door is opened and closed if the engine switch is turned to the “ACC”...
Page 276 2-3. Operating the lights and wipers ■ Customization that can be configured at Toyota dealer or by the multi- information display Settings (e.g. light sensor sensitivity) can be changed. (Customizable features: P. 828) NOTICE ■ To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not run- ning.
Page 277: Automatic High Beam
2-3. Operating the lights and wipers  Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary.
Page 278 2-3. Operating the lights and wipers ■ Turning the high beam on/off manually Switching to low beam Pull the lever to the original position. Switching to high beam Turn the light switch to the position. SIENNA_OM_OM45483U_(U)
Page 279 2-3. Operating the lights and wipers ■ High beam automatic turning on or off conditions When all of the following conditions are fulfilled, high beam will be automatically turned on (after approximately 1 second): ● Vehicle speed is above approximately 20 mph (32 km/h). ●...
Page 280 2-3. Operating the lights and wipers ■ Limitations of the Automatic High Beam Do not rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turning high beam on or off manually if nec- essary.
Page 281 2-3. Operating the lights and wipers ● In the situations below, the system may not be able to correctly detect the surrounding brightness levels, and may flash or expose nearby pedestri- ans to the high beam. Therefore, you should consider turning the high beam on or off manually rather than relying on the Automatic High Beam system.
Page 282 2-3. Operating the lights and wipers ■ If the Automatic High Beam indicator flashes... It may indicate a malfunction in the system. Contact your Toyota dealer. ■ Customization that can be configured at Toyota dealer or by the multi- information display The Automatic High Beam can be turned off.
Page 283 Do not overload the vehicle. ● Do not modify the vehicle. ● Do not replace windshield with a non-genuine windshield. Contact your Toyota dealer. ■ Headlight leveling When the vehicle is loaded, headlight level should be adjusted to appropri- ate dial setting. (P. 273)
Page 284: Fog Light Switch
2-3. Operating the lights and wipers  Fog light switch The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Type A Turns the front fog lights off Turns the front fog lights on ...
Page 285 2-3. Operating the lights and wipers Type B Turns the front fog lights off Turns the front fog lights on ■ Fog lights can be used when The headlights are on in low beam. SIENNA_OM_OM45483U_(U)
Page 286: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Intermittent windshield wipers with interval adjuster The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted. Type A Intermittent wind-...
Page 287 2-3. Operating the lights and wipers Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. Type B Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation...
Page 288 2-3. Operating the lights and wipers Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. SIENNA_OM_OM45483U_(U)
Page 289 2-3. Operating the lights and wipers Rain-sensing windshield wipers (if equipped) When “AUTO” is selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume. When “AUTO” is selected, the sensor sensitivity can be adjusted as follows by turning the switch ring: Type A Rain-sensing wiper...
Page 290 2-3. Operating the lights and wipers Increases the sensitivity Decreases the sensitivity Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. Type B Rain-sensing wiper operation (“AUTO”) speed wiper operation High speed wiper operation Temporary operation SIENNA_OM_OM45483U_(U)
Page 291 2-3. Operating the lights and wipers Increases the sensitivity Decreases the sensitivity Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. SIENNA_OM_OM45483U_(U)
Page 292 2-3. Operating the lights and wipers ■ The windshield wipers and washer can be operated when Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 293 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. SIENNA_OM_OM45483U_(U)
Page 294: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer The wiper operation is selected by moving the lever as follows: Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation SIENNA_OM_OM45483U_(U)
Page 295 2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation ■ The rear window wiper and washer can be operated when Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP”...
Page 296 2-3. Operating the lights and wipers NOTICE ■ When the rear window is dry Do not use the wiper, as it may damage the rear window. ■ When the washer fluid tank is empty Do not operate the switch continually as the washer fluid pump may over- heat.
Page 297: Using Other Driving Systems Cruise Control
2-4. Using other driving systems  Cruise control Use cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed STEP Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come on.
Page 298 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 299 2-4. Using other driving systems ■ Canceling and resuming the constant speed control Pulling the lever toward you cancels the constant speed control. The speed setting is also can- celed when the brakes are applied. Pushing lever resumes constant speed control. Resuming is available when the vehicle speed is more than approximately 25 mph...
Page 300 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 301 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 302: Dynamic Radar Cruise Control
2-4. Using other driving systems  Dynamic radar cruise control Dynamic radar cruise control supplements conventional cruise con- trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehi- cles ahead.
Page 303 2-4. Using other driving systems ■ Setting the vehicle speed (vehicle-to-vehicle distance con- trol mode) Press the “ON-OFF” button to STEP activate the cruise control. Dynamic radar cruise control indicator will come on. Press the button again to deactivate the cruise control. Accelerate or decelerate to STEP the desired speed and push...
Page 304 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 305 2-4. Using other driving systems ■ Changing the vehicle-to-vehicle distance Pressing the button changes vehicle-to-vehicle dis- Preceding tance as follows: vehicle mark Long Medium Short Vehicles without a smart key system: The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON”...
Page 306 2-4. Using other driving systems ■ Vehicle-to-vehicle distance settings Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 50 mph (80 km/h). Vehi- cle-to-vehicle distance increases/decreases in accordance with vehicle speed. Distance options Vehicle-to-vehicle distance Long...
Page 307 2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 308 2-4. Using other driving systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver.
Page 309 2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Page 310 2-4. Using other driving systems Vehicles without a smart key sys- tem: If the engine switch is turned off and then turned to the “ON” posi- tion again, the vehicle will auto- matically return to vehicle-to- vehicle distance control mode. Vehicles with a smart key system: If the “ENGINE START STOP”...
Page 311 “AUTO” mode or the high speed wiper operation posi- tion). If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 312 2-4. Using other driving systems ■ Automatic cancelation of constant speed control The cruise control will stop maintaining the vehicle speed in the following sit- uations. ● Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set vehicle speed. At this time, the memorized set speed is not retained.
Page 313 2-4. Using other driving systems ■ Certification U.S.A. FCC ID: HYQDNMWR005 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 314 2-4. Using other driving systems CAUTION ■ Before using dynamic radar cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes, etc.
Page 315 2-4. Using other driving systems CAUTION ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 316 2-4. Using other driving systems CAUTION ■ When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary when any of the following types of vehicles are in front of you. As the sensor may not be able to correctly detect these types of vehicles, the approach warning (P.
Page 317 If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by a Toyota dealer. ● Do not disassemble the sensor.
Page 318: Intuitive Parking Assist
2-4. Using other driving systems  Intuitive parking assist The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display, the touch screen and a buzzer. Always check the surrounding area when using this system.
Page 319 2-4. Using other driving systems Display When the sensors detect an obstacle, a graphic is shown on the multi information display or touch screen depending on the position and distance to the obstacle. Multi-information display Touch screen (with navigation system) : Depending on the type of navigation system.
Page 320 2-4. Using other driving systems The distance display and buzzer When a sensor detects an obstacle, the direction of and the approxi- mate distance to the obstacle are displayed and the buzzer sounds. ■ Corner sensor operation and distance to an obstacle The system operates when the vehicle approaches within the fol- lowing distances to an obstacle.
Page 321 2-4. Using other driving systems ■ Back sensor operation and distance to an obstacle The system operates when the vehicle approaches within the fol- lowing distances to an obstacle. The indicator flashes and the buzzer sounds when the system is operating. Approximate distance to obstacle Indicator and buzzer / Color 5.9 to 2.8 ft.
Page 322 2-4. Using other driving systems Detection range of the sensors Approximately 2.0 ft. (60 cm) Approximately 2.8 ft. (85 cm) Approximately 5.9 ft. (180 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obsta- cles that are extremely close to the vehicle.
Page 323 2-4. Using other driving systems ■ Sensor detection information ● Certain vehicle conditions and the surrounding environment may affect the ability of the sensor to correctly detect obstacles. Particular instances where this may occur are listed below. • There is dirt, snow or ice on the sensor. •...
Page 324 Certification (Canada only) This ISM device complies with Canadian ICES-001. ■ When there is a malfunction In the following cases, have the vehicle inspected by your Toyota dealer. ● If the bumper is damaged. ● If the intuitive parking assist indicator light remains on without a beep sounds.
Page 325: Rear View Monitor System
2-4. Using other driving systems  Rear view monitor system The rear view monitor system assists the driver by displaying an image of the area behind the vehicle while reversing. The image is displayed in reverse on the screen. This reversed image is a similar image to the one on the inside rear view mirror.
Page 326 2-4. Using other driving systems ■ Displayed area The area covered by the camera is lim- ited. Objects that are close to either cor- ner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary depending on vehicle orientation or road conditions.
Page 327 2-4. Using other driving systems ■ Rear view monitor system camera In the following cases, it may be difficult to see the images on the screen, even when the system is functioning correctly. • The vehicle is in a dark area, such as at night.
Page 328 2-4. Using other driving systems ■ Driving precautions When the grade behind the vehicle slopes up sharply, objects appear to be farther away than they actually are. When the grade behind the vehicle slopes down sharply, objects appear to be closer than they actually are. SIENNA_OM_OM45483U_(U)
Page 329 2-4. Using other driving systems When any part of the vehicle sags due to the number of passengers or the distribu- tion of the load, there is a margin of error between the guide lines on the screen and the actual distance/course on the road.
Page 330 Conditions which may affect the rear view monitor system ● If the back of the vehicle has been hit, the camera’s position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. ● Rapid temperature changes, such as when hot water is poured on the vehicle in cold weather, may cause the system to function abnormally.
Page 331: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 332 2-4. Using other driving systems ■ Active Torque Control 4WD (AWD models only) Automatically switches from front-wheel drive to AWD (All-Wheel Drive) according to driving conditions, helping to ensure reliable handling and stability. Examples of conditions where the system will switch to AWD are when cornering, going uphill, starting off or accelerating, and when the road surface is slippery due to snow or rain etc.
Page 333 2-4. Using other driving systems Disabling TRAC and VSC system If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. ■...
Page 334 When the “TRAC OFF” indicator light comes on even if the VSC OFF switch has not been pressed TRAC and hill-start assist control (if equipped) cannot be operated. Contact your Toyota dealer. ■ Sounds and vibrations caused by ABS, brake assist, Enhanced VSC and TRAC ●...
Page 335: Tires
2-4. Using other driving systems ■ Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine off.
Page 336: Tires
The ABS and Enhanced VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 337: Hill-Start Assist Control
2-4. Using other driving systems  Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on an incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
Page 338 • The brake pedal is depressed again. • The brake pedal has been depressed for more than approximately 3 minutes. ■ If the slip indicator comes on... It may indicate a malfunction in the system. Contact your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 339 2-4. Using other driving systems CAUTION ■ Hill-start assist control ● Do not overly rely on hill-start assist control. Hill-start assist control may not operate effectively on extremely steep inclines or roads covered in ice. ● Unlike the parking brake, hill-start assist control is not intended to hold the vehicle stationary for an extended period of time.
Page 340: Pcs (Pre-Collision System)
2-4. Using other driving systems  PCS (Pre-Collision System) When the radar sensor detects possibility of a frontal collision, the pre-collision system such as the brakes and seat belts are auto- matically engaged to lessen impact as well as vehicle damage. ■...
Page 341 2-4. Using other driving systems Disabling pre-collision braking Pre-collision braking disabled Pre-collision braking enabled The “PCS” warning light will turn on when pre-collision braking is disabled. Radar sensor The radar sensor detects vehi- cles or other obstacles on or near the road ahead and deter- mines whether a collision is imminent based on the position, speed, and heading of the obsta-...
Page 342 2-4. Using other driving systems ■ The pre-collision system is operational when ● Pre-collision seat belts (type A): • Vehicle speed is greater than about 4 mph (5 km/h). • The speed at which your vehicle is approaching the obstacle or the vehicle running ahead of you is greater than about 19 mph (30 km/h).
Page 343 2-4. Using other driving systems ■ Conditions that may trigger the system even if there is no possibility of a collision ● When there is an object by the roadside at the entrance to a curve ● When passing an oncoming vehicle on a curve ●...
Page 344 2-4. Using other driving systems ■ Situations in which the pre-collision system does not function properly The system may not function effectively in situations such as the following: ● On roads with sharp bends or uneven surfaces ● If a vehicle suddenly moves in front of your vehicle, such as at an inter- section ●...
Page 345 2-4. Using other driving systems ■ Certification U.S.A. FCC ID: HYQDNMWR005 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 346 2-4. Using other driving systems CAUTION ■ Limitations of the pre-collision system Do not overly rely on the pre-collision system. Always drive safely, taking care to observe your surroundings and checking for any obstacles or other road hazards. Failure to do so may cause an accident resulting in death or serious injury.
Page 347 2-4. Using other driving systems CAUTION ■ When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary in any of the following situations. ● When water or snow thrown up by the surrounding vehicles hinders the functioning of the sensor ●...
Page 348: Bsm (Blind Spot Monitor)
2-4. Using other driving systems  BSM (Blind Spot Monitor) The Blind Spot Monitor is a system that has 2 functions; ● The Blind Spot Monitor function Assists the driver in making the decision when changing lanes ● The Rear Cross Traffic Alert function Assists the driver when backing up These functions use same sensors.
Page 349 2-4. Using other driving systems BSM main switch Pressing the switch turns the system on or off. When the switch is set to on, the switch’s indicator illuminates. Common switch for Blind Spot Monitor function and Rear Cross Traffic Alert function. Outside rear view mirror indicator Blind Spot Monitor function: When a vehicle is detected in the blind spot, the outside rear view mir-...
Page 350 2-4. Using other driving systems The Blind Spot Monitor function The Blind Spot Monitor function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehicles existence via the outside rear view mirror indicator.
Page 351 2-4. Using other driving systems The Rear Cross Traffic Alert function The Rear Cross Traffic Alert Functions when your vehicle is in reverse. It can detect other vehicles approaching from the right or left rear of the vehicle. It uses radar sensors to alert the driver of the other vehicle’s existence through flashing the outside rear view mirror indicators and sounding a buzzer.
Page 352 2-4. Using other driving systems The Rear Cross Traffic Alert function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle...
Page 353 2-4. Using other driving systems ■ The Blind Spot Monitor function is operational when ● The BSM main switch is set to on ● Vehicle speed is greater than approximately 10 mph (16 km/h). ■ The Blind Spot Monitor function will detect a vehicle when ●...
Page 354 2-4. Using other driving systems ■ Conditions under which the Blind Spot Monitor function may not func- tion correctly ● The Blind Spot Monitor function may not detect vehicles correctly in the following conditions: • During bad weather such as heavy rain, fog, snow etc. •...
Page 355 2-4. Using other driving systems ■ The Rear Cross Traffic Alert function is operational when ● The BSM main switch is set to on. ● The shift lever is in R. ● Vehicle speed is less than approximately 5 mph (8 km/h). ●...
Page 356 2-4. Using other driving systems ■ Conditions under which the Rear Cross Traffic Alert function may not function correctly The Rear Cross Traffic Alert function may not detect vehicles correctly in the following conditions: ● When ice or mud etc. is attached to the rear bumper ●...
Page 357 2-4. Using other driving systems ■ The outside rear view mirror indicators visibility When under strong sunlight, the outside rear view mirror indicator may be difficult to see. ■ When there is a malfunction in the Blind Spot Monitor system If a system malfunction is detected due to any of the following reasons, warning lights will turn on: (P.
Page 358 2-4. Using other driving systems CAUTION ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. ● The Blind Spot Monitor function is a supplementary function which alerts the driver that a vehicle is present in the blind spot.
Page 359 If the sensor moves even slightly off position, the system may mal- function and vehicles that enter the detection area may not be detected. If the sensor or surrounding area is subject to a strong impact, always have the area inspected by your Toyota dealer. ● Do not disassemble the sensor.
Page 360: 2-5. Driving Information
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ●...
Page 361 2-5. Driving information Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit  (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.”...
Page 362 2-5. Driving information Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (P. 798) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
Page 363 2-5. Driving information Roof luggage carrier (if equipped) ■ Roof luggage carrier components Roof rails Cross rails ■ Adjusting the position of cross rails Turn the knobs counterclockwise to release the cross rails. Slide the cross rails to the appro- priate position for loading lug- gage turn...
Page 364 2-5. Driving information Seating configuration variation Cargo capacity Weight of the removed second seat If removing the second seats, it is possible to load extra cargo equal to the weight of the removed seats. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) + (Weight of the removed second seats) Second seats weight: 7-passenger models...
Page 365 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury.
Page 366 2-5. Driving information CAUTION ■ Storage precautions ● Secure all items in the occupant compartment, as they may shift and injure someone during sudden braking, sudden swerving or an acci- dent. ● When you fold down the rear seats, long items should not be placed directly behind the front seats.
Page 367 2-5. Driving information CAUTION ■ When loading cargo Observe the following precautions: ● Place the cargo so that its weight is distributed evenly between the front and rear axles. ● If loading long or wide cargo, never exceed the vehicle overall length or width.
Page 368: Vehicle Load Limits
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. Total load capacity (vehicle capacity weight): P. 798 ■ Total load capacity means the combined weight of occupants, cargo and luggage.
Page 369: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 370 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake.
Page 371: Tires
2-5. Driving information ■ Tire chain installation Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install tire chains on the rear tires.
Page 372: Tires
NOTICE ■ Repairing or replacing snow tires Request repairs of or replacement of snow tires from Toyota dealers or legit- imate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 373: Trailer Towing (With Towing Package)
To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating condi- tions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc.
Page 374 2-5. Driving information Towing related terms ■ GCWR (Gross Combination Weight Rating) The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (including the cargo in the trailer).
Page 375 2-5. Driving information ■ GAWR (Gross Axle Weight Rating) The maximum allowable gross Front GAWR axle weight. The gross axle weight is the load placed on each axle (front and rear). Rear GAWR ■ TWR (Trailer Weight Rating) The maximum allowable gross (With brakes) trailer weight.
Page 376 2-5. Driving information ■ Unbraked TWR (Unbraked Trailer Weight Rating) The trailer weight rating for tow- (Without brakes) ing a trailer without a trailer ser- vice brake system. ■ Tongue Weight The load placed on the trailer hitch ball. (P. 379) SIENNA_OM_OM45483U_(U)
Page 377 ● If the gross trailer weight is over 2000 lbs. (907 kg), a sway control device with sufficient capacity is required.  : The towing package is required. Toyota does not recommend towing with this vehicle without the towing package. SIENNA_OM_OM45483U_(U)
Page 378 Unbraked TWR 1000 lb. (454 kg)  : These models meet the tow-vehicle trailering requirement of SAE Interna- tional per SAE J2807. The towing package is required. Toyota does not recommend towing with this vehicle without the towing package. SIENNA_OM_OM45483U_(U)
Page 379 2-5. Driving information Trailer Tongue Weight ● A recommended tongue weight varies in accordance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. •...
Page 380 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 381 2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size.
Page 382 2-5. Driving information Positions for towing hitch receiver Hitch receiver pin hole posi- tion: 37.3 in. (949.8 mm) Connecting trailer lights Please consult your dealer when installing trailer lights, as incorrect installation may cause damage to the vehicle’s lights. Please take care to comply with your state’s laws when installing trailer lights.
Page 383: Tires
● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 384 2-5. Driving information ● Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to the right.
Page 385 2-5. Driving information ● Take care when passing other vehicles. Passing requires consider- able distance. After passing a vehicle, do not forget the length of your trailer, and be sure you have plenty of room before changing lanes. ● To maintain engine braking efficiency and charging system perfor- mance when using engine braking, do not put the transmission in D.
Page 386 2-5. Driving information ● Always place wheel blocks under both the vehicle’s and the trailer’s wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoid- able, do so only after performing the following: STEP Apply the brakes and keep them applied.
Page 387: Tires
2-5. Driving information ■ Matching trailer ball height to trailer coupler height No matter which class of tow hitch applies, for a safe trailer hookup, the trailer ball setup on must be proper height for the coupler on the trailer. Coupler Trailer ball ■...
Page 388 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 389: Tires
2-5. Driving information ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 390 2-5. Driving information CAUTION ■ Trailer towing precautions To tow a trailer safely, use extreme care and drive the vehicle in accordance with the trailer’s characteristics and operating conditions. Failure to do so could cause an accident resulting in death or serious injury. Vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch.
Page 391 2-5. Driving information CAUTION ■ To avoid accident or injury ● Do not use cruise control when towing. ● Slow down and downshift before descending steep or long downhill grades. Do not make sudden downshifts while descending steep or long downhill grades.
Page 392 NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights.
Page 393: Dinghy Towing
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
Page 394 ® 3-1. Using the air conditioning 3-3. Using the Bluetooth audio system and defogger system ® Front manual air Bluetooth conditioning system ..396 audio system....486 ® Front automatic air Using the Bluetooth conditioning system ..404 audio system....490 ®...
Page 395: Interior Features
Interior features 3-5. Using the hands-free phone 3-7. Using the storage features system (for cellular phone) List of storage features ..588 • Glove boxes ....589 Hands-free phone system • Console box ....591 (for cellular phone) • Overhead console..594 features......
Page 396: 3-1. Using The Air Conditioning System And Defogger
3-1. Using the air conditioning system and defogger  Front manual air conditioning system Driver’s side temperature control dial Front fan speed Air outlet selector Rear temperature control dial buttons Passenger’s side temperature control dial Front air Windshield defogger conditioning on/off switch Rear fan speed Outside air or recirculated air mode...
Page 397 3-1. Using the air conditioning system and defogger STEP Driver’s side temperature control dial Turn the temperature control dial clockwise (warm) or coun- terclockwise (cool). is not pressed, the system will blow ambient temperature air or heated air. For quick cooling, turn the temperature control dial to the “MAX A/C” position.
Page 398 3-1. Using the air conditioning system and defogger STEP To change the air outlets, press Air flows as shown below according to the mode selected. Air flows to the upper body. Air flows to the upper body and feet. Air flows mainly to the feet. SIENNA_OM_OM45483U_(U)
Page 399 3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (introduces air from out- side the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed.
Page 400 3-1. Using the air conditioning system and defogger ■ Adjusting rear fan speed Press “” on to increase the fan speed and “” to decrease the fan speed. The fan speed is shown on the control panel. (4 levels) Press to turn the fan off.
Page 401 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Adjusting: Direct air flow to the left or right, up or down.
Page 402 There may be a problem in the air conditioning system if the indicator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ Air conditioning odors ●...
Page 403 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 404: Front Automatic Air Conditioning System
3-1. Using the air conditioning system and defogger  Front automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Front air conditioning on/off switch Changes the front air outlets used Rear fan speed Changes the rear air outlets used Driver’s side temperature control dial...
Page 405 3-1. Using the air conditioning system and defogger Multi-information display Automatic mode indicator Front Airflow display Passenger’s side temperature setting Driver’s side display temperature setting display Front fan speed display Air conditioning on indicator Rear airflow display Rear fan speed display Rear temperature setting display Using the automatic mode STEP...
Page 406 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). The air conditioning system switches between individual and simulta- neous modes each time is pressed.
Page 407 3-1. Using the air conditioning system and defogger Adjusting the settings manually ■ Basic setting STEP To turn on the air conditioning system and adjust the fan speed, press “” on to increase the fan speed and “” to decrease the fan speed. Press to turn the fan off.
Page 408 3-1. Using the air conditioning system and defogger The air outlets switch each time is pressed. The air flow shown on the display indicates the following. Air flows to the upper body. Air flows to the upper body and feet. Air flows mainly to the feet.
Page 409 3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (introduces air from out- side the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed.
Page 410 3-1. Using the air conditioning system and defogger ■ Adjusting the fan speed Press “” on to increase the fan speed and “” to decrease the fan speed. Press to turn the fan off. ■ Changing the air outlets Press The air outlets switch each time the button is pressed.
Page 411 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Adjusting: Direct air flow to the left or right, up or down.
Page 412 3-1. Using the air conditioning system and defogger ■ Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions. As a result, the following may occur. ● Immediately after is pressed, the fan may stop for a while until warm or cool air is ready to flow.
Page 413 There may be a problem in the air conditioning system if the indi- cator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ Air conditioning odors ●...
Page 414: Rear Manual Air Conditioning System
3-1. Using the air conditioning system and defogger  Rear manual air conditioning system Changes the air outlet used Temperature control dial Fan speed control dial Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool).
Page 415 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press the desired Air flows as shown below according to the mode selected. Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet.
Page 416 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Direct air flow to the front or rear, up or down. NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is off.
Page 417: Rear Automatic Air Conditioning System
3-1. Using the air conditioning system and defogger  Rear automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Simultaneous mode indicator Fan speed display Temperature setting display Fan speed control Temperature setting Airflow Automatic display...
Page 418 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Press “” on to increase the temperature and “” to decrease the temperature. ■ Changing the air outlets Press the desired Air flows as shown below according to the mode selected. Air flows to the upper body.
Page 419 3-1. Using the air conditioning system and defogger Air flows to the feet. ■ Adjusting the fan speed Press “” on to increase the fan speed and “” to decrease the fan speed. Press to turn the fan off. Adjusting the position of the air outlets Direct air flow to the front or rear, up or down.
Page 420 3-1. Using the air conditioning system and defogger ■ Temperature display The temperature display (English/U.S. Customary System and metric units) on the trip information display can be changed. (P. 260) ■ When the front air conditioning system is in simultaneous mode “SYNC”...
Page 421: Rear Window And Outside Rear View Mirror Defoggers, And Windshield Wiper De-Icer
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers, and windshield wiper de-icer The rear window defogger is used to defog the rear window. The out- side rear view mirror defoggers are used to remove frost, dew or raindrops from the outside rear view mirrors.
Page 422 3-1. Using the air conditioning system and defogger ■ The defogger can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is IGNITION ON mode. ■...
Page 423: 3-2. Using The Audio System
3-2. Using the audio system  Audio system type With navigation system Owners of models equipped with a navigation system should refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”. Without navigation system Type A and B: CD player with AM/FM radio Type C: CD player with changer and AM/FM radio.
Page 424 3-2. Using the audio system Type B Type C SIENNA_OM_OM45483U_(U)
Page 425 3-2. Using the audio system Title Page Using the radio P. 428 Using the CD player P. 438 Playing back MP3 and WMA discs P. 447 Operating an iPod P. 458 Operating a USB memory P. 465 Optimal use of the audio system P.
Page 426 3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. CAUTION ■ For vehicles sold in the U.S.A. ●...
Page 427 3-2. Using the audio system NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system. SIENNA_OM_OM45483U_(U)
Page 428: Using The Radio
3-2. Using the audio system Using the radio Type A Power Volume Adjusting the frequency Station selector (AM, FM mode) or channel (SAT mode) Seeking the Changing the channel frequency AM•SAT/FM mode buttons Displaying radio text messages Scanning for receivable stations SIENNA_OM_OM45483U_(U)
Page 429 3-2. Using the audio system Type B and C Power Volume Adjusting the frequency Station selector (AM, FM mode) or channel (SAT mode) Seeking Changing the channel the frequency Silencing the sound Displaying radio text messages Scanning for receivable stations AM/FM/SAT mode button Selecting the preset station pages SIENNA_OM_OM45483U_(U)
Page 430 3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) STEP Search for desired stations by turning pressing “” or “” on STEP Press and hold the button (from or one of until you hear a beep. Type B and C: Each time is pressed, station pages are changed.
Page 431 3-2. Using the audio system ® Scanning radio stations (excluding XM Satellite Radio) ■ Scanning the preset radio stations STEP Press and hold until you hear a beep. Preset stations will be played for 5 seconds each. STEP When the desired station is reached, press once again.
Page 432 3-2. Using the audio system ® Satellite Radio (if equipped) ■ ® Receiving XM Satellite Radio STEP Press The display changes as follows each time the button is pressed. Type A AM SAT1  SAT2  SAT3 Type B and C AM ...
Page 433 3-2. Using the audio system ■ Changing the channel category Press “” or “” on ■ ® Scanning XM Satellite Radio channels ● Scanning channels in the current category STEP Press STEP When the desired channel is reached, press the button again.
Page 434 3-2. Using the audio system Silencing the sound (type B and C) Press Press the button again to turn the system back on. ■ When the battery is disconnected (type A only) All preset stations are erased. ■ Radio antenna type ●...
Page 435 3-2. Using the audio system ■ ® Receiving XM Satellite Radio ® An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 con- tiguous states and 10 Canadian provinces. ●...
Page 436 ANTENNA securely. CHECK There is a short-circuit in the antenna or the sur- ANTENNA rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryp- ®...
Page 437 3-2. Using the audio system There is no song/program title or artist name/fea- ----- ture associated with the channel at that time. No action needed. The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to CHANNEL NOT the previous channel or “CH001”.
Page 438: Using The Cd Player
3-2. Using the audio system Using the CD player Type A Power Volume Reverse CD eject Fast-forward Selecting Selecting a track a track Searching playback Playback Random playback Displaying text messages Repeat play SIENNA_OM_OM45483U_(U)
Page 439 3-2. Using the audio system Type B and C Power Volume CD eject CD load (type C only) Selecting a track/fast-forwarding Selecting a track and reversing Playback/ pause Playback Repeat play Displaying text messages Searching playback CD selection Random play Loading CDs ■...
Page 440 3-2. Using the audio system ■ Loading multiple CDs (type C only) STEP Press and hold until you hear a beep. STEP Insert a CD when the indicator on the slot turns from amber to green. The indicator on the slot turns to amber when the CD is inserted. STEP Insert the next CD when the indicator on the slot turns from amber to green again.
Page 441 3-2. Using the audio system Selecting a track Turn or press “” or “” on to select the desired track. Fast forwarding and rewinding tracks Type A Press Type B and C Press and hold “” or “” on Scanning tracks STEP Press The first 10 seconds of each track will be played.
Page 442 3-2. Using the audio system Selecting a CD (type C only) ■ Selecting a CD to play Press that corresponds to “DISC ” or “ DISC”. ■ Scanning loaded CDs STEP Press and hold until you hear a beep. The first 10 seconds of the first track on each CD will be played. To cancel, press again.
Page 443 3-2. Using the audio system Repeat play ■ Repeating a track Press that corresponds to “RPT”. To cancel, press the button again. ■ Repeating all of the tracks on a CD (type C only) Press that corresponds to “RPT” twice. To cancel, press the button again.
Page 444 Operation has stopped due to a high temper- ature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. ■ Discs that can be used Discs with the marks shown below can be used.
Page 445 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, DualDiscs or printable discs. Doing so may damage the player and/or the CD insert/eject function. ●...
Page 446 3-2. Using the audio system NOTICE ■ Player precautions Failure to follow the precautions below may result in damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ●...
Page 447: Playing Mp3 And Wma Discs
3-2. Using the audio system Playing MP3 and WMA discs Type A Power Volume CD eject Fast-forwarding Selecting Reversing Selecting a folder a file Selecting a file Playback Searching playback Repeat play Displaying text messages Random playback SIENNA_OM_OM45483U_(U)
Page 448 3-2. Using the audio system Type B and C Power Volume CD eject CD load (type C only) Selecting a file/fast-forwarding Selecting a file and reversing Playback/ pause Playback Repeat play Displaying text messages Searching playback CD selection Random play Loading and ejecting MP3 and WMA discs P.
Page 449 3-2. Using the audio system Selecting and scanning a folder ■ Selecting folders one at a time Press “” or “” on to select the desired folder. ■ Scanning the first file of all the folders STEP Press and hold until you hear a beep.
Page 450 3-2. Using the audio system Selecting and scanning files ■ Selecting one file at a time Turn the dial or press “” or “” on select the desired file. ■ Selecting the desired file by cueing the files in the folder STEP Press STEP...
Page 451 3-2. Using the audio system Fast forwarding and reversing files Type A Press Type B and C  Press and hold “ ” or “” on Playing and pausing files (type B and C) Press Random playback ■ Playing files from a particular folder in random order Press that corresponds to “RDM”.
Page 452 3-2. Using the audio system Repeat play ■ Repeating a file Press that corresponds to “RPT”. To cancel, press the button again. ■ Repeating all of the files in a folder Type A Press and hold until you hear a beep. To cancel, press the button again.
Page 453 Operation has stopped due to a high temper- ature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. ■ Discs that can be used P. 444 ■...
Page 454 3-2. Using the audio system ■ Lens cleaners P. 444 ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format.
Page 455 3-2. Using the audio system ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 456 3-2. Using the audio system ● Multi-sessions As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played. ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc.
Page 457 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 458: Operating An Ipod
3-2. Using the audio system  Operating an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod Open the cover and connect STEP an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on.
Page 459 3-2. Using the audio system Selecting a play mode STEP Press that corresponds to “BROWSE” to select iPod menu mode. STEP Press that corresponds to the desired play mode. ■ Play mode list First Second Third Fourth Play mode selection selection selection selection...
Page 460 3-2. Using the audio system ■ Selecting a list STEP Turn to display the first selection list. STEP Press to select the desired item. Pressing that corresponds to “MORE” changes to the second selection list. STEP Repeat the same procedure to select the desired song name. To return to the previous selection list, press that corresponds to “...
Page 461 3-2. Using the audio system Playing and pausing songs Press the Fast-forwarding and rewinding songs  Press and hold “ ” or “” on Shuffle playback ■ Playing songs from one playlist or album in random order Press that corresponds to “RDM”. To cancel, press the button twice.
Page 462 3-2. Using the audio system Switching the display Press Each time the button is pressed, the display changes in the following order: Track title  Track title/Artist name  Track title/Album name  Track title/Elapsed ■ About iPod ● Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Page 463 3-2. Using the audio system ■ Compatible models Model Generation Software version iPod 5th generation Ver. 1.2.0 or higher iPod nano 1st generation Ver. 1.3.0 or higher 2nd generation Ver. 1.1.2 or higher 3rd generation Ver. 1.0.0 or higher iPod touch 1st generation Ver.
Page 464 3-2. Using the audio system CAUTION ■ While driving Do not connect iPod or operate the controls on the iPod. NOTICE ■ To prevent damage to iPod ● Do not leave iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.
Page 465: Operating A Usb Memory
3-2. Using the audio system  Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory Open the cover and connect a STEP USB memory. Turn on the power of the USB memory if it is not turned on.
Page 466 3-2. Using the audio system Selecting and scanning a folder ■ Selecting a folder Press “” or “” on to select the desired folder. ■ Returning to the first file of the first folder Press and hold “” on until you hear a beep. ■...
Page 467 3-2. Using the audio system Selecting and scanning files ■ Selecting a file Turn or press “” or “” on to select the desired file. ■ Scanning the files in a folder STEP Press The first 10 seconds of each file will be played. To cancel, press again.
Page 468 3-2. Using the audio system Random playback ■ Playing files from a folder in random order Press that corresponds to “RDM”. To cancel, press the button twice. ■ Playing all the files from a USB memory in random order Press that corresponds to “RDM”...
Page 469 3-2. Using the audio system ■ USB memory functions Depending on the USB memory that is connected to the system, certain functions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions. ■ Error messages “USB ERROR”: This indicates a problem in the USB memory or its connec- tion.
Page 470 3-2. Using the audio system ● MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 471 3-2. Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags.
Page 472 3-2. Using the audio system CAUTION ■ While driving Do not connect USB memory or operate the controls on the USB memory. NOTICE ■ To prevent damage to USB memory ● Do not leave USB memory in the vehicle. The temperature inside the vehi- cle may become high, resulting in damage to the player.
Page 473: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality and ASL Type B and C Selector knob Selector buttons Menu button SIENNA_OM_OM45483U_(U)
Page 474 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode in the following order. “BAS”  “TRE”  “FAD”  “BAL”  “ASL” Type B and C STEP Press STEP Press that corresponds to the desired mode.
Page 475 3-2. Using the audio system ■ Adjusting sound quality Turning adjusts the level. Sound quality Mode Turn to the Turn to the Level mode displayed left right Low-pitched -5 to 5 tones Mid-pitched -5 to 5 High tones High-pitched -5 to 5 tones Front/rear Shifts to...
Page 476 3-2. Using the audio system ■ Adjusting the Automatic Sound Levelizer (ASL) Type A When “ASL” is selected, turning to the right changes the “ASL” level in the order of “LOW”, “MID” and “HIGH”. Turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
Page 477 3-2. Using the audio system ■ Setting the number of preset pages (type B and C) The number of preset pages desired can be set from 1 to 6. The initial setting is 6 pages. STEP Press STEP Press that corresponds to “MORE”. STEP Press that corresponds to “PRESET”.
Page 478: Using The Aux Port
3-2. Using the audio system Using the AUX port This port can be used to connect a portable audio device and listen to it using the vehicle’s speakers. Open the cover and connect STEP the portable audio device. STEP Press ■...
Page 479: Using The Steering Switches
3-2. Using the audio system  Using the steering switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navi- gation system. For details, refer to the manual provided with the audio system or navigation system.
Page 480 3-2. Using the audio system Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding the switch down until you hear a beep. Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time the button is pressed.
Page 481 3-2. Using the audio system Selecting a radio station STEP Press to select the radio mode. STEP Press “” or “” on to select a radio station. To scan for receivable stations, press and hold the switch until you hear a beep. Selecting a track/file or song ®...
Page 482 3-2. Using the audio system Selecting a disc in the CD changer (type C only) STEP Press to select the CD mode. STEP Press and hold “” or “” on until you hear a beep. Selecting a track/file or chapter (vehicles with rear seat entertainment system) STEP Press...
Page 483: Detachable Pole Antenna
3-2. Using the audio system  Detachable pole antenna The antenna can be removed. ■ Removing the antenna Place the included wrench STEP around the antenna. When not in use, the wrench is stored in glove box. Loosen the antenna with the STEP wrench and remove it.
Page 484 3-2. Using the audio system ■ Installing the antenna Tighten the antenna by one STEP hand until it will not turn any more. Using the wrench, tighten the STEP antenna an additional 1/8th turn (20 to 45 degrees) to secure it in place. After tightening the antenna, remove the wrench.
Page 485 3-2. Using the audio system NOTICE ■ To avoid damaging the antenna Remove the antenna in the following situations. ● When using an automatic carwash. ● When the antenna will touch the ceiling of a garage, etc. ● When covering the vehicle with a car cover. ■...
Page 486: Using The Bluetooth ® Audio
® 3-3. Using the Bluetooth audio system ®  Bluetooth audio system ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. ® This audio system supports Bluetooth , a wireless data system capable of playing portable audio music without cables.
Page 487 ® 3-3. Using the Bluetooth audio system ■ Conditions under which the system will not operate ● ® If using a portable player that does not support Bluetooth ● If the portable player is switched off ● If the portable player is not connected ●...
Page 488 Bluetooth audio system. However, please note that some functions may be limited depending on the type of portable player. ® Please go to “http://www.toyota.com/bluetooth” to find approved Bluetooth phones for this system. ■ ® Certification for the Bluetooth...
Page 489 ® 3-3. Using the Bluetooth audio system CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 490: Using The Bluetooth
® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system ■ Audio unit Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed. Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item ®...
Page 491 ® 3-3. Using the Bluetooth audio system Operating the system using voice commands By following voice guidance instructions output from the speaker, ® voice commands enable to the operation of the Bluetooth audio sys- tem without the need to check the display or operate ■...
Page 492 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system for the first time ® Before using the Bluetooth audio system, it is necessary to register ® a Bluetooth enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player: STEP Press...
Page 493 ® 3-3. Using the Bluetooth audio system STEP Select “Confirm” using a voice command or A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard. STEP Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player.
Page 494 ® 3-3. Using the Bluetooth audio system ® Menu list of the Bluetooth audio system ■ Normal operation Second First menu Third menu Operation detail menu “Pair Audio Registering a portable player Player” “Select Audio Selecting a portable player to Player”...
Page 495 ® 3-3. Using the Bluetooth audio system ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations in which the system may not recognize your voice ●...
Page 496: Operating A Bluetooth
® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Power Volume Selecting an album Selecting a track/ fast-forwarding Selector buttons and reversing Playback Playback/pause Displaying text messages Selecting an album Press “” or “” on Selecting tracks Press “”...
Page 497 ® 3-3. Using the Bluetooth audio system Playing and pausing tracks Press Fast-forwarding and rewinding tracks  Press and hold “ ” or “” on Switching the display Press Each time the button is pressed, the display changes in the following order: Track title ...
Page 498: Setting Up A Bluetooth ® Enabled Portable Player
® 3-3. Using the Bluetooth audio system ® Setting up a Bluetooth enabled portable player ® Registering a portable player in the Bluetooth audio system allows the system to function. The following functions can be used for reg- istered portable players: ■...
Page 499 ® 3-3. Using the Bluetooth audio system Registering a portable player Select “Pair Audio Player” using a voice command or , and perform the procedure for registering a portable player. (P. 492) Selecting a portable player to be used STEP Select “Select Audio Player”...
Page 500 ® 3-3. Using the Bluetooth audio system Vehicles without a smart key system When the portable player is on standby for the connection, it will be automatically connected whenever the engine switch is in either “ACC” or “ON” position. If a portable player that has already been paired is selected, it is nec- essary to select “From Car”...
Page 501 ® 3-3. Using the Bluetooth audio system Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud. When listing is complete, the system returns to “BT•A Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:...
Page 502 ® 3-3. Using the Bluetooth audio system Deleting a registered portable player STEP Select “Delete Audio Player” using a voice command or STEP Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or a.
Page 503: Bluetooth ® Audio System Setup
® 3-3. Using the Bluetooth audio system ® Bluetooth audio system setup ■ System setup items and operation procedures P. 569 SIENNA_OM_OM45483U_(U)
Page 504: 3-4. Using The Rear Audio System
3-4. Using the rear audio system  Rear seat entertainment system features The rear seat entertainment system is designed to allow the rear pas- sengers to enjoy audio and DVD video separately from the front audio system. Front audio system DVD player Display Headphone volume control dials and headphone jacks...
Page 505 3-4. Using the rear audio system Opening and closing the display ■ Opening and closing the display Press the lock release button to open the display. Pull the display down to an easily viewable angle (at 100 or 120). To close the display, push the display up until a click is heard.
Page 506 3-4. Using the rear audio system Loading a disc Open the cover. STEP Insert the disc into the slot with STEP the label side up. The “DISC” indicator light turns on while the disc is loaded. The player will play the track or chapter, and will repeat it after it reaches the end.
Page 507 3-4. Using the rear audio system Turning the rear seat entertainment system power on/off ■ Operating from the front audio system Selecting either the front audio system or DVD player audio for the speakers Press that corresponds to “OFF”, to turn off the rear seat entertainment system.
Page 508 3-4. Using the rear audio system Setting the rear seat entertainment system lock Vehicles with a navigation system Owners of models equipped with a navigation system should refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”. Vehicles without a navigation system Front audio system Selecting either the front audio system or DVD player audio for the speakers...
Page 509 3-4. Using the rear audio system Adjusting and turning off the screen ■ Adjusting the screen Press on the remote con- troller. Select the brightness, contrast, tone or color, and make adjust- ments. Press to input it. “-” or “Red” “+”...
Page 510 3-4. Using the rear audio system Headphone jacks To use the headphones, con- nect them to the jack. To adjust the volume Turn the knob clockwise to increase the volume. Turn the knob counterclock- wise to decrease the volume. ■ The rear seat entertainment system can be used when Vehicles without a smart key system The engine switch is in the “ACC”...
Page 511 • Operation is stopped • If the malfunction still due to a high tempera- exists, take the vehicle ture inside the player to your Toyota dealer This indicates that no No music files playable data is Eject the disc found...
Page 512 3-4. Using the rear audio system ■ Before using the remote controller (for new vehicle owners) Remove the cover. STEP Remove the insulating sheet. STEP ■ When the remote controller batteries are fully depleted Remove the depleted batteries and install new 2 AA batteries.
Page 513 When using AA batteries Batteries can be purchased at your Toyota dealer, electric appliance shops, or camera stores. Replace only with the same or equivalent type recommended by a Toyota dealer. Dispose of used batteries according to the local laws.
Page 514 3-4. Using the rear audio system CAUTION ■ While driving Do not use headphones. Doing so may cause an accident, resulting in death or serious injury. ■ When the rear seat entertainment system is not used Keep the display closed. In the event of an accident or sudden braking, the opened display may hit an occupant’s body, resulting in injury.
Page 515: Using The Dvd Player (Dvd Video)
3-4. Using the rear audio system Using the DVD player (DVD video) ■ Remote controller Turning on or off the rear entertainment screen Turning on the DVD mode Selecting a chapter Turning on the title selection screen Reversing a disc Playing/pausing a disc Turning on or off the opera- tion switches (icon) on the...
Page 516 3-4. Using the rear audio system ■ Display (Page 1) Turning off the operation switches (icon) on the dis- play Displaying page 2 Turning on the title selection screen for the disc Turning on the menu screen for the disc Reversing a disc Stopping a disc Pausing the disc/canceling...
Page 517 3-4. Using the rear audio system ■ Display (Page 2) Displaying the initial setting screen Displaying page 1 Search for a title Returning to the previous screen Changing the audio lan- guage Changing the subtitle lan- guage Changing the angle ■...
Page 518 3-4. Using the rear audio system NOTICE ■ To prevent damage to the remote controller ● Keep the remote control away from direct sunlight, temperature heat and high humidity. ● Do not drop or knock the remote controller against hard objects. ●...
Page 519 3-4. Using the rear audio system Turning on the menu screen Press or select to turn on the menu screen. For the operation of the menu screen, see the separate manual for the DVD disc. Slow playback Press or select to pause video and then press or select .
Page 520 3-4. Using the rear audio system Searching for a title STEP Select on the control icon screen. Input the desired title number STEP and then select : deletes the last input number : returns to the previous screen Changing the subtitle language STEP Select on the control icon screen.
Page 521 3-4. Using the rear audio system Changing the audio language STEP Select on the control icon screen. STEP Select to display the audio language screen. Each time you press the next available language is selected. : returns to the previous screen Changing the angle STEP...
Page 522 3-4. Using the rear audio system ■ DVD player and DVD video discs This DVD player is compatible NTSC color TV formats. DVD video discs conforming to other formats such as PAL or SECAM cannot be used. ■ Region codes Some DVD video discs have a region code indicating where you can use them.
Page 523 3-4. Using the rear audio system ■ DVD video disc glossary ● DVD video discs: Digital Versatile Discs that hold world’s standard video. DVD video discs have adopted “MPEG2”, one of the world standards of digital compression technologies. The picture data is compressed by 1/ 40 on average and stored.
Page 524 3-4. Using the rear audio system ● Multi-angle feature: Allows you to enjoy the same scene at different angles. ● Multi-language feature: Allows you to select the language of the subtitles and audio. ● Region codes: Region codes are provided on DVD players and DVD discs.
Page 525: Using The Dvd Player (Video Cd)
3-4. Using the rear audio system Using the DVD player (video CD) ■ Remote controller Selecting a switch (icon) Selecting a chapter Reversing a disc Playing/pausing a disc Fast forwarding a disc Inputting selected switch (icon) ■ Display (page 1) Turning off the menu screen Displaying page 1 Reversing a disc...
Page 526 3-4. Using the rear audio system ■ Display (page 2) Selecting a disc menu num- Displaying page 2 Turning on the disc menu Returning to the previous page screen (with the disc menu displayed) Proceeding to the next page screen (with the disc menu displayed) Changing to a multiplex transmission...
Page 527 3-4. Using the rear audio system Selecting a desired screen ■ Selecting a menu number STEP Select on the control icon screen. Input the desired menu number STEP and select : deletes the last input num- : returns to the previous screen ■...
Page 528 3-4. Using the rear audio system Changing the sound-multiplex mode Select on the control icon screen. The mode cycles through each time the is pressed. “Main”  “Sub”  “Main/Sub” Slow playback Press or select to pause video and then press or select .
Page 529: Using The Dvd Player (Audio Cd/Cd Text)
3-4. Using the rear audio system Using the DVD player (audio CD/CD text) Press to display the control screen. Repeat play Random playback Search playback ■ Front audio system Press: Selecting a chapter Press and hold: Fast-for- warding/reversing a disc Playing/pausing a disc Selecting the DVD mode Repeat play (P.
Page 530: Using The Dvd Player (Wma/Mp3 Discs)
3-4. Using the rear audio system Using the DVD player (WMA/MP3 discs) ■ Using the control screen Press to display the control screen. Repeat play Random playback Search playback ■ Front audio system Press: Selecting a chapter Press and hold: Fast-for- warding/reversing a disc Playing/pausing a disc Selecting the DVD mode...
Page 531 3-4. Using the rear audio system Random playback ■ Playing files from a particular folder in random order Select ■ Playing all of the files on a disc in random order Select , and press and hold Search playback ■ Selecting the desired file by cueing the files in the folder Select The player will scan all the files in the folder.
Page 532: Using The Video Mode
3-4. Using the rear audio system Using the video mode Press to select the video mode. Before switching to the video mode, connect audio device to the A/V input port. Using the port Type A Open the cover. The A/V input port is composed of 3 input ports.
Page 533 3-4. Using the rear audio system ■ A/V input port The rear seat entertainment system plays video and sound when an audio- video device is connected to the A/V input port. For details, refer to the man- ufacturer’s instructions. ■ Power outlet The power outlet is used to connect the audio device.
Page 534: Changing The Dvd Initial Setting
3-4. Using the rear audio system Changing the DVD initial setting Select to display the initial setting screen. The following initialization can be changed here. ● Audio language ● Subtitle language ● DVD language ● Angle mark ● Parental lock SIENNA_OM_OM45483U_(U)
Page 535 3-4. Using the rear audio system Changing the audio language Select “Audio Language”. Select the language you want to hear, and press to input : returns to the previous screen Select “Others” if you cannot find the language you want to hear. Enter the appropriate 4-digit lan- guage code.
Page 536 3-4. Using the rear audio system Changing the subtitle language Select “Subtitle Language”. Select the language you want to read, and press to input : returns to the previous screen Select “Others” if you cannot find the language you want to read. Enter the appropriate 4-digit lan- guage code.
Page 537 3-4. Using the rear audio system Changing the DVD language Select “DVD Language”. Select the language you want to read, and press to input : returns to the previous screen Select “Others” if you cannot find the language you want to read. Enter the appropriate 4-digit lan- guage code.
Page 538 3-4. Using the rear audio system Turning on or off the angle mark The angle mark can be turned on for discs that are multi-angle com- patible. Each time you press when “Angle Mark” is selected, the angle mark turns on or off alternately. SIENNA_OM_OM45483U_(U)
Page 539 3-4. Using the rear audio system Setting viewer restriction levels Setting a password allows the viewer restriction to be effective. Input the desired personal code and select : deletes the last input number : returns to the previous screen The setting cannot be changed unless the password is entered.
Page 540 3-4. Using the rear audio system Setting the display mode ■ Display size Single screen mode: Pressing changes the display modes sequentially as follows: Normal  Wide  Super wide Ultra wide  Ultra zoom Split screen mode: Pressing changes the display mode sequentially as fol- lows: Normal/Normal ...
Page 541 3-4. Using the rear audio system ■ Returning to the previous screen Select and press ■ To initialize the password Press on the remote controller or unit ten times when the screen to enter the personal code is displayed. ■ When changing the display size ●...
Page 542 3-4. Using the rear audio system ■ Language code list Code Language Code Language 0514 English 0208 Bihari 0618 French 0209 Bislama 0405 German 0214 Bengali 0920 Italian 0215 Tibetan 0519 Spanish 0218 Breton 2608 Chinese 0301 Catalan 1412 Dutch 0315 Corsican 1620...
Page 543 3-4. Using the rear audio system Code Language Code Language 0721 Gujarati 1311 Macedonian 0801 Hausa 1312 Malayalam 0809 Hindi 1314 Mongolian 0818 Croatian 1315 Moldavian 0821 Hungarian 1318 Marathi 0825 Armenian 1319 Malay 0901 Interlingua 1320 Maltese 0905 Interlingue 1325 Burmese 0911...
Page 544 3-4. Using the rear audio system Code Language Code Language 1914 Shona 2014 Setswana 1915 Somali 2015 Tonga 1917 Albanian 2018 Turkish 1918 Serbian 2019 Tsonga 1919 Siswati 2020 Tatar 1920 Sesotho 2023 1921 Sundanese 2111 Ukrainian 1923 Swahili 2118 Urdu 2001 Tamil...
Page 545: Using The Hands-Free Phone System (For Cellular Phone)
3-5. Using the hands-free phone system (for cellular phone)  Hands-free phone system (for cellular phone) features The hands-free system is a function that allows you to use your cel- lular phone without touching it. ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone to the system, and without operating the cellular phone.
Page 546: Using The Hands-Free
3-5. Using the hands-free phone system (for cellular phone) Title Page Using the hands-free phone system ■ Operating the system using a voice command ■ Using the hands-free phone system for P. 550 the first time ■ Menu list of the hands-free phone sys- Making a phone call ■...
Page 547: Using The Hands-Free
3-5. Using the hands-free phone system (for cellular phone) ■ Conditions under which the system will not operate ● ® If using a mobile phone that does not support Bluetooth ● If the mobile phone is switched off ● If you are outside service range ●...
Page 548 If your cellular phone supports OPP alone, you cannot use the ® Bluetooth phone. ® Please go to “http://www.toyota.com/bluetooth” to find approved Bluetooth phones for this system. ■ Certification for the hands-free phone system FCC ID: AJDK025 IC ID: 775E-K025...
Page 549 3-5. Using the hands-free phone system (for cellular phone) CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 550: Phone)
3-5. Using the hands-free phone system (for cellular phone)  Using the hands-free phone system (for cellular phone) ■ Audio unit Displays such items as messages, name, phone number Lower-case characters and special characters, such as an umlaut, cannot be dis- played.
Page 551 3-5. Using the hands-free phone system (for cellular phone) ■ Steering wheel telephone switches Volume The voice guidance volume cannot be adjusted using this button. Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys- tem on Press and hold: Voice com- mand system off...
Page 552 3-5. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating ■...
Page 553 3-5. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered.
Page 554 3-5. Using the hands-free phone system (for cellular phone) Registration to the hands-free phone system only STEP Select “Phone Only” using a voice command or ® Registration to the hands-free phone system and Bluetooth audio system at the same time STEP Select “Internal Audio (Int, Audio)”...
Page 555 3-5. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system ■ Normal operation Second First menu Third menu Operation detail menu Dialing a number stored in “Callback” the incoming call history memory Dialing a number stored in “Redial”...
Page 556 3-5. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu “Set PIN” Setting a PIN code “Phonebook Locking the phone book “Security” Lock” “Phonebook Unlocking the phone book Unlock” Registering the cellular “Pair Phone” phone to be used “Change Changing a registered name...
Page 557 3-5. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dialing a number registered “Dial XXX (name)” in the phone book “Dial XXX (number)” Dialing the input numbers “Phone book add Adding a new number entry”...
Page 558 3-5. Using the hands-free phone system (for cellular phone) ■ Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. ■...
Page 559: Making A Phone Call
3-5. Using the hands-free phone system (for cellular phone) Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redial”...
Page 560 3-5. Using the hands-free phone system (for cellular phone) Dialing by inputting a number STEP Press the talk switch and say “Dial by number”. STEP Press the talk switch and say the phone number. STEP Dial by one of the following methods: a.
Page 561 3-5. Using the hands-free phone system (for cellular phone) Speed dialing STEP Press the off-hook switch. STEP Press the preset button in which the desired number is regis- tered. STEP Press the off-hook switch. When receiving a phone call ■ Answering the phone Press the off-hook switch.
Page 562 3-5. Using the hands-free phone system (for cellular phone) Using the call history memory Follow the procedure below to use a number stored in the call history memory: STEP Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back”...
Page 563 3-5. Using the hands-free phone system (for cellular phone) ■ Call history Up to 5 phone numbers can be stored in each of the outgoing and incoming call history memories. ■ When talking on the phone ● Do not talk simultaneously with the other party. ●...
Page 564: Setting A Cellular Phone
3-5. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a voice command or ●...
Page 565 3-5. Using the hands-free phone system (for cellular phone) Registering a cellular phone Select “Pair Phone” using a voice command or , and do the procedure for registering a cellular phone. (P. 553) Selecting the cellular phone to be used STEP Select “Select Phone”...
Page 566 3-5. Using the hands-free phone system (for cellular phone) Changing a registered name STEP Select “Change Name” using a voice command or STEP Select the name of the cellular phone to be changed by one of the following methods: a. Press the talk switch and say the desired phone name, and select “Confirm”...
Page 567 3-5. Using the hands-free phone system (for cellular phone) Listing the registered cellular phones Selecting “List Phones” using a voice command or causes the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available:...
Page 568 3-5. Using the hands-free phone system (for cellular phone) Changing the passkey STEP Select “Set Passkey” using a voice command or STEP Press the talk switch, say a 4 to 8-digit number, and select “Confirm” using a voice command or The number should be input 1 digit at a time.
Page 569: Security And System Setup
3-5. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure ● Setting or changing the PIN (Personal Identification Number) 1.
Page 570 3-5. Using the hands-free phone system (for cellular phone) Setting or changing the PIN ■ Setting a PIN STEP Select “Set PIN” using a voice command or STEP Enter a PIN using a voice command or When using , input the code 1 digit at a time. ■...
Page 571 3-5. Using the hands-free phone system (for cellular phone) Locking or unlocking the phone book STEP Select “Phonebook Lock (Phbk Lock)” or “Phonebook unlock (Phbk Unlock)” using a voice command or STEP Input the PIN by either of the following methods and select “Confirm”...
Page 572 3-5. Using the hands-free phone system (for cellular phone) ® Displaying the Bluetooth device address and name STEP Select “Device Name” using ® STEP Turn to display the Bluetooth device address and name. STEP Select “Go Back” using to return to “System Setup”. Initialization STEP Select “Initialize”...
Page 573 3-5. Using the hands-free phone system (for cellular phone) ■ Initialization ● The following data in the system can be initialized: • Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code ●...
Page 574: Using The Phone Book
3-5. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook”  2. “Add Entry” ● Setting speed dial 1.
Page 575 3-5. Using the hands-free phone system (for cellular phone) ■ Adding procedure STEP Select “Add Entry” using a voice command or STEP Use one of the following methods to input a phone number: Inputting a phone number using a voice command STEP2-1: Select “By Voice”...
Page 576 3-5. Using the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1: Select “Manual Input” using STEP2-2: Input a phone number using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call his- tory STEP2-1: Select “Call History”...
Page 577 3-5. Using the hands-free phone system (for cellular phone) STEP Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or a. Press the talk switch and say the desired name. b.
Page 578 3-5. Using the hands-free phone system (for cellular phone) Setting speed dials STEP Select “Set Speed Dial (Speed Dial)” using a voice command STEP Select the data to be registered as a speed dial by one of the following methods: a.
Page 579 3-5. Using the hands-free phone system (for cellular phone) Changing a registered name STEP Select “Change Name” using a voice command or STEP Select the name to be changed by one of the following meth- ods. a. Press the talk switch, say desired name, and select “Con- firm”...
Page 580 3-5. Using the hands-free phone system (for cellular phone) Deleting registered data STEP Select “Delete Entry” using a voice command or STEP Select the data to be deleted by either of the following meth- ods, and select “Confirm” using a voice command or a.
Page 581 3-5. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following functions will be available.
Page 582: 3-6. Using The Interior Lights
3-6. Using the interior lights Interior lights list Outer foot lights (if equipped) Rear interior light Rear personal/interior lights (P. 585) Rear ceiling lights (if equipped) (P. 586) Front personal/interior lights (P. 584) Engine switch light (if equipped) Front door courtesy lights (if equipped) SIENNA_OM_OM45483U_(U)
Page 583: Personal/Interior Light Main Switch
3-6. Using the interior lights Personal/interior light main switch Personal/interior light main switch (vehicles with overhead console) Type A Push to activate the inte- rior lights. The personal/interior lights can- not be individually turned off with this switch. Door position When door mode is active it will Type B be indicated by a green light on...
Page 584: Personal/Interior Lights
3-6. Using the interior lights Personal/interior lights Personal/interior lights (vehicles with overhead console) Front type A On/off Front type B SIENNA_OM_OM45483U_(U)
Page 585 3-6. Using the interior lights Personal/interior lights Rear On/off Rear personal/interior lights turn on when the personal/interior main switch is in door position. Personal/interior lights can also be turned on/off from each indi- vidual light. When an individual light is activated it must be turned off at its location.
Page 586: Personal Lights
3-6. Using the interior lights Personal lights and rear ceiling lights Personal lights (vehicles without overhead console) Front On/off Rear On/off Rear ceiling lights (if equipped) On/off SIENNA_OM_OM45483U_(U)
Page 587 30 seconds. ■ Customization that can be configured at Toyota dealer Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features: P. 828) NOTICE ■...
Page 588: 3-7. Using The Storage Features
3-7. Using the storage features List of storage features Auxiliary boxes Cup holders Door pockets Bottle holders Overhead console (if equipped) Glove boxes Console box (if equipped) SIENNA_OM_OM45483U_(U)
Page 589: Glove Boxes
3-7. Using the storage features Glove boxes CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●...
Page 590 3-7. Using the storage features Glove boxes Lower glove box The lower glove box can be opened by pulling the lever and can be locked and unlocked by using the master key (vehicles without a smart key) or the mechanical key (vehicles with a smart key system). Unlock Lock Open...
Page 591: Console Box
3-7. Using the storage features Console box Console box (if equipped) ■ Using the console box Type A Press the tab. Type B Press the tab. SIENNA_OM_OM45483U_(U)
Page 592 3-7. Using the storage features Console box ■ Sliding the console box (type B) From front Press the tab and slide the console box. From rear Pull up the lever and slide the console box. ■ Console box light The console box light turns on when the headlight switch is on. SIENNA_OM_OM45483U_(U)
Page 593 3-7. Using the storage features Console box CAUTION ■ Caution while driving Keep the console box closed when not in use. In the event of sudden brak- ing or sudden swerving, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
Page 594: Overhead Console
3-7. Using the storage features Overhead console Overhead console (if equipped) Push the lid. The overhead console is useful temporarily storing small items. CAUTION ■ While driving Do not leave the overhead console open. Items may fall out and cause injury. ■...
Page 595: Cup Holders
3-7. Using the storage features Cup holders Cup holders Front Press in and release the front cup holder. Console box (if equipped) Console box type A (if equipped) Pull the lid down. SIENNA_OM_OM45483U_(U)
Page 596 3-7. Using the storage features Cup holders Console box type B (if equipped) Second center seat (if equipped) Removing the second center seat. (P. 107) Rear SIENNA_OM_OM45483U_(U)
Page 597 3-7. Using the storage features Cup holders ■ Removing the separator (front) Pull the separator up. The separator may be removed for clean- ing. ■ Cup holder light (console box type A and B) The cup holder light turns on when the headlight switch is on. CAUTION ■...
Page 598: Bottle Holders
3-7. Using the storage features Bottle holders Bottle holders Type A Type B SIENNA_OM_OM45483U_(U)
Page 599 3-7. Using the storage features Bottle holders CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 600: Door Pockets
3-7. Using the storage features Door pockets Door pockets Type A Type B NOTICE ■ Door pockets (type B) Make sure magazines are not bent or protruding from the sliding door pockets. Do not insert anything too big so that the shape of the sliding door pockets is dis- torted.
Page 601: Auxiliary Boxes
3-7. Using the storage features Auxiliary boxes Auxiliary boxes Type A Push down the knob. Type B (if equipped) Type C SIENNA_OM_OM45483U_(U)
Page 602 3-7. Using the storage features Auxiliary boxes Type D (if equipped) Type E (if equipped) Type F Lift the lid. SIENNA_OM_OM45483U_(U)
Page 603 3-7. Using the storage features Auxiliary boxes Type G (if equipped) Removing the second center seat. (P. 107) ITN37N026 Type H (if equipped) ITN37N027 Type I (if equipped) SIENNA_OM_OM45483U_(U)
Page 604 3-7. Using the storage features Auxiliary boxes Type J (if equipped) Type K (if equipped) SIENNA_OM_OM45483U_(U)
Page 605 3-7. Using the storage features Auxiliary boxes ■ Coin holder (type A) Nickels, quarters and dimes can be stored separately. CAUTION ■ Caution while driving (type A and F) Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking. SIENNA_OM_OM45483U_(U)
Page 606: 3-8. Other Interior Features
3-8. Other interior features Sun visors To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it back- ward.
Page 607: Vanity Mirrors
3-8. Other interior features Vanity mirrors Flip down. Open the cover. The light turns on when the cover is opened. NOTICE ■ To prevent battery discharge Do not leave the vanity lights on for extended periods while the engine is off. SIENNA_OM_OM45483U_(U)
Page 608: Clock
3-8. Other interior features  Clock Vehicles with multi-information display P. 256 Vehicles without multi-information display Adjusts the hours. Adjusts the minutes. ■ The clock is displayed when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP”...
Page 609: Conversation Mirror
3-8. Other interior features  Conversation mirror The conversation mirror can provide the driver and the front passen- ger with a view of the rear seat area without the need to turn around. Push the lid and allow the lid STEP to open.
Page 610: Power Outlets
3-8. Other interior features Power outlets The power outlet can be used for the following components: 12 V: Accessories that run on less than 10 A 120 V AC: Accessories that use less than 100 W ■ 12 V Center panel type A Center panel type B SIENNA_OM_OM45483U_(U)
Page 611 3-8. Other interior features Luggage compartment ■ 120 V AC (if equipped) Power outlet socket console box type A Power outlet socket console box type B SIENNA_OM_OM45483U_(U)
Page 612 3-8. Other interior features Power outlet socket luggage compartment ■ The power outlet can be used when Vehicles without a smart key system 12 V: The engine switch is in the “ACC” or “ON” position. 120 V AC: The engine switch is in the “ON” position. Vehicles with a smart key system 12 V: The “ENGINE START STOP”...
Page 613 3-8. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■...
Page 614: Seat Heaters
3-8. Other interior features  Seat heaters For driver’s seat For front passenger’s seat The indicator light comes on. Adjusts the seat tempera- ture The further you move the dial upward, the warmer the seat becomes. ■ The seat heaters can be used when Vehicles without a smart key system The engine switch is in the “ON”...
Page 615 3-8. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
Page 616: Armrests
3-8. Other interior features Armrests Front seat Pull the armrest down for use. Second seat (if equipped) Pull the armrest down for use. SIENNA_OM_OM45483U_(U)
Page 617 3-8. Other interior features ■ Adjusting the armrests (if equipped) Push the armrest down while pressing the button. NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. SIENNA_OM_OM45483U_(U)
Page 618: Assist Grips
3-8. Other interior features Assist grips An assist grip (Type A) installed on the ceiling can be used to sup- port your body while sitting on the seat. An assist grip (Type B) installed on the pillar can be used when get- ting in or out of the vehicle and others.
Page 619: Rear Side Sunshades
3-8. Other interior features  Rear side sunshades Rear door window Pull the tab up. Secure the sunshade using the hooks. To retract the sunshade, pull the tab up slightly to unhook the sunshade, and lower the sunshade slowly. Rear quarter window Pull the tab up.
Page 620: Grocery Bag Hooks
3-8. Other interior features Grocery bag hooks The hooks are designed to hang things like a grocery bag. Type A (front seatback) (if equipped) Type B (third seatback) Type C (luggage compartment) Pull the hook up. SIENNA_OM_OM45483U_(U)
Page 621 3-8. Other interior features Type D (luggage compartment) ITN38N036 CAUTION ■ When not in use (type C) Keep the grocery bag hook stowed. Injuries may result in the event of sudden braking, sudden swerving or an accident. NOTICE ■ Grocery bag hook weight capacity (type A and B) Do not hang any object heavier than 8.8 lb.
Page 622: Floor Mat
3-8. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks STEP (clips) into the floor mat eye- lets.
Page 623 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 624: Luggage Compartment Features
3-8. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Cargo net hooks Pattern 1 Pattern 2 SIENNA_OM_OM45483U_(U)
Page 625 3-8. Other interior features ■ Storage box (if equipped) Engage the latch buckle. CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their positions when they are not in use. NOTICE ■...
Page 626: Garage Door Opener
3-8. Other interior features  Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 627 3-8. Other interior features ■ ® Programming the HomeLink Point the remote control for the STEP device 1 to 3 in. (25 to 75 mm) ® from the HomeLink control but- tons. Keep the indicator light on the ® HomeLink in view while pro- gramming.
Page 628 3-8. Other interior features Test operation STEP ® HomeLink pressing newly programmed button. If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the Rolling Code type.
Page 629 3-8. Other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the ® heading “Programming the HomeLink ” before proceeding with the steps listed below. STEP Locate the training button on the ceiling mounted garage door opener motor.
Page 630 ® the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 631 3-8. Other interior features ® Operating the HomeLink ® ® Press the appropriate HomeLink button. The HomeLink indicator ® light on the HomeLink transceiver should turn on. ® The HomeLink continues to send a signal for up to 20 seconds as long as the button is pressed.
Page 632 3-8. Other interior features ■ Before programming ● Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from the ® HomeLink button. ■ Certification for the garage door opener For vehicles sold in the U.S.A. FCC ID: NZLWZLHL4 NOTE: This device complies with Part 15 of the FCC Rules.
Page 633 3-8. Other interior features CAUTION ■ When programming a garage door or other remote control device The garage door may operate, so ensure people and objects are out of dan- ger to prevent potential harm. ■ Conforming to federal safety standards ®...
Page 634: Compass
3-8. Other interior features  Compass The compass on the trip information display indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press the switch. ■ Displays and directions Display Direction North Northeast East...
Page 635 3-8. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 636 3-8. Other interior features ■ Deviation calibration STEP Stop the vehicle where it is safe to drive in a circle. Press and hold the switch. STEP A number (1 to 15) appears on the compass display. STEP Referring to the map above, press the switch to select the number of the zone you are in.
Page 637 3-8. Other interior features ■ Conditions unfavorable to correct operation The compass may not show the correct direction in the following conditions: ● The vehicle is stopped immediately after turning. ● The vehicle is on an inclined surface. ● The vehicle is in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).
Page 638 3-8. Other interior features NOTICE ■ To avoid a compass malfunctions Do not place magnets or any metal objects near the roof of the vehicle. Doing this may cause a malfunction of the compass sensor. ■ To ensure normal operation of the compass ●...
Page 639: Safety Connect
Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Con- nect service is subject to such then-applicable Terms and Condi- tions.
Page 640 After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase. Contact your Toyota dealer, call 1-800-331-4331, or push the “SOS” but- ton in your vehicle for further subscription details. SIENNA_OM_OM45483U_(U)
Page 641 Safety Connect. ● Safety Connect is available beginning Fall 2009 on select Toyota models. Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection avail- ability, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support.
Page 642 ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunc- tion (contact your Toyota dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services ■...
Page 643 In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com. ■ Emergency Assistance Button (“SOS”) In the event of an emergency on the road, push the “SOS”...
Page 644 3-8. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
Page 645 3-8. Other interior features ■ Certification for Safety Connect FCC ID: O9EGTM1 FCC ID: O6Y-CDMRF101 NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation.
Page 646 3-8. Other interior features SIENNA_OM_OM45483U_(U)
Page 647 Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior..648 Cleaning and protecting the vehicle interior..653 4-2. Maintenance Maintenance requirements ....657 General maintenance..660 Emission inspection and maintenance (I/M) programs......664 4-3. Do-it-yourself maintenance Do-it-yourself service precautions ....
Page 648: Cleaning And Protecting The Vehicle Exterior
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 649 4-1. Maintenance and care ■ High pressure car washes ● Do not allow the nozzles of the car wash to come within close proximity of the windows. ● Before using car wash, check that the fuel filler door on your vehicle is closed properly.
Page 650 4-1. Maintenance and care CAUTION ■ When washing the vehicle Do not apply water to the inside of the engine compartment. Doing so may cause the electrical components etc. to catch fire. ■ When cleaning the windshield (vehicles with rain-sensing windshield wiper) Set the wiper switch to off.
Page 651 Precaution regarding the Blind Spot Monitor If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer. NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.)
Page 652 4-1. Maintenance and care NOTICE ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surface of the lights. ● Do not apply wax on the surfaces of the lights. Wax may cause damage to the lenses.
Page 653: Cleaning And Protecting The Vehicle Interior
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 654 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 655 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 656 4-1. Maintenance and care NOTICE ■ Water on the floor Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components such as the audio system above or under the floor of the vehicle.
Page 657: Maintenance Maintenance Requirements
It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 658 4-2. Maintenance ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 659 4-2. Maintenance CAUTION ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
Page 660: General Maintenance
“Owner’s Warranty Informa- tion Booklet” “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Battery Check connections.
Page 661 4-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should Accelerator pedal move smoothly (without uneven pedal effort or catching). • When parked on a slope with the Automatic transaxle “Park” mech- shift lever in P, is the vehicle anism securely stopped? •...
Page 662 4-2. Maintenance Items Check points • Do the indicators and buzzers Indicators/buzzers function properly? • Do all the lights come on? Lights • Are the headlights aimed cor- rectly? • Does the parking brake lever or pedal move smoothly? Parking brake •...
Page 663 4-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock sys- Engine hood tem work properly? • There should not be any signs of Fluid leaks fluid leakage after the vehicle has been parked.
Page 664: Emission Inspection And Maintenance (I/M) Programs
If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 665: Do-It-Yourself Maintenance Do-It-Yourself Service Precautions
Brake fluid level (P. 681) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 666 4-3. Do-it-yourself maintenance Items Parts and tools • “Toyota Genuine Motor Oil” or equivalent P. 674) Engine oil level • Rag or paper towel • Funnel (used only for adding engine oil) • Fuse with same amperage rating Fuses (P. 711) as original •...
Page 667 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: ■ When working on the engine compartment: ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
Page 668 4-3. Do-it-yourself maintenance CAUTION ■ Safety glasses Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in your eyes. NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
Page 669: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Pull up the auxiliary catch STEP lever and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into the...
Page 670 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 671: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. ■ Front ■ Rear 2WD models AWD models SIENNA_OM_OM45483U_(U)
Page 672 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following precautions to reduce the possibility of death or serious injury: ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 673: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (P. 687) Brake fluid reservoir (P. 681) Engine oil filler cap (P. 675) Fuse box (P. 711) Engine oil level dipstick Battery (P. 683) (P. 674) Electric cooling fans Engine coolant reservoir Condenser (P.
Page 674 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP Park the vehicle on level ground. After warming up the engine and turning it off, wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 675 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 676 4-3. Do-it-yourself maintenance ■ Engine oil consumption A certain amount of engine oil will be consumed while driving. In the follow- ing situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals. ●...
Page 677 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 678 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir caps drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. SIENNA_OM_OM45483U_(U)
Page 679 4-3. Do-it-yourself maintenance CAUTION ■ When the engine is hot Do not remove the engine coolant reservoir cap. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns. NOTICE ■...
Page 680 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. CAUTION ■ When the engine is hot Do not touch the radiator or condenser as they may be hot and cause seri- ous injuries, such as burns.
Page 681 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. “MAX” “MIN” ■ Adding fluid Lift the cover off. Make sure to check the fluid type and prepare the necessary item. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Item...
Page 682 4-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
Page 683 4-3. Do-it-yourself maintenance Battery Check the battery as follows: ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive.
Page 684 Make sure to turn off the power before disconnecting the battery. Take extra care when connecting the battery if the “ENGINE START STOP” switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. ■...
Page 685 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 686 4-3. Do-it-yourself maintenance CAUTION ■ How to recharge the battery Only perform a slow charge (5 A or less). The battery may explode if charged at a quicker rate. ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention.
Page 687 4-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the low washer fluid warning light comes on, the washer tank may be empty. Add washer fluid. CAUTION ■ When refilling washer fluid Do not refill washer fluid when the engine is hot or running, as washer fluid contains alcohol and may catch fire if spilled on the engine etc.
Page 688: Tires
4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. ■ Checking tires New tread Treadwear indicator Worn tread The location of treadwear indicators is shown by the “TWI” or “ ” marks, etc., molded on the sidewall of each tire.
Page 689 4-3. Do-it-yourself maintenance ■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection. ■...
Page 690 Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (P. 692) Initializing the tire pressure warning system When the tire size is changed, the tire pressure warning system must be initialized.
Page 691 4-3. Do-it-yourself maintenance STEP Turn the engine switch to the “ON” position (vehicles without a smart key system) or “ENGINE START STOP” switch to IGNI- TION ON mode (vehicles with a smart key system). Press and hold the tire pressure STEP warning reset switch until the tire pressure warning light blinks...
Page 692 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 693 4-3. Do-it-yourself maintenance ■ Tire life Any tire over 6 years old must be checked by a qualified technician even if it has seldom or never been used or damage is not obvious. ■ Routine tire inflation pressure checks The tire pressure warning system does not replace routine tire inflation pressure checks.
Page 694 4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 695 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings has not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 696 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID:GQ4-45T FCC ID:GQ4-37R For vehicles sold in the U.S.A. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 697 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 698 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 699: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. ( P. 807 SIENNA_OM_OM45483U_(U)
Page 700 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the gauge gradations. STEP If the tire inflation pressure is not at the recommended lev- els, adjust the pressure.
Page 701 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 702 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ●...
Page 703: Wheels
● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 704 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning valves and trans- mitters must be installed.
Page 705 Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 706: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP Turn the engine switch (vehicles without a smart key sys- tem) or “ENGINE START STOP” switch (vehicles with a smart key system) off.
Page 707 4-3. Do-it-yourself maintenance Remove the filter. STEP The“UP” marks shown on the filter should be pointing up. ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, more frequent cleaning or early replacement may be required.
Page 708: Wireless Remote Control/Electronic Key Battery
4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver ● Lithium battery CR2032 ■ Replacing the battery (vehicles without a smart key system) Remove the cover using a STEP coin protected with tape etc.
Page 709 4-3. Do-it-yourself maintenance ■ Replacing the battery (vehicles with a smart key system) Take out the mechanical key. STEP Remove the cover. STEP To prevent damage to the key, cover the tip of the screwdriver with a rag. Remove the depleted battery. STEP Insert a new battery with the “+”...
Page 710 4-3. Do-it-yourself maintenance ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appli- ance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer. ●...
Page 711: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles without a smart key system Turn the engine switch off. Vehicles with a smart key system Turn the “ENGINE START STOP”...
Page 712 4-3. Do-it-yourself maintenance STEP After a system failure, see “Fuse layout and amperage rat- ings” (P. 714) for details about which fuse to check. Take out the pullout tool. STEP Only type A fuses can be removed using the pullout tool. STEP Check if the fuse has blown.
Page 713 4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer. Type E Normal fuse Blown fuse Contact your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 714 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit H-LP LVL 7.5 A Headlight leveling system PCS (Pre-collision system), DSS1 7.5 A dynamic radar cruise control sys- Starting system, multiport fuel ST NO.2 7.5 A injection system/sequential multi- port fuel injection system H-LP LH...
Page 715 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ 7.5 A sequential multiport fuel injection system, automatic transaxle Multiport fuel injection system/ EFI NO.2 10 A sequential multiport fuel injection system H-LP RH HI 10 A Right-hand headlight (high beam) H-LP LH HI 10 A Left-hand headlight (high beam)
Page 716 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 60 A Electric cooling fans Turn signal lights, gauges and 15 A meters 15 A Rear seat entertainment system Outside rear view mirror control, MIRROR 10 A outside rear view mirror heaters 30 A Audio system Vehicle dynamics integrated man- VSC NO.2...
Page 717 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Charging system, horn, left-hand headlight (low beam), right-hand headlight (low beam), fog light, out- 140 A side rear view mirror heaters, rear window defoggers, windshield wiper de-icer RAD NO.1 15 A Audio system Vanity lights, personal/interior lights, personal lights, engine switch light, rear ceiling lights, door DOME...
Page 718 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ 25 A sequential multiport fuel injection system, “IG NO.2” and “IG2” fuses ECU-B NO.2 7.5 A Air conditioning system Multiplex communication system, AM2 NO.2 7.5 A starting system Multiport fuel injection system/ sequential multiport fuel injection EFI NO.1 25 A...
Page 719 4-3. Do-it-yourself maintenance ■ Under the driver’s side instrument panel Fuse Ampere Circuit P/OUTLET 15 A Power outlets Audio system, navigation system, RAD NO.2 7.5 A rear seat entertainment system Main body ECU, clock, shift lock system, power rear view mirror ECU-ACC 10 A control, multiplex communication...
Page 720 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiplex communication system, stop lights, navigation system, vehicle stability control system, Active Torque Control 4WD, intui- tive parking assist, auto anti-glare ECU-IG NO.1 10 A inside rear view mirror, pre-collision seat belt, outside rear view mirror, seat heater, TPMS, yaw rate &...
Page 721 4-3. Do-it-yourself maintenance Fuse Ampere Circuit PSD LH 25 A Power sliding door (left-side) 7.5 A Active Torque Control 4WD 10 A Starting system Gauges and meters, multi informa- GAUGE NO.2 7.5 A tion display Automatic transaxle, multiport fuel injection system/sequential multi- port fuel injection system, SRS air- 7.5 A bag system, front passenger...
Page 722 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Tail lights, trailer lights (tail lights), TAIL 10 A license plate light, rear combination lights Windshield wiper and rear window WIP ECU 7.5 A wiper P/VENT 15 A Power quarter windows 10 A Automatic High Beam 30 A Windshield wiper WASHER...
Page 723 The fuses are designed to blow, protecting the wiring harness from damage. ■ When replacing light bulbs Toyota recommends that you use genuine Toyota products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable.
Page 724: Light Bulbs
You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 725 4-3. Do-it-yourself maintenance ■ Rear bulb locations Tail light Rear turn signal light License plate lights Back-up light Replacing light bulbs ■ Headlight low beams (halogen bulb) STEP For left side only: Open the fuse box cover. (P. 711) Unplug connector while STEP...
Page 726 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. ■ Headlight high beams and daytime running lights STEP For left side only: Open the fuse box cover. (P. 711) Turn the bulb base counterclock- STEP wise. Unplug connector while STEP pushing the lock release.
Page 727 4-3. Do-it-yourself maintenance ■ Front fog lights (if equipped) Remove the engine under cover STEP bolt and pull down the engine under cover. Unplug connector while STEP pushing the lock release. Turn the bulb base counterclock- STEP wise. SIENNA_OM_OM45483U_(U)
Page 728 4-3. Do-it-yourself maintenance ■ Front turn signal/parking and front side marker lights STEP For left side only: Open the fuse box cover. (P. 711) Vehicles without discharge headlights Turn the bulb base counterclock- STEP wise. Vehicles with discharge headlights STEP Remove the light bulb.
Page 729 4-3. Do-it-yourself maintenance ■ Rear turn signal lights Remove the securing bolts and STEP remove the unit. Turn the bulb base counterclock- STEP wise. Gasket Remove the light bulb. STEP SIENNA_OM_OM45483U_(U)
Page 730 4-3. Do-it-yourself maintenance ■ Tail and back-up lights Remove the back door trim STEP board. Turn the bulb base counterclock- STEP wise. Tail light Back-up light Remove the light bulb. STEP Tail light Back-up light SIENNA_OM_OM45483U_(U)
Page 731 4-3. Do-it-yourself maintenance ■ License plate lights Remove the back door trim STEP board. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP SIENNA_OM_OM45483U_(U)
Page 732 The stop/tail, side turn signal light, rear side marker lights and high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■...
Page 733 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 734 When replacing the rear turn signal lights Inspect the gasket for any damage (rip, tear, hole, etc.). If there is any dam- age, please contact your Toyota dealer and have the gasket replaced. Improper installation of the gasket may result in water entering the rear light unit.
Page 735 When trouble arises 5-1. Essential information 5-2. Steps to take in an emergency Emergency flashers ..736 If a warning light turns If your vehicle needs on or a warning buzzer to be towed ....737 sounds......743 If you think something If a warning message is is wrong ......
Page 736: Essential Information Emergency Flashers
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running.
Page 737: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a wheel-lift type truck or flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 738 5-1. Essential information Towing with a sling-type truck Do not tow with a sling type truck to prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. SIENNA_OM_OM45483U_(U)
Page 739 5-1. Essential information From the front (AWD models) Use a towing dolly under the rear wheels. From the rear Use a towing dolly under the front wheels. Using a flatbed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45.
Page 740 5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transaxle and Active Torque Control 4WD system (AWD models) when towing using a wheel-lift type truck 2WD models: Never tow this vehicle from...
Page 741: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 742: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 743: Steps To Take In An Emergency If A Warning Light Turns On Or A Warning Buzzer Sounds
If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
Page 744 Have the vehicle inspected immediately. Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 745 5-2. Steps to take in an emergency Warning light Warning light/Details “ABS” warning light (U.S.A.) Indicates a malfunction in: • The ABS; or • The brake assist system (Canada) Electric power steering system warning light (warning buzzer) Indicates a malfunction in the EPS (Electric Power Steer- ing) system Pre-collision system warning light (if equipped) Indicates a malfunction in the pre-collision system...
Page 746 5-2. Steps to take in an emergency Warning light Warning light/Details Automatic High Beam indicator light (if equipped) Indicates a malfunction in the Automatic High Beam sys- tem (P. 277) (Flashes) Cruise control indicator light (if equipped) Indicates a malfunction in the cruise control system (P.
Page 747 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light (warning buzzer) Check that all the doors are Indicates that a door is not closed.
Page 748 • Flat tire (P. 759, 761) pressure is adjusted, have the system checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer.
Page 749 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Maintenance required reminder light Indicates that mainte- nance is requires accord- ing to the driven distance on the maintenance schedule. Illuminates for about 3 sec- onds and then flashes for about 15 seconds approxi- If necessary, perform main- mately 4500 miles...
Page 750 When the light comes on: Malfunction in the Active Have the system checked Torque Control 4WD sys- by your Toyota dealer. tem. :Open door warning buzzer: A buzzer will sound if the vehicle reaches a speed of 3 mph (5 km/h) with any door open.
Page 751 5-2. Steps to take in an emergency ■ SRS warning light This warning light system monitors the airbag sensor assembly, front impact sensors, side impact sensors (front door), side impact sensors (rear), driver’s seat position sensor, driver’s seat belt buckle switch, front passen- ger occupant classification system (ECU and sensors), “AIR BAG ON”...
Page 752 The malfunction indicator lamp will go off after taking several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. ■ When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level.
Page 753 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 754 If the tire pressure warning light frequently comes on after blinking 1 minute when the “ENGINE START STOP” switch is turned to IGNITION ON mode, have it checked by your Toyota dealer. ■ Customization that can be configured at Toyota dealer The vehicle speed linked seat belt reminder buzzer can be disabled.
Page 755 Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest Toyota dealer. • Avoid abrupt maneuvering and braking. If the vehicle tires deterio- rate, you could lose control of the steering wheel or the brakes.
Page 756 5-2. Steps to take in an emergency CAUTION ■ If a blowout or sudden air leakage should occur The tire pressure warning system may not activate immediately. ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 757 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
Page 758: If A Warning Message Is Displayed
A buzzer may sound when a warning message is shown on the multi-information display. ■ If the warning message is shown again after its correction procedure has been performed Contact your Toyota dealer as soon as possible.  : If equipped SIENNA_OM_OM45483U_(U)
Page 759: If You Have A Flat Tire (Vehicles With Run-Flat Tires)
Run-flat tires (A “RFT” or “DSST” mark is molded on the sidewall) Take your vehicle to the near- est Toyota dealer or autho- rized tire dealer as soon as possible if any tire goes flat. The vehicle can be driven for...
Page 760 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 761: If You Have A Flat Tire (Vehicles With Standard Tires)
5-2. Steps to take in an emergency If you have a flat tire (vehicles with standard tires) Remove the flat tire and replace it with the spare tire provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ●...
Page 762 5-2. Steps to take in an emergency Taking out the jack and tools Remove the cover. STEP Remove the adapter socket. STEP Remove the jack. STEP SIENNA_OM_OM45483U_(U)
Page 763 5-2. Steps to take in an emergency Remove the wheel nut wrench. STEP Taking out the spare tire STEP Slide the front passenger’s seat to the frontmost lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle.
Page 764 5-2. Steps to take in an emergency Attach the adapter socket over STEP the spare tire clamp bolt. Connect the jack handle and the adapter socket. Turn the jack handle. The tire will be lowered com- pletely to the ground. Take the spare tire out from STEP underneath...
Page 765 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 766 5-2. Steps to take in an emergency Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and STEP the tire.
Page 767 5-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 768 5-2. Steps to take in an emergency Firmly tighten each wheel nut STEP two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP Stow the flat tire, tire jack and all tools. Stowing the flat tire Remove clasps and strap.
Page 769 5-2. Steps to take in an emergency Clip clasp to outboard hook. STEP Clip other clasp to center or STEP opposite hook location. Pull strap to tighten and secure STEP tire. ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY”...
Page 770 5-2. Steps to take in an emergency ■ Jack point guide The jack point guides are located on the side of rocker moulding. They indi- cate the jack point positions. ■ After completing the tire change The tire pressure warning system must be reset. (P. 690) ■...
Page 771 5-2. Steps to take in an emergency CAUTION ■ When using the compact spare tire ● Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ●...
Page 772 5-2. Steps to take in an emergency CAUTION ■ Speed limit when using the compact spare tire Do not drive at speeds in excess of 50 mph (80 km/h) when a compact spare tire is installed on the vehicle. The compact spare tire is not designed for driving at high speeds. Failure to observe this precaution may lead to an accident causing death or seri- ous injury.
Page 773 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered end facing inward.
Page 774 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire for vehicles with power sliding door and/or power back door In cases such as when replacing tires, make sure to turn off the power sliding door main switch (P. 70) and/or the power back door main switch (P.
Page 775 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 776: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting procedures are being followed (P. 228, 231), consider each of the following points: ■ The engine will not start even though the starter motor operates normally.
Page 777 ● There may be a malfunction in the steering lock system (vehi- cle with a smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system) When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP”...
Page 778: If The Shift Lever Cannot Be Shifted From P
(a system to pre- vent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to...
Page 779 5-2. Steps to take in an emergency ■ If the beep sounds continuously when the shift lever is shifted from P (vehicles with an AUTO ACCESS SEAT) The AUTO ACCESS SEAT may not be locked in place. For details, refer to “AUTO ACCESS SEAT OWNER’S MANUAL”. SIENNA_OM_OM45483U_(U)
Page 780: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart key system, bring a master key and the key number stamped on the key number plate.
Page 781: If The Electronic Key Does Not Operate Properly
5-2. Steps to take in an emergency  If the electronic key does not operate properly For vehicles with a smart key system: If communication between the electronic key and vehicle is interrupted (P. 36) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control cannot be used.
Page 782 5-2. Steps to take in an emergency Starting the engine STEP Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. An alarm will sound to indicate that the start function cannot detect the electronic key that is touched to the “ENGINE START...
Page 783 5-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the “ENGINE START STOP” switch as you normally do when stopping the engine. ■ Replacing the key battery As this above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery depletes.
Page 784: If The Battery Is Discharged
The following procedures may be used to start the engine if the vehi- cle’s battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your vehicle by follow- ing the steps below.
Page 785 5-2. Steps to take in an emergency STEP Connect the jumper cables according to the following pro- cedures: Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the clamp at the other end of the negative cable to a solid, stationary, unpainted metallic point away from the battery and any moving parts, as shown in the illustration.
Page 786 STEP To install the engine cover, conduct the removal procedure in reverse. After installing, check that the fixed pins are inserted securely. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. SIENNA_OM_OM45483U_(U)
Page 787 5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is off. ●...
Page 788 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
Page 789 5-2. Steps to take in an emergency NOTICE ■ When handling jumper cables When connecting the jumper cables, ensure that they do not become entan- gled in the cooling fans or belt. ■ To prevent damage to the engine cover ●...
Page 790: If Your Vehicle Overheats
Carefully lift the hood. After the engine has cooled STEP STEP down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 791 (The fans may not operate in freezing temperatures.) STEP If the fans are not operating: Stop the engine immediately and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer. SIENNA_OM_OM45483U_(U)
Page 792 5-2. Steps to take in an emergency CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, caus- ing serious injuries such as burns.
Page 793: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and shift the shift lever to P.
Page 794 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transaxle and other components ● Avoid spinning the wheels and pressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
Page 795: If Your Vehicle Has To Be Stopped In An Emergency
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly...
Page 796 5-2. Steps to take in an emergency Vehicles with a smart key sys- STEP tem: To stop the engine, press and hold the “ENGINE START STOP” switch for 2 consecu- tive seconds or more, or press it briefly 3 times or more in Press and hold for 2 seconds or more succession.
Page 797 Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.) ..798 Fuel information ....810 Tire information ....814 6-2. Customization Customizable features ..828 6-3. Initialization Items to initialize ....836 SIENNA_OM_OM45483U_(U)
Page 798: 6-1. Specifications
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 200.2 in. (5085 mm) Overall width 78.1 in. (1985 mm) GSL30L-PRTSKA 68.7 in. (1745 mm) Overall models Others 68.9 in. (1750 mm) height AWD models 69.5 in. (1765 mm) Wheelbase 119.3 in.
Page 799 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 800 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. Engine Model 3.5L 6-cylinder (2GR-FE) Type 6-cylinder V type, 4-cycle, gasoline 3.70  3.27 in. (94.0  83.0 mm) Bore and stroke Displacement 210.9 cu.in. (3456 cm Drive belt tension Automatic adjustment Valve clearance...
Page 801 ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil...
Page 802 6-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 803 With towing package 11.7 qt. (11.1 L, 9.8 Imp.qt.) Coolant type Use either of the following. • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol-based non-sili- cate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 804 Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission. SIENNA_OM_OM45483U_(U)
Page 805 Oil type and viscosity 75W-85 GL-5 or equivalent Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Page 806 6-1. Specifications Brakes Pedal clearance 2.99 in. (76 mm) 0.04  0.24 in. (1  6 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) 3  6 clicks Parking brake pedal travel Fluid type SAE J1703 or FMVSS No.116 DOT 3...
Page 807 6-1. Specifications Tires and wheels 17-inch tires Tire size P235/60R17 100T Tire inflation pressure Front: 35 psi (240 kPa, 2.4 kgf/cm or bar) (Recommended cold tire Rear: 35 psi (240 kPa, 2.4 kgf/cm or bar) inflation pressure) Wheel size 17 x 7J Wheel nut torque 76 ft•lbf (103 N•m, 10.5 kgf•m) 18-inch tires...
Page 808 6-1. Specifications Compact spare tire (2WD models) Tire size T155/80R17 101M Tire inflation pressure (Recommended cold tire 60 psi (420 kPa, 4.2 kgf/cm or bar) inflation pressure) Wheel size 17 x 4T Wheel nut torque 76 ft•lbf (103 N•m, 10.5 kgf•m) SIENNA_OM_OM45483U_(U)
Page 809 6-1. Specifications Light bulbs Light bulbs Bulb No. Type Headlights (low beam)  Discharge bulbs  Halogen bulbs Headlights (high beam) 9005  Front fog lights Front turn signal/parking and 3457NAK 28/8 Exterior front side marker lights Rear turn signal lights WY21W Tail lights Back-up lights...
Page 810: Fuel Information
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■...
Page 811 EPA’s lowest additives concen- tration program. ● Toyota strongly recommends the use of Top Tier Detergent Gasoline. For more information on Top Tier Detergent Gasoline and a list of marketers, please go to the official website www.toptiergas.com.
Page 812 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methyl- cyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 813 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s catalytic converters causing the emission control system to malfunction.
Page 814: Tire Information
6-1. Specifications Tire information Typical tire symbols Run-flat tire or standard tire Compact spare tire Tire size (P. 817) DOT and Tire Identification Number (TIN) (P. 816) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (P.
Page 815 6-1. Specifications Run-flat tire (RFT) or standard tire (P. 759) This vehicle can be equipped with either run-flat tires (RFT) or stan- dard tires. An “RFT” or “DSST” mark is molded on the sidewall of the run-flat tire. Tire ply composition and materials Plies are layers of rubber-coated parallel cords.
Page 816 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identifica- tion mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
Page 817 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 or 3 digits) Speed symbol...
Page 818 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 819 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government course as a tire graded 100.
Page 820 6-1. Specifications ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, represent- ing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a speci- fied indoor laboratory test wheel.
Page 821 6-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which a Maximum inflation...
Page 822 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 823 6-1. Specifications Tire related term Meaning The load on an individual tire that is determined by distributing to each axle its share of curb Vehicle normal load weight, accessory weight, and normal occu- on the tire pant weight (distributed in accordance with Table 1 below), and dividing by two The surface area of the rim not covered by the...
Page 824 6-1. Specifications Tire related term Meaning A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that encloses the rim flanges inside the air cavity of the tire A tire designed to operate at higher loads and...
Page 825 6-1. Specifications Tire related term Meaning Maximum permissible The maximum cold inflation pressure to which inflation pressure a tire may be inflated The rim on which a tire is fitted for physical Measuring rim dimension requirements Any parting at any junction of tread, sidewall, or Open splice innerliner that extends to cord material Outer diameter...
Page 826 6-1. Specifications Tire related term Meaning A tire designed to operate at higher loads and Reinforced tire at higher inflation pressures than the corre- sponding standard tire The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- Section width vations due to labeling, decoration, or protec- tive bands...
Page 827 6-1. Specifications Tire related term Meaning The projections within the principal grooves Treadwear indicators designed to give a visual indication of the (TWI) degrees of wear of the tread The fixture used to hold the wheel and tire Wheel-holding fixture assembly securely during testing : Table 1 ...
Page 828: Customization Customizable Features
Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customized Item Function Default setting setting Drivers door...
Page 829 6-2. Customization Customized Item Function Default setting setting Smart key system Open door warning function wireless (when locking the vehi- remote cle) control  P. 36  53) Wireless remote control Level 1 to 6 Operation signal Level 7 (Buzzer volume) Panic function Wireless remote...
Page 830 6-2. Customization Customized Item Function Default setting setting Drivers door unlocked in one All doors Unlocking using a key step, all doors unlocked in one unlocked in two step steps Speed-detecting auto- matic door lock func- Door lock tion  P. 60) Opening drivers door unlocks all doors Shifting gears to P...
Page 831 6-2. Customization Customized Item Function Default setting setting Operation signal Power (buzzer) sliding door Press twice Opening and closing  P. 67) Press and hold operation One short press Time elapsed before 0 second headlights automati- 60 seconds 30 seconds cally turn off after doors Automatic 90 seconds...
Page 832 6-2. Customization Customized Item Function Default setting setting 7.5 seconds Time elapsed before 15 seconds lights turn off 30 seconds Operation when the doors are unlocked Operation after the engine switch is turned Illumination to the “LOCK” position  P. 582) (vehicles without a smart key system) or the “ENGINE START...
Page 833 6-2. Customization Customizing the features by using the multi-information display Press the “SETUP” button while STEP the vehicle is stopped. The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 20 seconds, the display will return to the previous screen.
Page 834 6-2. Customization Choose a desired setting by STEP pressing the “INFO” or “SETUP” button, then press the “SELECT RESET” button to select. If any settings are changed, the display will revert to the previous screen. The illustration assumes that “Auto Locking” was chosen in STEP The current setting is indicated by yellow text.
Page 835 6-2. Customization Select “Default Settings” STEP pressing the “INFO” or “SETUP” button, and press the “SELECT RESET” button. If you select “Exit” and press the “SELECT RESET” button, the display will revert to the previous screen. Select “Yes” by pressing the STEP “INFO”...
Page 836: Initialization Items To Initialize
6-3. Initialization Items to initialize The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle. Item When to initialize Reference Power sliding door After reconnecting or changing the P.
Page 837: For Owners
For owners Reporting safety defects for U.S. owners ....838 Seat belt instructions for Canadian owners (in French) ..... 839 SRS airbag instructions for Canadian owners (in French) ..... 841 SIENNA_OM_OM45483U_(U)
Page 838: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 839: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. SIENNA_OM_OM45483U_(U)
Page 840 SIENNA_OM_OM45483U_(U)
Page 841: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. SIENNA_OM_OM45483U_(U)
Page 842 SIENNA_OM_OM45483U_(U)
Page 843 SIENNA_OM_OM45483U_(U)
Page 844 SIENNA_OM_OM45483U_(U)
Page 845 SIENNA_OM_OM45483U_(U)
Page 846 SIENNA_OM_OM45483U_(U)
Page 847 SIENNA_OM_OM45483U_(U)
Page 848 SIENNA_OM_OM45483U_(U)
Page 849 SIENNA_OM_OM45483U_(U)
Page 850 SIENNA_OM_OM45483U_(U)
Page 851 SIENNA_OM_OM45483U_(U)
Page 852 SIENNA_OM_OM45483U_(U)
Page 853 Index Abbreviation list ..... 854 Alphabetical index....856 What to do if......867 For details of equipment related to the navigation system and touch screen, such as the audio systems, refer to the “Navigation System Owner’s Manual”. For details about AUTO ACCESS SEAT, refer to the “AUTO ACCESS SEAT Owner’s Manual”.
Page 854: Abbreviation List
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2 Wheel Drive Air Conditioning Anti-lock Brake System Accessory AI-SHIFT Artificial Intelligence Shift control Automatic Locking Retractor Average All Wheel Drive Blind Spot Monitor Child Restraint System Economy/Ecology Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering English/U.S.
Page 855 Abbreviation list ABBREVIATIONS MEANING Emission inspection and maintenance LATCH Lower Anchors and Tethers for Children Light Emitting Diode Maximum Minimum Methylcyclopentadienyl Manganese Tricarbonyl M + S Mud and Snow MTBE Methyl Tertiary Butyl Ether On Board Diagnostics Pre-Collision System Run-Flat Tire Supplemental Restraint System Tire Identification Number TPMS...
Page 856: Alphabetical Index
Alphabetical index Alphabetical index A/C.....396, 404, 414, 417 Alarm......... 163 ABS ...........331 Antenna ......434, 483 Active head restraint ....98 Anti-lock brake system ... 331 Active Torque Control Armrest ........616 4WD system ......332 Assist grips ......618 Air conditioning filter....706 Audio input.......
Page 857 Alphabetical index Back-up lights Child restraint system Replacing light bulbs .... 724 Booster seats, definition..191 Wattage ........ 809 Booster seats, installation ..196 Back door Convertible seats, Back door ....... 82 definition ......191 Wireless remote control..53 Convertible seats, Battery installation......196 Checking ......
Page 858 Alphabetical index Cleaning Daytime running light Exterior........648 system ........274 Interior ........653 Defogger Seat belts ......654 Rear window ......421 Clock .........256, 608 Side mirrors......421 Compass........634 Dimension ........ 798 Condenser ........680 Dinghy towing ......393 Console box ......591 Display Conversation mirror ....609 Dynamic radar cruise Cooling system control.........
Page 859 Alphabetical index Electric power steering... 331 Engine Electronic key Accessory mode....233 If your electronic key Compartment ......673 does not operate Engine switch ....228, 231 properly ......781 Hood........669 Emergency, in case of How to start the If the back door opener is engine ......228, 231 inoperative ......
Page 860 Alphabetical index Floor mat........622 Garage door opener ....626 Fluid Gauges........246 Brake........681 Glove box ......... 589 Washer........687 Grocery bag hooks ....620 Fog lights Replacing light bulbs .....724 Hands-free system Switch........284 (for cellular phone)....545 Wattage.........809 Head restraints Front fog lights Adjusting ......
Page 861 Alphabetical index I/M test........664 License plate lights Identification Replacing light bulbs .....724 Engine ........799 Wattage.........809 Vehicle........799 Light bulbs Ignition switch ....228, 231 Replacing ......724 Illuminated entry system ..587 Wattage.........809 Indicator lights ......249 Lights Initialization Door courtesy lights ....582 Items to initialize....
Page 862 Alphabetical index Maintenance Parking assist sensors.... 318 Do-it-yourself Parking brake ......244 maintenance .......665 Parking lights General maintenance....660 Replacing light bulbs..... 724 Maintenance data....798 Switch ........270 Maintenance requirements..657 Wattage......... 809 Reset the maintenance PCS ........... 340 data........658 Personal lights Meter Switch ........
Page 863 Alphabetical index Rear turn signal lights Seat heaters......614 Replacing light bulbs .... 724 Seating capacity.......368 Switch........243 Seats Wattage ........ 809 Adjustment ......95, 100 Rear view mirror Adjustment Compass ......634 precaution .....99, 117 Rear window defogger.... 421 Child seats/child restraint Rear window wiper....
Page 864 Alphabetical index Spare tire Tachometer ......246 Inflation pressure....808 Tail lights Storage location ....761 Replacing light bulbs..... 724 Spark plug ........803 Switch ........270 Specifications......798 Wattage......... 809 Speech command switch ..551 Talk switch ....... 551 Speedometer ......246 Telephone switch..... 551 Steering wheel Theft deterrent system Adjustment ......138...
Page 865 Alphabetical index Towing Warning buzzers Dinghy towing....... 393 Brake system ......743 Trailer towing......373 Open door ......747 Traction control....... 331 Seat belt reminder....747 TRAC ........331 Warning lights Trailer towing......373 Active Torque Control 4WD Trip information display ..256 system ........750 Trip meter.........
Page 866 Alphabetical index Weight Cargo capacity ......360 Load limits ......368 Weight ........798 Wheels ........703 Window glasses ....145, 149 Window lock switch....145 Windows Power windows .....145, 149 Rear window defogger ..421 Washer......286, 294 Windshield wiper de-icer..421 Windshield wipers ....286 Wireless remote control key Replacing the battery ....708 Wireless remote control ..53 WMA disc........447...
Page 867: What To Do If
What to do if... What to do if... P. 759/ If you have a flat tire A tire punctures P. 761 P. 776 If the engine will not start The engine does not start P. 160 Engine immobilizer system P. 784 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be...
Page 868 What to do if... If a warning light turns on or a A warning light or indicator light P. 743 warning buzzer sounds... comes on Instrument cluster Center display SIENNA_OM_OM45483U_(U)
Page 869: Warning Lights
What to do if... ■Warning lights Brake system warning Open door warning light light P. 747 Driver’s seat belt reminder light P. 743 P. 747 Front passenger’s seat belt Charging system reminder light warning light P. 744 P. 747 Third seat warning light Low engine oil pressure warning light P.
Page 870 What to do if... SIENNA_OM_OM45483U_(U)
Page 871 What to do if... SIENNA_OM_OM45483U_(U)
Page 872: Gas Station Information
(L, Imp.qt.)  (Drain and refill Without filter 6.0 (5.7, 5.0) reference) With filter 6.4 (6.1, 5.4) Toyota Genuine Motor Oil or equivalent Oil grade ILSAC GF-5 multigrade engine oil Engine oil type Recommended oil viscosity: 0W-20 P. 801 SIENNA_OM_OM45483U_(U)

Toyota 2014 Sienna Manual

1 Before Driving

1-1. Key Information

1-2. Opening, Closing and Locking the Doors

Adjustable Components (Seats, Mirrors, Steering Wheel)

Opening and Closing the Windows and Moon Roof Power Windows

1-5. Refueling

Theft Deterrent System Engine Immobilizer System

Safety Information Correct Driving Posture

2 When Driving

2-1. Driving Procedures

Instrument Cluster and Information Display Gauges and Meters

2-3. Operating the Lights and Wipers

Using Other Driving Systems Cruise Control

2-5. Driving Information

3 Interior Features

3-1. Using the Air Conditioning System and Defogger

3-2. Using the Audio System

Using the Bluetooth

3-4. Using the Rear Audio System

Using the Hands-Free Phone System (for Cellular Phone)

3-6. Using the Interior Lights

3-7. Using the Storage Features

3-8. Other Interior Features

Maintenance Maintenance Requirements

Do-It-Yourself Maintenance Do-It-Yourself Service Precautions

Essential Information Emergency Flashers

Steps to Take in an Emergency if a Warning Light Turns on or a Warning Buzzer Sounds

6-1. Specifications

Customization Customizable Features

Initialization Items to Initialize

7 For Owners

Abbreviation List

Alphabetical Index

What to Do if

Quick Links

Related Manuals for Toyota 2014 Sienna

Summary of Contents for Toyota 2014 Sienna