2-1. Driving procedures
Turn signal lever
The turn signal lever can be used to show the following intentions
of the driver:
■
Turn signals can be operated when
The "POWER" switch is in ON mode.
■
If the indicators flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
■
If the turn signals stop flashing before a lane change has been per-
formed
Operate the lever again.
174
Right turn
Left turn
Lane change to the right
(move the lever partway
and release it)
The right hand signals will
flash 3 times.
Lane change to the left
(move the lever partway
and release it)
The left hand signals will flash
3 times.