Toyota Prius c 2014 Owner's Manual page 388

4-3. Do-it-yourself maintenance
Turn the engine switch to the "ON" position (vehicles without a
STEP 3
smart key system) or "POWER" switch to ON mode (vehicles
with a smart key system).
STEP STEP 4 4
Vehicles without a smart key system: Wait for a few minutes
STEP 5
with the engine switch in the "ON" position and then turn the
engine switch to the "ACC" or "LOCK" position.
Vehicles with a smart key system: Wait for a few minutes with
the "POWER" switch in ON mode and then turn the "POWER"
switch off.
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
■ When to replace your vehicle's tires
Tires should be replaced if:
● You have tire damage such as cuts, splits, cracks deep enough to
expose the fabric, and bulges indicating internal damage
● A tire goes flat repeatedly or cannot be properly repaired due to the
size or location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
386
Press and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.