Toyota Prius c 2014 Owner's Manual page 275

■
iPod functions
●
When an iPod is connected and the audio source is changed to iPod
mode, the iPod will resume play from the same point in which it was last
used.
●
Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it once again may resolve the problem.
●
While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle's audio system
instead.
■
iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner's Man-
ual.
■
Display
→P. 258
■
Error messages
"iPod ERROR":
"ERROR 3":
"ERROR 4":
"ERROR 5":
"ERROR 6":
"NO SONGS":
"NO PLAYLIST":
"UPDATE YOUR iPod": This indicates that the version of the iPod is not
This indicates that the data in the iPod cannot be read.
This indicates that the iPod may be malfunctioning.
This indicates that an over current error has occurred.
This indicates that an iPod communication error has
occurred.
This indicates that an authentication error has occurred.
This indicates that there is no music data in the iPod.
This indicates that some available songs are not found in
a selected playlist.
compatible. Upgrade your iPod software to the lat-
est version.
3-2. Using the audio system
3
273