Toyota Prius c 2014 Owner's Manual page 260

3-2. Using the audio system
Switching the display
Press
To return to the previous display, press
■
Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding
second or more will display the remaining characters.
A maximum of 64 characters can be displayed.
If is pressed for 1 second or more again, or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■
Error messages
"ERROR": This indicates a problem either in the CD or inside the player.
"CD CHECK": The CD may be dirty, damaged or inserted up-side down.
"WAIT": Operation has stopped due to a high temperature inside the
player. Wait for a while and then press
still cannot be played back, contact your Toyota dealer.
■
Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not be used.
■
CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the CD player is being used.
258
.
or (BACK).
for 1
. If the CD