Toyota Prius c 2014 Owner's Manual page 355

■
Reset the maintenance data (U.S.A. only)
After the required maintenance is performed according to the maintenance
schedule, please reset the maintenance data.
To reset the data, follow the procedures described below:
STEP 1 Vehicles without a smart key system
Switch the display to the odometer (→P. 190) and then turn the
engine switch off.
Vehicles with a smart key system
Switch the display to the odometer (→P. 190) and then turn the
"POWER" switch off.
STEP 2 Vehicles without a smart key system
Turn the engine switch to the "ON" position. The multi-information
display's initial screen will be displayed for a few seconds. While the
initial screen is being displayed, press the "TRIP" steering switch
(→P. 188) 3 times, pressing and holding the switch on the third
time.
Vehicles with a smart key system
Turn the "POWER" switch to ON mode. The multi-information dis-
play's initial screen will be displayed for a few seconds. While the
initial screen is being displayed, press the "TRIP" steering switch
(→P. 188) 3 times, pressing and holding the switch on the third
time.
STEP 3 Continue to press and hold the button until the trip meter displays
"000000".
■
Allow inspection and repairs to be performed by a Toyota dealer
●
Toyota technicians are well-trained specialists and are kept up to date
with the latest service information. They are well informed about the
operations of all systems on your vehicle.
●
Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly
take care of it.
4-2. Maintenance
353
4