Table of Contents
Advertisement
*Call AAA Rent-All at 225-291-1356 for assistance ordering parts*
Getting Started With Basic Techniques
Getting Started With Basic Techniques
Use a piece of scrap cardboard to practice these basic
spraying techniques before you begin spraying the sur-
face.
•
Hold gun 12 in. (30 cm) from surface and aim
straight at surface. Tilting gun to direct spray angle
causes an uneven finish.
12 in.
(30 cm)
even
finish
•
Flex wrist to keep gun pointed straight. Fanning gun
to direct spray at angle causes uneven finish.
even finish
16
thick
uneven
ti5585a
finish
thin
thin
thick
thin
ti2036a
Triggering Gun
Pull trigger after starting stroke. Release trigger before
end of stroke. Gun must be moving when trigger is
pulled and released.
Aiming Gun
Aim tip of gun at bottom edge of previous stroke, over-
lapping each stroke by half.
ti2038a
ti2037a
3A0248E
Advertisement
Table of Contents
