*Call AAA Rent-All at 225-291-1356 for assistance ordering parts*
Technical Data
Working pressure range
Electric motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, sprayer only
Weight, sprayer, hose & gun
Dimensions:
Length
Width
Height
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen (on suction tube)
Wetted parts, pump & hose
Wetted parts, gun
Generator requirement
Electrical power requirement
Storage temperature range
Operating temperature range
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in
pump.
Damage to plastic parts may result if impact occurs in low temperature conditions.
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
3A0248E
Project Painter Plus
3/4 in. internal thread (standard garden hose thread)
1/4 NPSM external thread
stainless steel, brass, leather, ultra-high molecular weight polyethylene
(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer
aluminum, brass, carbide, nylon, plated steel, stainless steel, UHMWPE, zinc
120 Vac, 60 Hz, 15A, 1 phase
-30° to 160°F (-35° to 71°C)
0-2800 psi
(0-19 MPa, 0-193 bar)
7.0A
(open frame, universal)
3/8
0.24 gpm (0.91 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
0.015 in. (0.38 mm)
10 lb (4.5 kg)
13.2 lb (5.9 kg)
13.8 in. (35.2 cm)
12.1 in. (30.7 cm)
13.8 in. (35.1 cm)
18 AWG, 3-wire,
6 ft (1.8 m)
35 mesh (450 micron)
1500 Watt minimum
40° to 115°F (4° to 46°C)
Technical Data
29