Table of Contents
Advertisement
*Call AAA Rent-All at 225-291-1356 for assistance ordering parts*
Component Identification - Project Painter Plus
Component Identification - Project Painter Plus
A
Airless spray gun
B
Power switch
C
Pressure control knob
C1 Setting Indicator
D
Pump fluid outlet fitting
G
Suction tube
H
Prime tube (with diffuser)
J
Prime/Spray valve
L
Inlet screen
M Paint hose
N
Handle
Q
Tip guard
R
Reversible spray tip
Gun trigger safety lever
S
(page 10)
T
Gun fluid inlet fitting
U
Power Flush attachment
V
Gun fluid filter
W Pail Hook
X
Power Cord
8
Dispenses fluid.
Turns sprayer ON and OFF.
Increases (clockwise) and decreases (counter-clockwise) fluid pressure in pump,
hose, and spray gun.
To select function, align symbol on pressure control knob with setting
indicator, page 14.
Threaded connection for paint hose.
Draws fluid from paint pail into pump.
Drains fluid in system during priming and pressure relief.
•
In PRIME position directs fluid to prime tube.
•
In SPRAY position directs pressurized fluid to paint hose.
•
Automatically relieves system pressure in overpressure situations.
Prevents debris from entering pump.
Transports high-pressure fluid from pump to spray gun.
Used to help transport sprayer.
Reduces risk of fluid injection injury.
•
Atomizes fluid being sprayed, forms spray pattern and controls fluid flow
according to hole size.
•
Reverse unclogs plugged tips without disassembly.
Prevents accidental triggering of spray gun.
Threaded connection for paint hose.
Connects garden hose to suction tube for power flushing water-base
fluids.
Filters fluid entering spray gun to reduce tip clogs.
Holds material pail.
Supplies Project Painter Plus with electricity.
3A0248E
Advertisement
Table of Contents
