Table of Contents
Advertisement
Step 2 : Mount the Machine
WARNING
CAUTION
Procedure
Place the machine on the stand.
Mount the machine aligning the holes on the under side of the machine with the projections on the top
of the stand.
Loosely tighten the bolts (in the 8 locations).
Fully tighten all the loosely-tightened bolts.
Washers
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Unpacking and installation must be carried out by six or more persons.
Otherwise the machine or the stand may fall, resulting in injury.
Under side
of the ma-
chine
4 places
Main unit
Align with the fittings on the stand.
4 places
3. Assembling and Installing
Washers
27
Advertisement
Table of Contents
