Fax
Adjusting the fax darkness
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
> Fax > Darkness
For non-touch-screen printer models, press
3
Select a setting.
4
Fax the document.
Printing a fax log
1
From the control panel, navigate to:
Settings > Reports > Fax
For non-touch-screen printer models, press
2
Select Fax Job Log or Fax Call Log.
Blocking junk faxes
1
From the home screen, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls
For non-touch-screen printer models, press
2
Set Block No Name Fax to On.
Holding a fax
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
3
Select a mode.
4
Apply the changes.
to navigate through the settings.
to navigate through the settings.
to navigate through the settings.
52