Creating A Cloud Connector Profile; Printing The Menu Settings Page - Lexmark MB2236 User Manual

Set up, install, and configure
Creating a Cloud Connector profile
We recommend logging in to the printer before you create a profile. To enable a login method, see the
Embedded Web Server
1
From the home screen, touch Cloud Connector.
2
Select a cloud service provider.
3
Touch Create or
4
Type a unique profile name.
5
If necessary, enter a PIN.
Note: When using the printer as guest, protect the profile with a PIN.
6
Touch OK, and then take note of the authorization code.
Note: The authorization code is valid only for 24 hours.
7
Open a web browser, and then go to https://lexmark.cloud-connect.co.
8
Click Next, and then accept the Terms of Use.
9
Enter the authorization code, and then click Connect.
10
Log in to your cloud service provider account.
11
Grant permissions.
Note: To complete the authorization process, open the profile within 72 hours.

Printing the Menu Settings Page

From the control panel, navigate to:
Settings > Reports > Menu Settings Page
For non‑touch‑screen printer models, press
‑
Security Admin Guide.
.
to navigate through the settings.
36