Lexmark MB2236 User Manual page 66

Use printer menus
Menu item
Device Operations
Quiet Mode
On
Off*
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
On*
Off
Scanner Configuration
Scanner Manual Registration
Print Quick Test
Scanner Configuration
Scanner Manual Registration
Front ADF Registration
Flatbed Registration
Scanner Configuration
Edge Erase
ADF Edge Erase
0–6 (3*)
Flatbed Edge Erase
0–6 (3*)
Scanner Configuration
Disable Scanner
Enabled*
Disabled
ADF Disabled
Scanner Configuration
Tiff Byte Order
CPU Endianness*
Little Endian
Big Endian
Scanner Configuration
Exact Tiff Rows Per Strip
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to reduce the amount of noise that it makes
when printing.
Note: This setting slows down the overall performance of the
printer.
Erase all custom messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Note: This menu item appears only in some printer models.
Print a Quick Test target page.
Note: Make sure that the margin spacing on the target page
is uniform all the way around the target. If it is not, then the
printer margins may need to be reset.
Manually register the flatbed and ADF after replacing the ADF,
scanner glass, or controller board.
Set the size, in millimeters, of the no‑print area around an ADF
or flatbed scan job.
Disable the scanner if it is not working properly.
Set the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.
66