Lexmark MB2236 User Manual page 71

Use printer menus
Menu item
Annotations
Print
Do Not Print*
Print PDF Error
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu item
Print PS Error
Off*
On
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
Off
On*
Wait Timeout
Disabled
Enabled*
Wait Timeout Time
15–65535 (40*)
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Name
[List of available fonts] (Courier*)
Symbol Set
[List of available symbol set] (10U
PC‑8*)
Pitch
0.08–100 (10*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify whether to print annotations in the PDF.
Enable the printing of PDF error.
Description
Print a page that describes the PostScript® error.
Note: When an error occurs, processing of the job stops, the printer
prints an error message, and the rest of the print job is flushed.
Set the minimum stroke width of any job printed in 1200 dpi.
Disable the SysStart file.
Enable the printer to wait for more data before canceling a print job.
Set the time in seconds for the printer to wait for more data before
canceling a print job.
Note: This menu item appears only when Wait Timeout is enabled.
Description
Select a font from the specified font source.
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific text.
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed‑space characters in a horizontal
inch of type.
71