Table of Contents
Advertisement
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON :
Pedal movement or press any button.
POWER OFF :
Automatically shuts off after 4 minutes of
inactivity.
FUNCTION BUTTONS:
MODE :
Press to select the function of the lower
readout.
RESET :
To reset all functions to zero.
FUNCTIONS:
SCAN:
Automatically scans each function of TIME, CALORIE, STRIDES/MIN in sequence with
change every 6 seconds.
COUNT :
Upper readout displays the total number of strides you have taken from zero to 9999
strides.
TIME:
Displays the riding time from 1 sec up to 99:59 minutes.
STRIDES/MIN:
Displays the rate of strides per minute.
CALORIE:
Displays the calorie burned from zero to 9999 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with a AA battery, the battery is not included.
Refer to the illustration to install or replace the battery.
NOTE:
1. Rechargeable batteries are not recommended.
2. Ultimate disposal of battery should be handled according to
all state and federal laws and regulations.
3. Do not dispose of batteries in fire.
10
STRIDES
/MIN
SCAN
SCAN
AA Battery
CNT
TIME
CAL
Advertisement
Table of Contents
