Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
STEP 1:
Lay the STEPPER on the floor as shown in the illustration A. Attach the BASE STAND(26) onto
the BASE FRAME(1) with ROUND HEAD BOLT(M6x1x20mm)(35).
STEP 2:
Turn the STEPPER to other side as shown in illustration B. Press the ENDCAPS(29) onto bother
sides of the BASE FRAME(1). Refer to illustration B and make sure the Key Rib in the STAND CAPS(28)
align with the slot in the Stabilizer of the UPRIGHT(2). Then press the STAND CAPS(28) onto both sides
of the UPRIGHT(2).
STEP 3:
Refer to illustration C. Raise the STEPPER to an upright position and unfold the STEPPER by
lifting the HANDLEBAR(4). Lock the HANDLEBAR(4) to the UPRIGHT(2) with the LOCKING KNOB(18)
and insert the LOCKING PIN(19) through the Bracket on the HANDLEBAR(4) and the UPRIGHT(2).
WARNING: When folding and unfolding the Space Mate Folding Stepper, keep all children away from
the Space Mate Folding Stepper and make sure your hands are clear of any folding or pinch
point.
A
B
8
C
Advertisement
Table of Contents
