Installing The Front Tires; Installing The Tie-Down Bracket - Toro 31902 Operator's Manual

Figure 10
1. Bolt (3/8 x 1-1/4 inches)
2. Small pin
D. Use 2 bolts (3/8 x 1-1/4 inches), 2 nuts (3/8
inch), and 2 small pins to secure the lift
arms to the cylinders
E. Torque the hose swivel nut on port C1
(Figure 9) to 41 N∙m (30 ft-lb).
Note:
You can use a backup wrench to
prevent the hose from twisting.
7. Grease the attachment pin joints and lift-arm
pin joints; refer to
Bushings (page 47).
5

Installing the Front Tires

Model 31902 Only
No Parts Required
Procedure
1. Use the previously-removed lug nuts to secure
the tires to the wheel hubs
3. Cylinder rod
4. Nut (3/8 inch)
(Figure 10).
Greasing the Bearings and
(Figure 11).
g312026
1. Wheel hub
2. Tire
2. Torque the wheel lug nuts; refer to
Wheel-Lug Nuts (page 57)
6
Installing the Tie-Down
Bracket
Model 31902 Only
Parts needed for this procedure:
1 Tie-down bracket
2 Bolt (3/8 x 3-1/4 inches)
2 Nut (3/8 inch)
Procedure
Use 2 bolts (3/8 x 3-1/4 inches) and 2 nuts (3/8 inch)
to secure the tie-down bracket to the platform
12).
15
Figure 11
3. Lug nut
Torquing the
g299550
(Figure