Table of Contents
Advertisement
Fixing the installation plate
plate hanger.
strong enough to withstand the product weight, the unit could fall and cause injury.
Assembling the hanger screw
Use 2 screws to fix the indoor unit with hanger plate as shown in the picture.
Disassembling/Assembling the Cover panel for indoor unit installation
In order to install the indoor unit, you must disassemble the cover panel first. Please proceed following
instructions to disassemble and assemble the cover panel. Hooks (on the cover panel) may get damaged if you
apply excessive force as you disassemble and assemble the cover panel. Please follow the following instructions.
Removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened
with screws. Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel.
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 40
Please scan
this QR code for detail
video of indoor unit
installation.
Cap Screw
English-40
<Remove the Cap screw>
Cover Panel
<Unfasten the screw>
Screw
2015/10/12 15:43:13
Advertisement
Table of Contents
