Disassembling/Assembling The Cover Panel For Indoor Unit Installation - Samsung AR09HCF Series User & Installation Manual

Disassembling/assembling the Cover panel for indoor unit installation

In order to install the indoor unit, you must disassemble the cover panel first . Please proceed following
instructions to disassemble and assemble the cover panel . Hooks (on the cover panel) may get damaged if you
apply excessive force as you disassemble and assemble the cover panel . Please follow the following instructions .
removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened
with screws . Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel .
removing the Cover panel (Before mounting the indoor unit)
The bottom panel fits the main body using the side, center, and bottom hooks as shown . Unlock the side hooks
first, and then unlock the center and bottom hooks .
Check the location of the hooks before removing the cover panel .
Center hooks
SG_GOOD_A3050_IB&IM_EN_DB68-05200A-03.indd 38
Please scan
this QR code for detail
video of indoor unit
installation .
Cap Screw
f Location of the hooks on the central part
Side
hooks
Bottom hooks
 For specific Hook location and quantity, please
English-38
<Remove the Cap screw>
Cover Panel
<Unfasten the screw>
f
number and location of the hooks
Center hook
refer to cover panel with indicating arrows based
on physical goods .
Bottom hook
2/2/2016 8:26:21 AM