Table of Contents
Advertisement
Disassembling/Assembling the Cover panel for indoor unit installation
In order to install the indoor unit, you must disassemble the cover panel first . Please proceed following
instructions to disassemble and assemble the cover panel . Hooks (on the cover panel) may get damaged if you
apply excessive force as you disassemble and assemble the cover panel . Please follow the following instructions .
Removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened
with screws . Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel .
Removing the Cover panel (Before mounting the indoor unit)
Cover panel is fixed to a main body of the product with hooks on two sides and central part as shown in the
illustration . Release the hooks on the sides first, and then release the hooks on the central part .
Check the location of the hooks before removing the cover panel .
A3050 EU_IM_DB68-04212A_HP_EN.indd 10
Please scan
this QR code for detail
video of indoor unit
installation .
Cap Screw
f Location of the hooks on the central part
Side
part
Central part
For specific Hook location and quantity, please refer
English-10
<Remove the Cap screw>
Cover Panel
<Unfasten the screw>
Number and location of the hooks
Hook
to cover panel with indicating arrows based on
physical goods .
2013-10-23 16:31:12
Hide quick links:
Advertisement
Table of Contents
