Using The Auto Clean Function; Setting The Beep Sound - Samsung AR7000 Manual

Using the Auto clean function

Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.
When the air conditioner is operating;
Indoor unit display

Setting the Beep sound

Beep sound from the indoor unit can be muted.
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 24
1. Press the Settings button.
2. Press the , or Settings button until (Clean) indicator starts to blink.
3. Press the SET button to set the Auto clean function.
- 3 seconds after setting Auto clean function, (Clean) indicator on the remote
controller display will disappear and Auto clean (
turn on the indoor unit display. Auto clean function will be activated after the air
conditioner stops operating.
- Duration of the Auto clean function can be different depending on the previous
operation mode used.
Auto(cool), Cool, Dry mode : 30 minutes.
Auto(heat), Heat, Fan mode: 15 minutes.
Press the Settings button
Cancel
make the (Clean) indicator blink and press the SET button.
When the operation mode is set during Auto clean function is activated,
the air conditioner will operate in chosen operation mode and the Auto
clean function will be re-activated when the operation stops.
flow blade will remain open to allow the indoor coil to dry.
1. Press the Settings button.
2. Press the , or Settings button until (Beep) indicator starts to blink.
3. Press the SET button to mute the beep sound.
- 3 seconds after setting Beep sound function, (Beep) indicator on the remote
controller display will disappear and Beep sound function will begin.
English-24
), Timer ( ) indicator will
Press the , or Settings button to
2015/10/12 15:43:06