Table of Contents
Advertisement
Charging the refrigerant under conditions of liquid by using a liquid pipe
R-410A is a mixed type of refrigerant. It is necessary for recharging under conditions of liquid. When recharging refrigerant from
the refrigerant cylinder to the equipment, follow the instructions below.
1. Before recharging, check whether the cylinder has a siphon or not.
There are two ways to recharge the refrigerant.
Cylinder with siphon
Charge the refrigerant standing the
cylinder upright.
characteristics of the equipment vary.
If cylinder doesn't have syphon, upset it.
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 51
Siphon
English-51
Cylinder without siphon
Charge the refrigerant turning the cylinder
upside down.
2015/10/12 15:43:19
Advertisement
Table of Contents
