Adjusting Settings - Nikon Z 8 Reference Manual

Adjusting Settings

Use the [HDMI] item in the setup menu to adjust settings for HDMI output.
Option
The format for output to HDMI devices can be selected from [Auto],
[Output
[4320p (progressive)], [2160p (progressive)], [1080p (progressive)], [1080i
resolution]
(interlaced)],
The RGB video signal input range varies with the HDMI device. [Auto], which
matches the output range to the HDMI device, is recommended in most
situations. If the camera is unable to determine the correct RGB video signal
[Output output range for the HDMI device, you can choose from the following options:
range]
Choose whether shooting information is displayed on the HDMI device. If [ON]
[Output
is selected, icons and other information in the shooting display will be recorded
shooting info]
with the footage saved to external recorders.
Choose whether the display in the camera monitor remains on while an HDMI
device is connected.
[Mirror
camera info
display]
* Video will not be output at 1080i when [Auto] is selected for [Output resolution] even when a
recorder that supports this option is connected. Choose [1080i (interlaced)] for interlaced output.
*
and [720p (progressive)].
[Limited range]: For devices with an RGB video signal input range of 16 to
235. Choose this option if you notice a loss of detail in shadows.
[Full range]: For devices with an RGB video signal input range of 0 to 255.
Choose this option if you notice that shadows are "washed out" or too bright.
If [OFF] is selected, the display will remain off, reducing the drain on the
camera battery.
[Mirror camera info display] will be fixed at [ON] while [OFF] is selected for
[Output shooting info].
Description
293
Recorders