Applying Saved Modes - Nikon Z 8 Reference Manual

4
Save changes.
Press J to save changes and exit to the menus.
Modes that have been altered from default values are indicated by asterisks ("U").
Repeat Steps 1 through 4 to create additional modes.

Applying Saved Modes

To enable portrait impression balance during shooting, select the desired mode ([Mode 1] through
[Mode 3]) for [Portrait impression balance] in the photo shooting menu.
D
"Portrait Impression Balance"
[Portrait impression balance] will not be available if:
[Monochrome] or [Creative Picture Control] is selected for [Set Picture Control], or
[Monochrome] is selected for [Set Picture Control (HLG)].
Tip: Previewing the Results
If [Portrait impression balance] has been assigned a place in the i menu using Custom Setting f1
[Customize i menu], you can select this option, rotate the main command dial to choose a mode,
and then adjust hue and brightness using the multi selector while previewing their effects on the
subject framed in the display.
456
Portrait Impression Balance