Connecting Via Wi-Fi (Wi-Fi Mode) - Nikon Z 8 Reference Manual

Connecting via Wi-Fi (Wi-Fi Mode)

In Wi-Fi mode, the camera connects directly to the smart device via Wi-Fi, no Bluetooth pairing
required.
D
Before Connecting (Wi-Fi Mode)
Enable Wi-Fi on the smart device. For details, see the documentation provided with the device.
Ensure that the batteries in the camera and smart device are fully charged to prevent the devices
turning off unexpectedly.
Check that there is space available on the camera memory card.
Connecting
Follow the steps below to establish a connection between the camera and smart device in Wi-Fi mode.
Some operations are performed using the camera, others on the
smart device.
Additional instructions are available via SnapBridge online help.
1
Smart device: Launch the SnapBridge app, open the
mode].
If this is the first time you have launched the app, you should instead tap [Connect to camera]
in the welcome display. When prompted, tap the category for your camera and then tap the
"Wi‑Fi" option when prompted to choose the connection type.
2
Camera/smart device: Turn the camera on when prompted.
Do not use any of the controls in the app at this point.
tab, tap
305
, and select [Wi-Fi
Wireless Connections