Wireless Remote (Wr) Options; Led Lamp - Nikon Z 8 Reference Manual

Wireless Remote (WR) Options

Adjust status LED and link mode settings for optional WR‑R11a and WR‑R10 wireless remote
controllers. You can also choose a link mode for connection to optional radio-controlled flash units
that support Advanced Wireless Lighting.
D
WR‑R10 Wireless Remote Controllers
A WR‑A10 adapter is required when using the WR‑R10.
Be sure the firmware for the WR‑R10 has been updated to the latest version (version 3.0 or later).
For information on firmware updates, see the Nikon website for your area.

LED Lamp

Enable or disable the status LEDs on the WR‑R11a or WR‑R10 wireless remote controller mounted on
the camera. For more information, see the documentation supplied with the wireless remote controller.
749
G button U B setup menu
Wireless Remote (WR) Options