Copying Pictures To A Computer Using Nx Studio - Nikon Z 8 Reference Manual

Copying Pictures to a Computer Using NX Studio
See online help for detailed instructions.
1
Connect the camera to the computer.
After turning the camera off and ensuring that a memory card is inserted, connect the supplied
USB cable as shown. Be sure to connect the cable to the camera's USB data connector. The
computer will not detect cameras connected via the USB Power Delivery connector.
Tip: Using a Card Reader
Pictures can also be copied from memory cards inserted in third-party card readers connected
to the computer. You should however check that the card is compatible with the card reader.
2
Turn the camera on.
The Nikon Transfer 2 component of NX Studio will start. Nikon Transfer 2 image transfer
software is installed as part of NX Studio.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
If Nikon Transfer 2 does not start automatically, launch NX Studio and click the "Import" icon.
311
Computers: Connecting via USB