Nikon Z 8 Reference Manual page 381

6
Obtain or select an IP address.
Highlight one of the following options and press J.
Option
[Obtain
automatically]
[Enter
manually]
7
Press J to proceed when the "configuration complete" message is displayed.
The camera will initiate the connection. The profile name is displayed when a connection is
established.
8
Highlight [Group name], press 2, and enter a group name.
Enter a group name for the synchronized cameras. Group
names can be up to eight characters long.
All master and remote cameras on the network must be in
the same group.
Select this option if the network is configured to supply the IP address
automatically. A "configuration complete" message will be displayed
once an IP address has been assigned.
It is recommended that you note the remote camera IP address, as
you will need it in subsequent steps.
Enter the IP address and sub-net mask manually.
Press J; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J to save
changes.
Next, press X; a "configuration complete" message will be displayed.
Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a "configuration
complete" message will be displayed.
381
Description
Synchronized Release