Setting The Number Of Rings To Answer - Epson C11CK57201 User Manual

3. Select Fax Settings and press the OK button.
4. Use the arrow and OK buttons to select Basic Settings > Line Type > PBX.
5. Select Use and press the OK button to activate the setting.
6. Select Access Code and press the OK button.
7. Use the displayed keypad to enter the access code, such as 9, and press the OK button.
Note: You cannot send faxes to recipients in Contacts when an access code is set. If you registered
recipients in Contacts using an external access code, set the Access Code to Do Not Use.
Otherwise, you need to change the code to # in Contacts.
Parent topic:

Setting the Number of Rings to Answer

If you connect an external answering machine and select to receive faxes automatically, make sure the
Rings to Answer setting is correct. The number of rings should be higher than the number of rings your
answering machine is set to for answering a call.
1. Press the
2. Press the arrow buttons to select Settings, then press the OK button.
3. Select Fax Settings and press the OK button.
4. Select Basic Settings and press the OK button.
5. Set Receive Mode to Auto.
6. Enter the number of rings and press the OK button. Make sure to select a number higher than the
number of rings your answering machine is set to for answering a call.
Note: An answering machine picks up every call faster than the product, but the product can detect fax
tones and start receiving faxes. If you answer the phone and hear a fax tone, check that the product has
started receiving the fax, then hang up the phone.
Setting Up Basic Fax Features
home button, if necessary.
158