Fcc Compliance Statement - Epson C11CK57201 User Manual

The default value of the administrator password is printed on the product's label, as shown. The label is
located on the side where the cover is opened, the back, or the bottom, depending on the product.
1 The default administrator password when multiple labels are attached
2 The default password is the product's serial number when only one label is attached
You must enter the default administrator password when performing the following operations:
• Updating your product's firmware from a computer or smart device
• Accessing the advanced settings in Web Config
• Using applications, such as Fax Utility, that can change the product's settings
You can change the administrator password from the product's control panel or Web Config. The new
password must be 8 characters or more. If you restore the product to default settings (Settings >
Restore Default Settings > Clear All Data and Settings), the administrator password resets to the
product serial number.
Parent topic:

FCC Compliance Statement

For United States Users
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for Terminal Attachments ("ACTA"). On the surface of this equipment is a label
that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
Applicable certification jack Universal Service Order Codes ("USOC") for the equipment: RJ11C.
Important Safety Instructions
319