Table of Contents
Advertisement
www.ti.com
Because of the large number of inputs required to define all eight custom filters (8 × 12 = 96 coefficients),
the GUI provides a means for loading coefficients from a text file, saving coefficients to a text file, and
resetting filter coefficient values.. This control is located in the bottom right corner of Channel Filter tab. As
shown in
Figure
76, Reset Channels can be applied to only Pre-stored Filters, only Custom Filters, or to
all filters.
The Save/Load Custom Filter Coeffs drop-down menu, as shown in
currently displayed channel's custom coefficients to a file or all channels' custom coefficients to a file.
SLAU491 – May 2013
Submit Documentation Feedback
Figure 75. Channel 1 Custom Digital Filter Enabled
Figure 76. Reset Channels on Channel Filter Tab
ADS5296, 4-Channel 200-MSPS, and 8-Channel 80-MSPS, Analog-to-Digital
Copyright © 2013, Texas Instruments Incorporated
ADS5296 GUI in Detail
Figure
77, can be used to save the
Converter Evaluation Module
65
Advertisement
Table of Contents
