Table of Contents
Advertisement
www.ti.com
2
GUI Software Installation
The ADS5296 EVM and the TSW1400 EVM both require software installations. The following two sections
explain where to find and how to install the software properly. Ensure that no USB connections are made
to the EVMs until after the installations are complete.
2.1
TSW1400 EVM GUI Installation (High Speed Data Converter Pro (HSDCpro))
From the Texas Instruments website, www.ti.com, search for TSW1400. Under Technical Documents, one
will find a Software section from which High Speed Data Converter Pro GUI Installer can be
downloaded and saved (slwc107e.zip or higher).
•
Unzip the saved folder and run the installer executable to obtain the menu shown in
•
Click the Install button.
•
Set the destination directories, or leave as default, for the TSW1400 GUI installation and press the
Next button as shown in
SLAU491 – May 2013
Submit Documentation Feedback
Figure 2. HSDCpro Install (a)
Figure
3.
ADS5296, 4-Channel 200-MSPS, and 8-Channel 80-MSPS, Analog-to-Digital
Copyright © 2013, Texas Instruments Incorporated
GUI Software Installation
Figure
2.
Converter Evaluation Module
5
Advertisement
Table of Contents
