Table of Contents
Advertisement
Testing ADS5296 EVM
4. By default, Channel 1/8 is the first channel displayed. Use the drop-down menu shown in
view all 8 channels and confirm that a saw tooth waveform has been captured. Also confirm, in the
menu to the left side, that the min code is 0 and the max code is 4095, corresponding to a 12-bit ADC.
32
ADS5296, 4-Channel 200-MSPS, and 8-Channel 80-MSPS, Analog-to-Digital
Converter Evaluation Module
Figure 33. RAMP Capture
Copyright © 2013, Texas Instruments Incorporated
www.ti.com
Figure 34
to
SLAU491 – May 2013
Submit Documentation Feedback
Advertisement
Table of Contents
