Toro Workman MDX Operator's Manual page 40

2. Carefully lift the seats, seat base, and parking
brake cables from the machine
Important:
Note the routing of the
parking-brake cables along the chassis as
you lift the seats and seat base from the
machine.
Replacing the Carbon Canister
1. Remove the vacuum hose from the fitting on the
carbon canister marked Purge
1. Vacuum hose
2. Fuel-tank hose
3. Carbon-canister fitting
(Fuel Tank)
2. Remove the fuel-tank hose from the fitting on the
carbon canister marked Fuel Tank
3. Lift the carbon canister from the carbon-canister
mount in the fuel tank
(Figure
Figure 42
(Figure
Figure 43
4. Carbon-canister fitting
(Purge)
5. Front of the machine
(Figure
(Figure 44).
41).
g029659
1. Carbon canister
2. Carbon-canister mount
(fuel tank)
43).
4. Remove the carbon-canister filter and the short
section of hose from the lower fitting of the old
carbon canister
g029627
1. Lower fitting (carbon
canister)
2. Hose
5. Install the hose onto the lower fitting of the new
carbon canister
43).
6. Insert the fitting of a new carbon-canister filter
into the hose
40
Figure 44
3. Front of the machine
(Figure 45).
Figure 45
3. Carbon-canister filter
(Figure 45).
(Figure 45).
g029628
g029660