∫
To change the type of
Select the menu.
MENU
: [SW SETUP] # [WFM TYPE] # desired setting
[WAVE]:
[VECTOR]:
[WAVE/VECTOR]:
≥ This function is not available in the following cases:
j When using Focus Assist
j During Freeze Frame
j When color bars are displayed
∫
To change the display position of
Select the menu.
MENU
: [SW SETUP] # [WFM POSITION] # desired setting
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
≥ You can also change the waveform position to the upper left, upper right, bottom left or bottom
right by performing one of the following operations while a waveform is displayed:
j Rotating the jog dial
j Sliding the waveform while touching it.
[FAST ZOOM]
≥ Register [FAST ZOOM] to a USER button.
You can use Fast Zoom when operating the zoom with the zoom lever.
[EVF ON/OFF]
≥ Register [EVF ON/OFF] to a USER button.
This forces the viewfinder to turn on/off.
≥ After the viewfinder turns on, if the eye sensor detects your eye when it is moved closer to the eye
cup of the viewfinder the [EVF ON/OFF] setting will be canceled.
≥ When the [LCD/EVF OUTPUT] is set to [LCD], this item cannot be set.
WFM
Displays waveforms as waves.
Displays waveforms as vectors.
Switches the setting each time the applicable USER button is pressed.
(l
57)
(l
91)
(l
109)
- 98 -
WFM
(l
84)
(l
84)
(l
50)
(l
33)