Linking to external devices
Using an iPad as a Remote Control
(AG ROP application)
Attaching a wireless module that support this unit
allows you to connect to a wireless LAN network. You can remotely control some functions by
connecting this unit and an iPad on which the AG ROP application is installed.
A Wireless module that support this unit
B Direct connection
C Wireless access point connection
D iPad and AG ROP application
You can perform the following remote control operations with the AG ROP application:
≥ Checking the camera status
≥ Checking the thumbnails of the recorded scenes
≥ Playing back scenes recorded as sub recordings with [DUAL CODEC REC] set to [FHD 8Mbps]
≥ Controlling the camera remotely (recording control and Time Code/User Information operations)
≥ For information on how to operate the AG ROP application, refer to its Help.
≥ You can store a wireless module in the hand strap.
USB
HOST
(l
147) to the USB HOST terminal of this unit
- 146 -