Panasonic AG-UX170 Operating Instructions Manual page 58

Using Focus Assist
≥ Switch to Manual Focus Mode.
Press the FOCUS ASSIST button or the USER button
to which [FOCUS ASSIST 1] or [FOCUS ASSIST 2] is
registered.
≥ You can also use Focus Assist by touching the USER button
icon to which [FOCUS ASSIST 1] or [FOCUS ASSIST 2] is
registered.
≥ To turn off Focus Assist, perform the following operations:
j Press the FOCUS ASSIST button or the USER button again,
or touch the USER button icon again.
j Touch [EXIT].
∫ To adjust the magnified display
If you set Focus Assist to ON by following either of the procedures below, the central area of the
screen will be magnified. You can change the magnification and position of the magnified display.
j Setting the menu item [FOCUS ASSIST 1] to [EXPAND] or [BOTH] and pressing the FOCUS
ASSIST button or the USER button to which [FOCUS ASSIST 1] is registered.
j Setting the menu item [FOCUS ASSIST 2] to [EXPAND] and pressing the USER button to
which [FOCUS ASSIST 2] is registered.
≥ You can also change the magnification level of the magnified display using the jog dial.


(To change the magnification level)
Touch / or rotate the jog dial to change the magnification level.
: Increases the magnification level by 0.5k.
: Decreases the magnification level by 0.5k.
≥ You can adjust the magnification from 3k to 10k.
(Moving the magnified area)
Touch / /
area.
(l 53)
 

SEL/
PUSH
SET
/ or slide the screen while touching it to move the magnified

x3.0 x3.0 x3.0

A 3 k k display
–5
k k
B 5.5 –10
C [ASSIST]
D Magnified display
E [EXIT]
F Jog dial
- 58 -
x5.5 x5.5 x5.5

display
FOCUS
ASSIST