Panasonic AG-UX170 Operating Instructions Manual page 63

To set the Focus Transition time
1 Select the menu.
MENU
: [RECORD SETUP] # [FOCUS TRANSITION TIME]
2 Touch the desired setting item.
[DIRECT]/[FASTEST]/[2-15 SEC.]/[20 SEC.]/[30 SEC.]/[45 SEC.]/[60 SEC.]/[90 SEC.]
≥ If you select [DIRECT], the focus position changes as soon as Focus Transition starts, but the
operating noise of the lens may be recorded.
3
(If you have selected [2-15 SEC.] in Step 2)
Touch /
≥ You can set a Focus Transition time of 2 s 15 seconds (by 0.5 second increments).
≥ Touch [RETURN].
4 Touch [EXIT] to complete the setting.
To start Focus Transition and recording simultaneously
You can start Focus Transition and recording simultaneously by enabling
[FOCUS TRANSITION REC].
1 Select the menu.
MENU
: [RECORD SETUP] # [FOCUS TRANSITION REC]
2 Touch the item.
[1]/[2]/[3]
3 Touch [EXIT] to complete the setting.
4 When the recording screen is displayed, press the USER button to which
[FOCUS TRANS] is registered or touch the applicable USER button icon.
5 Press the recording start/stop button or the USER button to which [
] is registered.
REC
≥ Recording and Focus Transition will start simultaneously. Focus will shift to the position you have
set in Step 2.
To set the length of time before Focus Transition starts
Select the menu.
MENU
: [RECORD SETUP] # [FOCUS TRANSITION WAIT] # desired time
[0 SEC.]/[5 SEC.]/[10 SEC.]
to set the duration.
- 63 -
AUTO