Panasonic AG-UX170 Operating Instructions Manual page 177

[WFM]
This enables/disables the Wave Form Monitor function.
[ON]/[OFF]
[WFM TYPE]
This sets the type of Wave Form Monitor.
[WAVE]/[VECTOR]/[WAVE/VECTOR]
[WFM POSITION]
This sets the display positions of Wave Form Monitor.
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
[ZEBRA]
Switch between the zebra display and marker display.
[ZEBRA 1]/[ZEBRA 2]*/[MARKER]*/[OFF]
* Not displayed when [ZEBRA DETECT 2]/[MARKER] is set to [ OFF ].
≥ For information on the zebra display and marker display, refer to page 99.
[ZEBRA MODE]
This sets the display duration of the zebra display.
[CONTINUE]: Displays the zebra display until it is switched to another zebra display setting.
[MOMENT]: Displays the zebra display for approximately 5 seconds.
[BARS TYPE]
You can switch the type of color bars to be displayed when you press the BARS button.
[TYPE 1]
(l 97)
(l 98)
(l 98)
[TYPE 2]
- 177 -
(l 195)
(l
[TYPE 3]
109)