Installing processors on the new system board
"Installing the processor" on page
Ê
Installing protective socket covers on the defective system board
I
Since the defective system board is sent back for repair, protect the
delicate processor socket springs with a socket cover.
"Installing the processor" on page 137
Ê
9.5.2.4
Completing the system board
"Installing the UFM board" on page 165
Ê
"Installing the SATA DOM board" on page 153
Ê
"Installing the iRMC microSD card" on page 175
Ê
"Installing the riser module" on page 43
Ê
I
Install the expansion cards into their original slots.
"Installing a memory module" on page 122
Ê
I
Install the memory modules into their original slots.
Ê Reconnect all cables to the system board. For a complete cabling overview,
please refer to section
9.5.3
Concluding steps
Perform the following steps:
"Installing the server node in the server enclosure" on page 50
Ê
Ê If applicable, reconnect all external cables.
"Controls and indicators on the server node" on page 51
Ê
"Verifying system information backup / restore" on page 67
Ê
"Using the Chassis ID Prom Tool" on page 82
Ê
CX2550 M2
137.
"Cabling overview" on page
Upgrade and Maintenance Manual
System board and components
(if applicable)
(if applicable)
(if applicable)
206.
185